Compressor d'aire ultrasilenciós Stealth de 12 galons i manual d'instruccions del kit d'acoblament i endoll ColorFit de Milton

1. Introducció

This manual provides comprehensive instructions for the safe and efficient operation, maintenance, and troubleshooting of your Stealth 12 Gallon Ultra Quiet Air Compressor (Model SAQ-11215) and the ColorFit by Milton Coupler & Plug Kit (Model S-314MKIT). Please read this manual thoroughly before initial use to ensure proper function and to prevent injury or damage.

2. Informació de seguretat

Always observe basic safety precautions when using electrical appliances and air tools to reduce the risk of fire, electric shock, and personal injury.

Normes generals de seguretat:

• Read all instructions before operating the compressor.
• Utilitzeu l'equip de protecció individual (EPI) adequat, incloent-hi ulleres de seguretat, protecció auditiva i guants.
• Assegureu-vos que la zona de treball estigui neta, ben il·luminada i lliure d'obstacles.
• No feu funcionar el compressor en damp or wet locations, or in the presence of flammable liquids or gases.
• Mantingueu els nens i els espectadors lluny del compressor en funcionament.
• Desconnecteu sempre l'alimentació abans de fer qualsevol manteniment o ajustament.
• Do not exceed the maximum operating pressure of any air tool or accessory.
• Regularly inspect the air tank for rust or damage. Do not use a damaged tank.
• Drain condensation from the air tank daily to prevent corrosion.

Seguretat elèctrica:

• Assegureu-vos que la font d'alimentació voltage matches the compressor's requirements (12 Volts).
• Use only grounded outlets.
• Do not use extension cords unless absolutely necessary, and ensure they are properly rated for the compressor's power requirements.
• Never carry the compressor by its power cord.

3. Producte acabatview

3.1 Stealth 12 Gallon Ultra Quiet Air Compressor

The Stealth SAQ-11215 is a 12-gallon, 1.5 HP oil-free air compressor designed for quiet operation and long life. It features a maximum pressure of 150 PSI and is equipped with wheels and a handle for portability.

Figura 3.1: Frontal view of the Stealth 12 Gallon Ultra Quiet Air Compressor. This image shows the main unit with its control panel, tank, wheels, and handle.

Components clau:

• Tanc d'aire: 12-gallon capacity, stores compressed air.
• Conjunt motor/bomba: 1.5 HP oil-free motor for quiet and maintenance-free operation.
• Manòmetres: Displays tank pressure and regulated output pressure.
• Pom regulador: Ajusta la pressió de l'aire de sortida.
• Quick Couplers: Two outlets for connecting air tools.
• Vàlvula de desguàs: Located at the bottom of the tank for draining condensation.
• Rodes i mànec: Per facilitar el transport.

Figure 3.2: Dimensions of the Stealth 12 Gallon Air Compressor. This image provides a visual representation of the compressor's height, width, and depth, along with key specifications like tank size, horsepower, and noise level.

3.2 ColorFit by Milton Coupler & Plug Kit (M-Style, Red)

The Milton S-314MKIT is a 14-piece M-Style coupler and plug kit designed for easy identification and connection of air tools. The red color coding helps distinguish air lines.

Figure 3.3: The complete ColorFit by Milton Coupler & Plug Kit. This image displays all 14 pieces of the kit, including male and female plugs and couplers, all in a distinctive red finish.

Contingut del kit:

• 6 Male Plugs (1/4" NPT)
• 4 Female Plugs (1/4" NPT)
• 2 Male Couplers (1/4" NPT)
• 2 Female Couplers (1/4" NPT)

All components are M-Style (Industrial) and feature a scratch-resistant anodized red coating. They are compatible with traditional Milton M-style and competitor M-style couplers and plugs.

4. Configuració

4.1 Air Compressor Setup:

1. Desembalatge: Traieu amb cura el compressor del seu embalatge. Inspeccioneu-lo per si hi ha hagut danys durant l'enviament.
2. Instal·lació del silenciador: Attach the included air filter/muffler assemblies to the intake ports on the pump head.
3. Col·locació: Position the compressor on a firm, level surface in a well-ventilated area. Ensure adequate clearance around the unit for air circulation.
4. Vàlvula de desguàs: Ensure the drain valve at the bottom of the tank is closed before operation.
5. Connexió d'alimentació: Connecteu el cable d'alimentació a una presa de corrent de 12 volts amb connexió a terra.

4.2 Coupler & Plug Kit Setup:

1. Identificar els components: Familiarize yourself with the male plugs, female plugs, male couplers, and female couplers.
2. Thread Sealant: Apply thread sealant tape (not included) to the male threads of all plugs and couplers before installation to ensure an airtight seal.
3. Attach Plugs to Tools: Thread the appropriate male or female plug onto the air inlet of your pneumatic tools. Tighten securely.
4. Attach Couplers to Hoses: Thread the appropriate male or female coupler onto the ends of your air hoses. Tighten securely.
5. Codificació de colors: Utilize the red color to designate specific air lines (e.g., for lubricated vs. non-lubricated air, or high vs. low pressure) to prevent cross-contamination.

5. Instruccions de funcionament

5.1 Initial Break-in Procedure (Compressor Only):

Before first use, perform a 20-minute break-in to ensure optimal performance and longevity.

1. With the power cord plugged in, turn the compressor's power switch to the "ON" position.
2. Open the tank drain valve completely (located at the bottom of the tank). This will prevent pressure from building up.
3. Allow the compressor to run for 20 minutes with the drain valve open. This helps seat the piston rings.
4. After 20 minutes, turn the power switch to "OFF" and close the drain valve.

5.2 Standard Operation:

1. Encès: Ensure the drain valve is closed. Turn the power switch to "ON". The compressor will begin to fill the tank.
2. Acumulació de pressió: The compressor will run until the tank pressure reaches its maximum (150 PSI), then it will shut off automatically.
3. Adjust Output Pressure: Turn the regulator knob clockwise to increase output pressure and counter-clockwise to decrease it. Monitor the "TOOL" gauge for the desired pressure.
4. Connecteu l'eina d'aire: Pull back the collar on the quick coupler, insert the air tool's plug, and release the collar to secure the connection.
5. Utilitza l'eina: Operate your pneumatic tool as per its own instruction manual. The compressor will cycle on and off automatically to maintain tank pressure as air is consumed.
6. Disconnect Tool: Before disconnecting, ensure the air tool is not under pressure. Pull back the quick coupler collar to release the plug.
7. Apagar: When finished, turn the power switch to "OFF".
8. Dipòsit de drenatge: Slowly open the drain valve to release all air pressure from the tank. Once pressure is at zero, leave the valve open to drain any accumulated moisture. Close the valve before next use.

Figure 5.1: Common applications for the Stealth Air Compressor. This image illustrates various pneumatic tools and tasks the compressor can support, including inflating, cleaning, caulk gun, roofing nailer, drill, paint sprayer, stapler pinner, brad/finishing nailer, wrench, chisel, and spray gun.

6. Manteniment

Regular maintenance ensures the longevity and safe operation of your air compressor.

Manteniment diari:

• Dipòsit de drenatge: Always drain condensation from the air tank after each use. This prevents rust and extends tank life.
• Inspeccionar si hi ha fuites: Check all connections and hoses for air leaks. A soapy water solution can be used to detect leaks.

Manteniment setmanal/mensual:

• Filtre d'aire net: The compressor is oil-free, but the air filter should be inspected and cleaned or replaced if dirty to ensure proper airflow to the pump.
• Inspeccioneu el cable d'alimentació: Check the power cord for any signs of damage, fraying, or exposed wires.
• Comprovació dels elements de fixació: Assegureu-vos que totes les femelles, els cargols i les rosques estiguin ben ajustades.

Coupler & Plug Kit Maintenance:

• Neteja: Keep couplers and plugs free from dirt and debris.
• Lubricate (Optional): A small amount of pneumatic tool oil can be applied to the moving parts of couplers to ensure smooth operation, but avoid over-lubrication, especially if using with non-lubricated air tools.
• Inspeccionar el desgast: Replace any worn or damaged couplers or plugs to maintain an airtight seal and prevent air leaks.

7. Solució De Problemes

Aquesta secció tracta els problemes habituals que podeu trobar amb el vostre compressor d'aire.

8. Especificacions

9. Garantia i Suport

For warranty information, technical support, or to order replacement parts, please contact Stealth customer service. Refer to the product packaging or the manufacturer's official weblloc web per obtenir les dades de contacte més actualitzades.

When contacting support, please have your product model number (SAQ-11215 for the compressor, S-314MKIT for the coupler kit) and date of purchase readily available.