ST-5150 DVB-S2 / C / T2 Combo Satellite TV Finder Meter User Manual

1. Introducció

Welcome to the user manual for your SatLink ST-5150 DVB-S2/C/T2 Combo Satellite TV Finder Meter. This device is designed to assist professionals and enthusiasts in the installation and verification of digital television services, including satellite, terrestrial (antenna), and cable signals. Its compact size, lightweight design, intuitive interface, and extensive features make it an essential tool for accurate signal measurement and setup.

Please read this manual thoroughly before operating the device to ensure proper usage and to maximize its capabilities. Keep this manual for future reference.

2. Producte acabatview

The SatLink ST-5150 is a highly compliant handheld meter supporting DVB-S/S2, DVB-T/T2, and DVB-C standards, along with MPEG-2/4 AVC and H.265 (8 Bit)/HEVC hardware encoding. It features a 4.3-inch High Definition TFT LCD screen for clear display of signal parameters.

• Suport multiestàndard: Fully compliant with DVB-S/S2/T/T2/C for comprehensive signal reception.
• Advanced Decoding: Supports MPEG2, MPEG4, H.264/MPEG4 AVC, and H.265/HEVC hardware encoding.
• Digital Signal Measurement: Provides precise digital readings for signal strength and quality.
• Scanning Capabilities: Features both Auto Scan and Manual Scan options for channel discovery.
• Signal Alarms: Equipped with sound and light alarms to indicate successful signal acquisition.
• Càlcul de l'angle: Automatically calculates the Angle of AZ (Azimuth) and EL (Elevation) for satellite dish alignment.
• DiSEqC Support: Compatible with DiSEqC 1.0/1.1/1.2, Unicable, and 0/22kHz Tone.
• Altaveu integrat: Allows for audio monitoring of channels.
• Connectivitat versàtil: Supports both AV out and AV in, as well as HD-MI out for external display.
• Potència i portabilitat: Powered by a 7.4V/2600mAh Li-Ion Battery, offering long operational hours. Software upgrades are possible via the USB port.

Producte Views

Davant view of the ST-5150 in its red protective casing, showing the main menu interface with various function icons.

Davant view of the ST-5150 in a black casing, displaying the main menu with options for DVB-S2, DVB-T2, DVB-C, and more.

Close-up of the ST-5150 screen showing the "Satellite Find Setup" menu, with options for LNB Type, Frequency, Symbol Rate, and DiSEqC Mode.

posterior view of the ST-5150, displaying the product label with input specifications and the battery compartment cover.

Diagram highlighting the various features and input/output ports of the ST-5150, including USB, AV In/Out, HDMI, and DC power.

3. Configuració

Before using your ST-5150 meter, ensure it is adequately charged and all necessary accessories are available.

3.1 Desembalatge i inspecció inicial

Upon receiving your SatLink ST-5150, carefully open the packaging and inspect all contents for any signs of damage. The package should contain the following items:

• ST-5150 Satellite Finder Meter
• Manual d'usuari
• Adaptador de corrent (carregador)
• Cable AV
• Cable USB
• Adaptador BNC

3.2 Càrrega de la bateria

The ST-5150 comes with a built-in 7.4V/2600mAh Li-Ion battery. For optimal performance and battery life, fully charge the device before its first use.

1. Connect the provided power adapter to the DC 12V input port on the side of the meter.
2. Plug the power adapter into a standard electrical outlet (100-240VAC 50/60Hz).
3. The "Charge" indicator light on the front panel will illuminate, indicating that the device is charging.
4. Once fully charged, the indicator light may change color or turn off (refer to the device's specific charging indicator behavior).

Nota: Avoid overcharging the battery for extended periods. Disconnect the charger once the battery is full.

3.3 Connecting to Signal Source

The ST-5150 supports DVB-S2/S (Satellite), DVB-T/T2 (Terrestrial), and DVB-C (Cable) signals. Use the appropriate F-type connector for your signal source.

• For Satellite (DVB-S/S2): Connect the LNB cable from your satellite dish to the "LNB IN" F-type connector on the meter.
• For Terrestrial (DVB-T/T2) or Cable (DVB-C): Connect the antenna or cable TV signal cable to the "ANT IN" F-type connector.

Ensure all connections are secure to prevent signal loss or interference.

4. Instruccions de funcionament

This section details the basic operation of your ST-5150 meter for signal acquisition and analysis.

4.1 Engegada/apagada

Manteniu premut el botó Poder button located on the front panel to turn the device on or off. The LCD screen will illuminate upon startup.

4.2 Navegació pel menú

Use the directional Fletxa botons (Amunt, Avall, Esquerra, Dreta) per navegar per les opcions del menú. Premeu la tecla OK button to confirm a selection or enter a submenu. The MENÚ button returns to the previous menu or the main menu, and Sortida button exits the current screen.

4.3 Recerca de senyal de satèl·lit (DVB-S/S2)

1. Al menú principal, seleccioneu DVB-S2 opció.
2. Tria Satellite Find Setup.
3. Select the desired satellite from the list or add a new one.
4. Configure parameters such as LNB Type, LNB Frequency, Transponder, Frequency, Symbol Rate, and Polarization.
5. Adjust DiSEqC settings (1.0/1.1/1.2, Unicable) and 0/22kHz Tone as required for your setup.
6. Observe the signal strength and quality bars on the screen. Adjust your satellite dish until optimal signal is achieved. The meter will provide a sound and light alarm when a strong signal is detected.
7. Utilitza el Angle Calc... function to assist in determining the correct Azimuth and Elevation angles for your location.

4.4 Terrestrial/Cable Signal Finding (DVB-T/T2, DVB-C)

1. Al menú principal, seleccioneu DVB-T2 for terrestrial or DVB-C for cable.
2. Enter the appropriate frequency and bandwidth settings for your region or cable provider.
3. Perform an Escaneig automàtic or Escaneig manual to find available channels.
4. Monitor the signal strength and quality indicators. Adjust your antenna or cable connection for best results.

4.5 Media Playback and Other Functions

• Multimèdia: The meter supports playback of various media files (WMA, MP3, MP4, AVI, JPG, BMP, IMG) via the USB port. Connect a USB drive with your media files and navigate to the "Multimedia" section.
• Configuració del sistema: Access "System Set..." to configure language, time, display settings, and other system preferences.
• AV Out/In & HDMI Out: Use the AV cables or an HDMI cable to connect the meter to an external display (TV, monitor) for larger viewing or to input video signals.
• Actualització de programari: The device firmware can be updated via the USB port. Refer to the manufacturer's weblloc web per obtenir el programari i les instruccions més recents.

5. Manteniment

Proper maintenance ensures the longevity and optimal performance of your ST-5150 meter.

• Neteja: Feu servir un drap suau i sec per netejar el dispositiu. Per a la brutícia resistent, netegeu lleugerament.amp cloth can be used, but ensure no moisture enters the ports or openings. Do not use abrasive cleaners or solvents.
• Cura de la bateria:
  • Eviteu esgotar completament la bateria amb freqüència.
  • If storing the device for an extended period, charge the battery to about 50% and store in a cool, dry place. Recharge every few months to prevent deep discharge.
  • Feu servir només l'adaptador de corrent original que s'inclou amb el dispositiu.
• Emmagatzematge: Store the meter in a cool, dry place, away from direct sunlight, extreme temperatures, and high humidity. Keep it in its original packaging or a protective case when not in use to prevent physical damage.
• LNB Short Protect: The device features LNB short protection. If an LNB short circuit is detected, the meter will automatically cut off power to the LNB to prevent damage. Address the short circuit before resuming operation.

6. Solució De Problemes

Si teniu problemes amb el vostre ST-5150, consulteu els següents problemes i solucions habituals:

For issues not listed here, or if the suggested solutions do not resolve the problem, please contact customer support.

7. Especificacions

Detailed technical specifications for the SatLink ST-5150 meter.

8. Garantia i Suport

SatLink products are manufactured to high-quality standards. This product comes with a standard manufacturer's warranty against defects in materials and workmanship. Please refer to the warranty card included in your package or contact your retailer for specific warranty terms and conditions.

For technical support, troubleshooting assistance, or inquiries regarding your ST-5150 meter, please contact the seller or manufacturer directly. Have your product model number (ST-5150) and purchase information ready when seeking support.

Nota: Les reparacions o modificacions no autoritzades poden anul·lar la garantia.