MOUNTUP Ultrawide Single Monitor Arm & Triple Monitor Desk Mount Bundle Instruction Manual

Introducció

This manual provides instructions for the installation, operation, and maintenance of your MOUNTUP Ultrawide Single Monitor Arm (Model MU7007) and Triple Monitor Desk Mount (Model MU0006A) bundle. Please read these instructions carefully before installation to ensure correct setup and safe operation.

Contingut del paquet

The MOUNTUP Ultrawide Single Monitor Arm & Triple Monitor Desk Mount Bundle includes the following components:

• 1 x MOUNTUP Ultrawide Single Monitor Stand (MU7007)
• 1 x MOUNTUP Triple Monitor Arm (MU0006A)
• All necessary hardware for mounting
• Manual d'instruccions

Informació de seguretat

Ensure all components are present and undamaged before installation. Do not exceed the maximum weight capacity specified for each arm. Improper installation may result in property damage or personal injury. If you have any questions, contact customer support.

Configuració i instal·lació

The monitor mounts offer two primary installation methods: C-clamp mounting and Grommet mounting. Choose the method suitable for your desk.

1. Trieu l'opció de muntatge

This image illustrates the two available mounting options: C-clamp for desk edges and grommet for desks with a pre-drilled hole. The C-clamp supports desk thicknesses from 0.39" to 1.97". The grommet mount supports desk thicknesses from 0.39" to 1.97" and hole diameters from 0.39" to 3.15".

C-Clamp Muntatge:

1. Enganxeu el C-clamp de la base a la vora de l'escriptori.
2. Apretar el clamp de manera segura per garantir l'estabilitat.

Muntatge d'oelles:

1. Insert the grommet base through the pre-drilled hole in your desk.
2. Secure the base from underneath the desk using the provided hardware.

2. Attach Monitor Arms

Once the base is secure, attach the monitor arms to the central pole or base as per the specific instructions for the MU7007 and MU0006A models.

3. Attach Monitors

Attach your VESA-compatible monitors to the mounting plates on the arms. Ensure the VESA screws are tightened firmly.

4. Gestió de cables

Utilize the integrated cable management channels within the arms to route and conceal monitor cables, maintaining a tidy workspace.

This image demonstrates how to install the detachable USB connector into the base of the monitor arm. The USB cable is not included with the product.

Instruccions de funcionament

The MOUNTUP monitor arms provide full motion capabilities for optimal viewcomoditat.

Adjusting Monitor Position (Single Arm MU7007)

This image displays the articulation capabilities of the single monitor arm. It can tilt from +90° to -45°, swivel 180° at two points, and rotate 360° for landscape or portrait orientation.

• Inclinació: Ajusteu la pantalla del monitor verticalment de +90° a -45° per reduir l'enlluernament i optimitzar viewangle de ing.
• Girar: Pivot the monitor horizontally up to 180° at the arm joints to share your screen or adjust your viewposició d'ingrés.
• Rotació: Gireu el monitor 360° per canviar entre les orientacions horitzontal i vertical.

Adjusting Monitor Position (Triple Arm MU0006A)

This image demonstrates the full range of motion for the triple monitor arm. Each monitor can tilt ±90°, swivel 180°, and rotate 360°. The arms also allow for 360° swivel at the base and 270° swivel at the mid-joint for flexible screen arrangements.

• Inclinació: Each monitor can be tilted ±90° for individual screen angle adjustment.
• Girar: Each monitor can swivel 180°. The arm joints also allow for 360° and 270° swivel for extensive positioning.
• Rotació: Each monitor can rotate 360° for landscape or portrait viewing.

Height Adjustment and Gas Spring Tension

This image illustrates the counterbalance height adjustment feature, showing a maximum height of 19.7 inches and a minimum height of 6.7 inches. The upgraded gas spring provides smoother adjustments.

The monitor arms feature an integrated gas spring for smooth and effortless height adjustments. To adjust the tension, use the provided Allen key to turn the adjustment screw located on the arm. Turn clockwise to increase tension for heavier monitors, and counter-clockwise to decrease tension for lighter monitors. Adjust until the monitor stays at the desired height without drifting.

Multiple Screen Setups

This image displays several possible configurations for multiple monitors using the triple monitor arm, demonstrating flexibility for different workspace needs, including horizontal alignment, stacked arrangements, and mixed portrait/landscape orientations.

The triple monitor arm allows for various screen setups to optimize your workflow. Experiment with different orientations and positions to find the most ergonomic and productive arrangement for your needs.

Manteniment

To ensure the longevity and proper function of your MOUNTUP monitor arms, follow these maintenance guidelines:

• Neteja: Netegeu les superfícies amb un suau, damp drap. Eviteu productes de neteja abrasius o dissolvents que puguin danyar l'acabat.
• Inspecció: Reviseu periòdicament tots els cargols i connexions per assegurar-vos que romanen ajustats. Torneu a apretar-los si cal.
• Molla de gas: If the gas spring tension feels off, re-adjust it according to the operating instructions.

Resolució de problemes

If you encounter issues with your monitor arms, refer to the following common solutions:

• Monitor Sags or Drifts: The gas spring tension may be too low for the monitor's weight. Increase the gas spring tension by turning the adjustment screw clockwise.
• Difficulty Moving Monitor: The gas spring tension may be too high. Decrease the gas spring tension by turning the adjustment screw counter-clockwise.
• Arm is Loose: Check all mounting screws at the base and arm joints. Tighten any loose connections.
• Monitor no anivellat: Adjust the tilt mechanism on the VESA plate to level the monitor.

If problems persist, contact MOUNTUP customer support for assistance.

Especificacions

Below are the general specifications for the MOUNTUP monitor arm bundle. Specific details may vary slightly between the single (MU7007) and triple (MU0006A) arms.

This image highlights the enhanced capabilities of the upgraded ultrawide mount (MU7007), showing a maximum height of 19.7 inches, maximum extension of 22.6 inches, fit for screens up to 35 inches, and a weight capacity of up to 26.5 lbs.

This image provides compatibility and dimension details for the triple monitor arm (MU0006A). It supports monitors weighing 4.4-19.8 lbs (2-9 kg) each, fits screen sizes up to 27 inches, and is compatible with VESA patterns 75x75mm and 100x100mm. The maximum extension is 58.9 inches with 11.4 inches of height adjustment.

Informació de la garantia

MOUNTUP products are tested for durability and backed by a 3-year support period. This warranty covers defects in materials and workmanship under normal use. For warranty claims or further details, please contact MOUNTUP customer support.

Atenció al client

For any pre-purchase questions, installation assistance, troubleshooting, or warranty inquiries, please contact MOUNTUP customer support. Refer to the MOUNTUP official weblloc web o la documentació de la compra per obtenir les dades de contacte.