1. Producte acabatview
The ID-COOLING IS-55 Black CPU Cooler is a low-profile air cooling solution designed for efficient heat dissipation in compact systems. With a total height of only 57mm, it is ideal for HTPCs, ITX, and Small Form Factor (SFF) builds. It features 5 heat pipes and a 120mm PWM fan to ensure excellent thermal performance while maintaining low noise levels.
Figure 1: ID-COOLING IS-55 Black CPU Cooler, showcasing el seu disseny compacte.
2. Característiques clau
- Better Heat Dissipation: Equipped with 5 heat pipes and a 120mm PWM fan for excellent heat transfer from the CPU.
Figure 2: Close-up of the copper base, designed for rapid heat absorption from the processor.
Figure 3: Illustration of airflow through the heatsink, demonstrating efficient heat dissipation.
- Pro baixfile Disseny: Ultra-compact with only 57mm total height, making it ideal for HTPCs, ITX, and Small Form Factor builds.
Figure 4: The IS-55 cooler installed in a small form factor PC case, highlighting its compact fit.
- Ventilador PWM: The 120x120x15mm PWM fan provides low-noise operation with automatic speed control for optimal CPU cooling performance. Max. Air Flow: 54.6CFM; Noise Level: 13.8-31.2dB(A).
Figure 5: The PWM fan, illustrating its ability to adjust speeds for balanced noise and airflow.
- Compatibilitat de la memòria RAM: The small-size CPU cooler design ensures excellent memory compatibility, even on Mini-ITX motherboards.
Figure 6: Diagram showing the cooler's clearance for RAM modules, indicating compatibility with various memory heights.
- Compatibilitat: Supports Intel LGA 1851/1700/1200/1151/1150/1155/1156 and AMD AM5/AM4 sockets.
3. Què hi ha a la caixa
The ID-COOLING IS-55 Black CPU Cooler package includes the following components:
- Dissipador de calor
- Cooling Fan (120x120x15mm PWM)
- Mounting Hardware for Intel and AMD platforms
- Pasta tèrmica
Figure 7: All components included in the ID-COOLING IS-55 CPU cooler package, including the heatsink, fan, and various mounting accessories.
4. Configuració i instal·lació
Proper installation is crucial for optimal performance. Please follow these general steps. Refer to your motherboard's manual for specific socket instructions.
- Prepareu la placa base: Ensure your motherboard is removed from the PC case or has sufficient access for cooler installation.
- Instal·leu la placa posterior (si cal): For Intel sockets, attach the appropriate backplate to the rear of the motherboard, aligning it with the CPU cooler mounting holes. AMD AM4/AM5 typically use the stock backplate.
- Col·loqueu els suports de muntatge: Secure the correct mounting brackets to the heatsink base using the provided screws. Ensure they are firmly attached.
- Aplicar pasta tèrmica: Clean the CPU surface thoroughly. Apply a small amount of thermal paste (included) to the center of the CPU's integrated heat spreader (IHS). A pea-sized dot is usually sufficient.
- Mount the Cooler: Carefully place the heatsink assembly onto the CPU, aligning the mounting screws with the holes on the backplate or motherboard retention module. Tighten the screws in a diagonal pattern (e.g., top-left, bottom-right, top-right, bottom-left) until snug, ensuring even pressure. Do not overtighten.
- Connectar el cable del ventilador: Connecteu el cable del ventilador PWM de 4 pins al capçalera CPU_FAN de la placa base.
- Verifica la instal·lació: Double-check that the cooler is securely mounted and the fan cable is properly connected. Ensure there is no interference with RAM modules or other components.
Video 1: An official demonstration of the ID-COOLING IS-55 Black CPU Cooler, including a visual overview of its features and a brief look at its installation process within a compact PC build.
5. Instruccions de funcionament
The ID-COOLING IS-55 CPU Cooler operates automatically once installed and powered on. The 120mm PWM fan adjusts its speed based on the CPU temperature, as controlled by your motherboard's BIOS/UEFI settings or operating system software.
- Control automàtic de velocitat: The fan's PWM (Pulse Width Modulation) function allows the motherboard to precisely control its rotational speed (RPM) in response to the CPU's thermal load. This ensures efficient cooling when needed and quiet operation during lighter tasks.
- Configuració de la BIOS/UEFI: For advanced users, fan curves can be customized within your motherboard's BIOS/UEFI settings to prioritize noise levels or cooling performance according to your preference.
- Seguiment: You can monitor CPU temperatures and fan speeds using various software utilities available for your operating system.
6. Manteniment
Un manteniment regular ajuda a garantir la longevitat i el rendiment òptim del refrigerador de la CPU.
- Neteja de pols: Periodically inspect the heatsink fins and fan blades for dust accumulation. Use compressed air or a soft brush to gently remove dust. Ensure the fan is held stationary while cleaning with compressed air to prevent over-spinning and potential damage.
- Reaplicació de pasta tèrmica: Over time, thermal paste can dry out, reducing its effectiveness. It is recommended to reapply thermal paste every 2-3 years, or if you remove the cooler for any reason. Clean both the CPU IHS and the cooler's base thoroughly before applying new thermal paste.
- Inspecció del ventilador: Check the fan for any unusual noises or wobbling. If the fan becomes excessively noisy or stops spinning, it may need to be replaced.
7. Solució De Problemes
If you encounter issues with your CPU cooler, consider the following common troubleshooting steps:
- Temperatures altes de la CPU:
- Ensure the cooler is securely mounted and making good contact with the CPU. Uneven pressure can lead to poor heat transfer.
- Verify that thermal paste was applied correctly and is not dried out. Reapply if necessary.
- Check for proper airflow within your PC case. Ensure case fans are configured to provide adequate intake and exhaust.
- Confirm the CPU fan is spinning.
- Fan Not Spinning or Spinning Slowly:
- Check if the fan cable is securely connected to the CPU_FAN header on the motherboard.
- Enter your motherboard's BIOS/UEFI and check fan speed settings. Ensure PWM control is enabled and the fan curve is appropriate.
- Test the fan by connecting it to a different fan header (if available) or a fan controller to rule out a faulty fan.
- Soroll excessiu:
- Check for dust buildup on the fan blades or heatsink fins. Clean thoroughly.
- Assegureu-vos que no hi hagi cables que obstrueixin les aspes del ventilador.
- If the noise is a grinding or rattling sound, the fan bearing may be failing. Consider replacing the fan.
- Ajusta la configuració de la velocitat del ventilador a la BIOS/UEFI a un professional més silenciósfile si les temperatures ho permeten.
8. Especificacions
| Atribut | Valor |
|---|---|
| Dimensions del producte | 4.72"L x 0.59"W x 4.72"H (Fan) |
| Marca | ID-REFREDAMENT |
| Tipus de connector d'alimentació | PWM de 4 pins |
| Voltage | 12 Volts |
| Wattage | 2.64 watts |
| Mètode de refrigeració | Aire |
| Dispositius compatibles | Desktop (Intel LGA 1851/1700/1200/1151/1150/1155/1156 and AMD AM5/AM4) |
| Nivell de soroll | 13.8-31.2 dB(A) |
| Material | Copper (base), Aluminum (fins) |
| Velocitat de rotació màxima | 3300 RPM |
| Capacitat de cabal d'aire | 54.6 peus cúbics per minut (CFM) |
| Pes de l'article | 15.9 unces |
| Número de model | IS-55-BLACK |
| Data de primera disponibilitat | 19 de setembre de 2022 |
Figure 8: Detailed dimensions of the 120x120x15mm fan used in the IS-55 cooler.
9. Garantia i Suport
For warranty information, technical support, or further inquiries regarding your ID-COOLING IS-55 Black CPU Cooler, please contact ID-COOLING directly or refer to their official weblloc.
You can visit the official ID-COOLING store for more information: ID-COOLING Store
