1. Introducció
This manual provides detailed instructions for the proper use, setup, and maintenance of your YATO YT-72453 Digital Dial Indicator. This precision measuring instrument is designed for accurate dimensional measurements in various applications. Please read this manual thoroughly before operating the device to ensure safe and efficient use.
2. Informació de seguretat
- Always handle the dial indicator with care to prevent damage to the precision components.
- Eviteu deixar caure l'instrument o sotmetre'l a impactes forts.
- No exposeu el dispositiu a temperatures extremes, humitat o llum solar directa.
- Keep the measuring probe and spindle clean and free from dust, oil, or other contaminants.
- Store the indicator in its protective case when not in use.
- Do not attempt to disassemble or modify the instrument, as this will void the warranty and may cause damage.
3. Producte acabatview
The YATO YT-72453 is a digital dial indicator featuring an easy-to-read LCD display and intuitive controls for precise measurements. Key components include:
- Pantalla LCD: Shows measurement readings in metric (mm) or imperial (inch) units.
- Measuring Probe/Spindle: The movable part that contacts the surface to be measured.
- Mounting Stem: Used to secure the indicator to a stand or fixture.
- Botons:
- inch/mm: Toggles between metric and imperial units.
- OFF / ON: Encén o apaga el dispositiu.
- ZERO: Sets the current position as the zero reference point.
Figura 1: Frontal view of the YATO YT-72453 Digital Dial Indicator, showing the LCD display and control buttons.
4. Configuració
4.1 Desembalatge
Carefully remove the YATO YT-72453 Digital Dial Indicator from its protective plastic case. Inspect the instrument for any signs of damage during transit. Ensure all components are present.
Figure 2: The YATO YT-72453 Digital Dial Indicator stored in its red protective plastic case.
4.2 Muntatge de l'indicador
The dial indicator is typically mounted onto a stable stand or fixture using its mounting stem. Securely fasten the stem in the clamp of your chosen stand, ensuring the indicator is stable and perpendicular to the surface being measured, if required for your application.
5. Instruccions de funcionament
5.1 Encès/Apagat
Premeu el botó OFF/ON button to power the indicator on. Press and hold the OFF/ON button for a few seconds to power it off.
5.2 Conversió d'unitats
Premeu el botó polzades / mm button to switch between metric (millimeters) and imperial (inches) measurement units. The selected unit will be displayed on the LCD.
5.3 Posar a zero la pantalla
To set a reference point:
- Position the measuring probe against the surface or object that will serve as your zero reference.
- Ensure the probe is stable and making proper contact.
- Premeu el botó ZERO button. The display will reset to 0.00, and subsequent movements of the probe will show the deviation from this zero point.
5.4 Prendre una mesura
After zeroing, move the measuring probe to the point you wish to measure. The LCD display will show the precise displacement from your set zero point. For consistent readings, ensure the probe moves smoothly and without lateral force.
6. Manteniment
- Neteja: Wipe the instrument body and display with a soft, dry cloth. For stubborn dirt, a slightly damp cloth can be used, but ensure no liquid enters the electronic components. Do not use solvents or abrasive cleaners.
- Cura de la sonda: Keep the measuring probe tip clean. If necessary, gently clean it with a soft cloth.
- Emmagatzematge: When not in use, store the YATO YT-72453 Digital Dial Indicator in its original protective plastic case to shield it from dust, moisture, and physical damage.
7. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| La pantalla està en blanc o parpelleja. | Low or depleted internal battery (if applicable). | As per product specifications, user-replaceable batteries are not required. If the display is blank, ensure the device is powered on. If the issue persists, contact customer support. |
| Lectures inexactes. | Dirt on probe/spindle; improper zeroing; device not stable. | Clean the probe and spindle. Re-zero the device carefully. Ensure the indicator is securely mounted and stable. |
| Els botons no responen. | Mal funcionament del dispositiu. | Try powering the device off and on again. If the issue persists, contact customer support. |
8. Especificacions
| Número de model | YT-72453 |
| Marca | YATO |
| Interval de mesura | 0 - 12.7 mm (0 - 0.5 polzades) |
| Precisió / Resolució | 0.01 mm |
| Mostra | LCD |
| Escala | Mètric, Imperial |
| Dimensions del producte (L x A x A) | 9 x 6 x 10 cm |
| Pes del producte | 100 grams |
| Embalatge | Caixa de plàstic |
9. Garantia i Suport
9.1 Informació de la garantia
Specific warranty details for the YATO YT-72453 Digital Dial Indicator are not provided in this manual. For information regarding warranty coverage, terms, and conditions, please refer to the documentation included with your purchase or contact the retailer or YATO customer service directly.
9.2 Atenció al client
If you encounter any issues or have questions not covered in this manual, please contact your point of purchase or the official YATO customer support for assistance. When contacting support, please have your product model number (YT-72453) and purchase details readily available.
