1. Introducció
The VARTA Aluminium Light F30 Pro is a high-performance LED torch designed for durability and versatility. Featuring a robust aluminium housing, three light modes, and adjustable focus, it is suitable for a wide range of applications including outdoor activities, emergency situations, and general household use. This manual provides detailed instructions for the proper setup, operation, and maintenance of your torch to ensure optimal performance and longevity.
2. Instruccions de seguretat
Please read and understand all safety instructions before using the VARTA Aluminium Light F30 Pro. Failure to follow these instructions may result in injury or damage to the product.
- Seguretat ocular: Do not look directly into the LED light or shine it directly into the eyes of others. The intense light can cause temporary vision impairment or permanent eye damage.
- Seguretat de la bateria:
- Use only the specified battery type (3x AAA Alkaline batteries).
- Do not mix old and new batteries, or batteries of different types or brands.
- Assegureu-vos que les piles estiguin inserides amb la polaritat correcta (+/-).
- Traieu les piles si no heu d'utilitzar la llanterna durant un període prolongat per evitar fuites.
- Eliminar les bateries usades de manera responsable d'acord amb la normativa local.
- No intenteu recarregar bateries no recarregables.
- Manipulació del producte:
- Keep the torch away from extreme temperatures, direct sunlight, and moisture. This product is no resistent a l'aigua.
- Do not disassemble or modify the torch. This will void the warranty and may cause damage.
- Mantenir fora de l'abast dels nens.
3. Producte acabatview
The VARTA Aluminium Light F30 Pro is designed for ease of use and durability. Below is an illustration of the torch and its main components.
Figure 1: VARTA Aluminium Light F30 Pro LED Torch. This image displays the black aluminum body of the torch, featuring a textured grip section, a sturdy pocket clip, and the adjustable lens at the front. The VARTA logo is visible on the side.
Components clau:
- Head/Lens Assembly: Contains the LED and the adjustable focus mechanism.
- Cos: The main housing, made of anodised aluminium, providing durability and grip.
- Clip de butxaca: For secure attachment to clothing or gear.
- Tail Cap: Houses the power button and provides access to the battery compartment.
4. Configuració
4.1 Instal·lació de la bateria
The VARTA Aluminium Light F30 Pro requires three (3) AAA alkaline batteries for operation. Batteries are included with your purchase.
- Desenrosqueu la tapa posterior de la torxa girant-la en sentit antihorari.
- Insert three (3) AAA batteries into the battery compartment, ensuring the correct polarity (+ and - ends) as indicated inside the compartment.
- Screw the tail cap back on clockwise until it is securely tightened. Do not overtighten.
Note: Ensure the battery contacts are clean and free from debris for optimal performance.
5. Instruccions de funcionament
5.1 Modes d'encesa/apagada i de llum
The torch features a protected on/off button located on the tail cap. It offers three distinct light modes.
- Encendre: Press the tail cap button firmly until it clicks. The torch will activate in the High light mode.
- To Cycle Through Modes: Once the torch is on, lightly press the tail cap button (without clicking it off) to cycle through the modes:
- High (400 Lumens)
- Low (Reduced brightness for extended runtime)
- Strobe (Flashing light for signaling or emergencies)
- Apagar: From any mode, press the tail cap button firmly until it clicks again.
5.2 Adjusting Focus (Spot-to-Flood)
The VARTA Aluminium Light F30 Pro allows you to adjust the beam from a narrow spot to a wide flood.
- Per ajustar: Gently twist the head of the torch clockwise or counter-clockwise.
- Twisting in one direction will narrow the beam to a focused focus, ideal for long-distance illumination.
- Twisting in the other direction will widen the beam to a broad reflector, suitable for illuminating a larger area up close.
6. Manteniment
6.1 Neteja
- Wipe the exterior of the torch with a soft, damp tela. No utilitzeu netejadors abrasius ni dissolvents.
- Keep the lens clean for optimal light output. Use a soft, lint-free cloth to gently wipe the lens.
6.2 Substitució de la bateria
When the light output diminishes, it is time to replace the batteries. Follow the steps in Section 4.1 "Battery Installation" to replace the three (3) AAA alkaline batteries.
6.3 Emmagatzematge
If storing the torch for an extended period (more than one month), remove the batteries to prevent potential leakage and damage to the device. Store in a cool, dry place.
7. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| La torxa no s'encén. |
|
|
| La llum és tènue o parpelleja. |
|
|
| No es pot ajustar l'enfocament. |
|
|
8. Especificacions
- Model: VARTA Aluminium Light F30 Pro
- Número de peça: 17608101421
- Font de llum: LED
- Brillantor: Fins a 400 lúmens
- Beam Range: Fins a 150 metres
- Temps d'execució: Up to 50 Hours (on Low mode)
- Font d'alimentació: 3 piles alcalines AAA (incloses)
- Material: Alumini anoditzat
- Característiques especials: 3 Light Modes (High, Low, Strobe), Spot-to-Flood Focus, Shockproof
- Resistència a l'aigua: No resistent a l'aigua
- Pes de l'article: Approximately 160 Grams (5.6 ounces)
9. Garantia i Suport
VARTA products are manufactured to high-quality standards and are backed by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official VARTA weblloc.
If you encounter any issues or require technical assistance, please contact VARTA customer support through their official website or the contact information provided in your product packaging. When contacting support, please have your product model (F30 Pro) and part number (17608101421) available.
