HYPER GO H16BM 1/16 Scale RC Truck Instruction Manual

1. Introducció

Welcome to the world of high-speed RC action with your new HYPER GO H16BM 1/16 Scale RC Truck. This manual provides essential information for the proper setup, operation, maintenance, and troubleshooting of your vehicle. Please read it thoroughly before first use to ensure optimal performance and longevity.

Figure 1: HYPER GO H16BM RC Truck with remote, batteries, and extra shell.

2. Pautes de seguretat

Your HYPER GO H16BM is a powerful remote control vehicle. Adhering to these safety guidelines is crucial for preventing injury and damage.

• Restricció d'edat: Not for children under 14 years old. Adult supervision is recommended for all users.
• Entorn de funcionament: Operate the RC truck in open, clear areas away from people, pets, vehicles, and obstacles. Avoid public roads.
• Exposició a l'aigua: While the receiver and ESC are splash-proof, avoid submerging the vehicle in water or operating in heavy rain to prevent damage to electronic components.
• Seguretat de la bateria:
  • Use only the provided or recommended LiPo batteries and charger.
  • No sobrecarregueu ni descarregueu excessivament les bateries.
  • Store batteries in a cool, dry place, away from flammable materials. The battery casing is made with flame-retardant materials for enhanced safety.
  • Inspect batteries for damage before each use. Discontinue use if damaged.
• Control de l'accelerador: Do not steer at full speed until you have mastered the driving skills. Utilize the 70% throttle limited switch for beginners.
• Calor: The motor and ESC can become hot during operation. Avoid touching them immediately after use.

Figure 2: The battery casing is designed with flame-retardant materials for safety.

3. Contingut del paquet

Verifiqueu que tots els elements siguin presents al vostre paquet:

• 1 x HYPER GO H16BM RC Truck
• 1 x 2.4GHz 3-Channel Transmitter (Remote Control)
• 2 x 7.4V 1050 mAh 25C LiPo Rechargeable Batteries
• 1 x cable de càrrega USB
• 1 x clau anglesa hexagonal
• 1 x tornavís
• 2 x Extra Metal Axles
• 1 x Extra Body Shell (Blue/Yellow design)
• 1 x Head-up Wheel Kit
• 1 x Manual del producte (aquest document)

Figura 3: Representació visual del contingut del paquet.

4. Especificacions tècniques

5. Configuració inicial

5.1 Càrrega de la bateria

Before first use, fully charge the included LiPo batteries. Connect the battery to the USB charging cable and plug the cable into a compatible USB power source (e.g., computer USB port, USB wall adapter). The indicator light on the charger will show charging status (refer to charger instructions for specific light patterns).

5.2 Instal·lació de la bateria

Carefully open the battery compartment on the underside of the RC truck. Insert a fully charged LiPo battery, ensuring the connectors align correctly. Securely close the battery compartment.

5.3 Configuració del transmissor

Install 4x AA batteries (not included) into the transmitter. Ensure correct polarity. The transmitter features a 2.4GHz 3-Channel Radio for reliable control.

Figure 4: The 2.4GHz 3-Channel Radio Transmitter with labeled controls.

5.4 Vinculació del transmissor i del receptor

The truck and transmitter are typically pre-bound from the factory. If re-binding is necessary:

1. Ensure both the truck and transmitter are powered off.
2. Enceneu l'emissor.
3. Turn on the RC truck. The indicator lights on both devices should show a successful connection (refer to the specific light patterns in the included product manual).
4. If binding fails, repeat the steps or consult the detailed binding procedure in the separate product manual provided in the box.

Figure 5: The splash-proof receiver and 45A ESC, designed for durability.

6. Operating Your RC Truck

6.1 Controls bàsics

• Throttle (CH2:TH): Premeu el gallet per accelerar cap endavant. Premeu el gallet per frenar o marxar enrere.
• Steering (CH1:ST): Turn the steering wheel left or right to control the direction of the truck.
• Trim de la direcció (ST.TRIM): Adjust this dial to ensure the truck drives straight when the steering wheel is centered.
• Throttle Limit Switch: Located on the transmitter, this switch allows you to limit the maximum throttle output to 70% for beginners or 100% for experienced users. This is great for learning control before unleashing full speed.
• CH3 Light Control/Code Matching (Fn button): Use this button for controlling the light bar and for initiating code matching if needed.

Figure 6: Illustrates the difference in speed between 70% and 100% throttle settings.

6.2 Performance Modes (2S vs 3S LiPo)

Your HYPER GO H16BM comes with two 2S 7.4V 1050 mAh LiPo batteries, allowing for speeds of 27+ mph (45 kph). For even more extreme performance, the independent 45A ESC supports a 3S-capable power system. With a compatible 3S 11.1V LiPo battery (sold separately), furious speeds of 42+ mph (68 kph) are achievable in optimum conditions.

Figure 7: The powerful Hobby 2845 4200KV brushless motor and E45A ESC.

Figure 8: Stable and continuous high-rate discharge platform, keeping the truck bursting at amazing speeds.

6.3 Consells de conducció

• Start with the 70% throttle limit to get accustomed to the truck's handling.
• Practiqueu la direcció i el control de l'accelerador en una zona oberta.
• The truck is designed for off-road use and can handle various terrains, jumps, and stunts like popping wheelies and back-flipping.
• The pre-mounted sponge inserted tires and oil-filled absorbers help reduce shaking and maintain stability at high speeds.

Figure 9: The truck's robust design, including oil-filled shocks, allows for impressive jumps and landings.

Figure 10: The truck is capable of handling various terrains and jumps.

7. Manteniment i cura

Regular maintenance will extend the life and performance of your RC truck.

• Neteja: After each use, especially after driving in dirt or dusty conditions, clean the truck with a soft brush or compressed air to remove debris. Avoid using water directly on electronics.
• Cura de la bateria: Always disconnect the battery from the truck when not in use. Store batteries properly as per safety guidelines.
• Inspecting Gears and Drivetrain: Periodically check the metal gears and metal differential for wear or damage. The 5.5MM diameter axle and M4 nuts contribute to the durable 4WD system. The 16 ball bearings reduce power loss and should be kept clean.
• Amortidors: The oil-filled absorbers are designed for durability. Check them for leaks or damage.
• Chassis and Components: The honeycomb chassis and F/R zinc metal reinforced sheets are designed for impact resistance. Inspect for cracks or damage after heavy impacts. The adjustable pull rod should also be checked for proper function.

Figure 11: Components of the ultra-durable metal driving system, including pre-mounted tires, rechargeable LiPo battery, and adjustable pull rod.

Figura 12: Detallada view of the chassis and various drivetrain components for maintenance reference.

Figure 13: The brushless motor features a metal heatsink and cooling fans for optimal performance and longevity.

8. Guia de resolució de problemes

If you encounter issues with your HYPER GO H16BM, refer to the common problems and solutions below. For more detailed troubleshooting, please consult the specific troubleshooting guide included in the product box.

Figure 14: For any questions during use, do not hesitate to contact customer support. A detailed troubleshooting guide is also included in the box.

9. Garantia i atenció al client

For warranty information and customer support, please refer to the documentation included in your product packaging. You can also visit the official HYPER GO store on Amazon for additional resources, FAQs, and contact information.

HYPER GO Store: Visit the HYPER GO Store

Each item has a unique code that HYPER GO verifies before shipping, ensuring product authenticity and quality.