YATO YT-72450 Measuring Clock Instruction Manual

1. Introducció

This manual provides essential information for the safe and effective use of your YATO YT-72450 Measuring Clock. Please read this manual thoroughly before operating the device and retain it for future reference. The YATO YT-72450 is a precision analog dial indicator designed for accurate measurement of linear dimensions, run-out, and other geometric tolerances.

2. Informació de seguretat

• Always handle the measuring clock with care to avoid damage to its delicate internal mechanisms.
• No deixeu caure el dispositiu ni el sotmeteu a impactes forts.
• Keep the measuring clock clean and free from dust, dirt, and corrosive substances.
• Store the device in its protective case or a clean, dry environment when not in use.
• Eviteu exposar el dispositiu a temperatures o humitat extremes.
• Do not attempt to disassemble or repair the measuring clock yourself. Refer to qualified personnel for service.

3. Producte acabatview

The YATO YT-72450 Measuring Clock features a clear analog display for precise readings. Key components include the main dial, small revolution counter, bezel, stem, and contact point.

Figure 1: YATO YT-72450 measuring clock shown with its original packaging box.

Figura 2: Frontal view of the YATO YT-72450 measuring clock, detailing the main dial, revolution counter, and measurement markings.

Figura 3: lateral view of the YATO YT-72450 measuring clock, illustrating the mounting lug for securing the device and the measuring stem.

4. Configuració

1. Desembalatge: Carefully remove the measuring clock from its packaging. Inspect for any visible damage.
2. Muntatge: The measuring clock is typically mounted on a suitable stand or fixture using its stem (8mm diameter) or the lug on the back. Ensure it is securely fastened to prevent movement during measurement.
3. Zeroing the Indicator:
   • Position the contact point against a known reference surface or the part to be measured at its starting point.
   • Rotate the outer bezel until the main pointer aligns with the '0' mark on the dial.
   • Ensure the small revolution counter is also at a suitable starting position, typically '0' if the measurement starts from a true zero point.

5. Instruccions de funcionament

To take a measurement with the YATO YT-72450 Measuring Clock:

1. Preparar la peça de treball: Ensure the surface of the workpiece to be measured is clean and stable.
2. Position the Indicator: Mount the measuring clock on a stable stand. Bring the contact point into gentle contact with the surface of the workpiece.
3. Set Zero: With the contact point at the desired reference position, rotate the bezel to align the main pointer with the '0' mark.
4. Prendre la mesura: Move the workpiece or the indicator stand to measure the desired dimension or variation. The main pointer will indicate the change in position in hundredths of a millimeter (0.01mm).
5. Read the Dial:
   • The large pointer on the main dial indicates fractions of a millimeter, with each major division representing 0.1mm and each small division representing 0.01mm.
   • The small pointer on the revolution counter indicates full millimeters. Each full rotation of the large pointer corresponds to 1mm, and the small pointer moves one division.
   • The total measurement is the sum of the full millimeters shown on the small counter and the fractional millimeters shown on the main dial.
6. Interval màxim: The device has a total measuring range of 10mm. Do not exceed this range to prevent damage.

6. Manteniment

• Neteja: After each use, wipe the measuring clock with a soft, clean, lint-free cloth. For stubborn dirt, a cloth lightly dampened with isopropyl alcohol can be used, ensuring no liquid enters the internal mechanism.
• Lubricació: The internal mechanisms are factory-lubricated and generally do not require user lubrication. Unauthorized lubrication can attract dust and impair performance.
• Emmagatzematge: Store the measuring clock in its original protective case or a dedicated storage box in a dry, dust-free environment. Avoid areas with high humidity or temperature fluctuations.
• Calibració: For critical applications, periodic calibration by a qualified technician is recommended to ensure continued accuracy.

7. Solució De Problemes

• Pointer does not move smoothly: Check for any visible obstructions or dirt on the stem or contact point. Ensure the device is clean. If the issue persists, professional service may be required.
• Lectures inexactes: Verify that the indicator is securely mounted and that the workpiece is stable. Ensure the zero point was set correctly. Check for any play in the mounting or the indicator's stem.
• Bezel is stiff: Clean around the bezel to remove any accumulated dust or debris. Do not force the bezel.

If you encounter problems that cannot be resolved with these steps, please contact YATO customer support or a qualified service center.

8. Especificacions

9. Garantia i Suport

Specific warranty information for the YATO YT-72450 Measuring Clock is not provided within this manual. For details regarding warranty coverage, terms, and conditions, please refer to the documentation included with your purchase or contact YATO customer service directly.

For technical support, spare parts, or service inquiries, please contact your authorized YATO dealer or visit the official YATO weblloc per obtenir informació de contacte.