1. Introducció
Thank you for choosing the Onforu 65W LED Motion Sensor Outdoor Flood Light. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read these instructions thoroughly before installation and retain them for future reference.
Image 1.1: Two Onforu 65W LED Motion Sensor Outdoor Flood Lights.
2. Informació important de seguretat
ADVERTIMENT: Risk of electric shock. Installation must be performed by a qualified electrician in accordance with all local electrical codes and ordinances. Always turn off power at the circuit breaker before installation or servicing.
- No connecteu a un interruptor regulador d'intensitat.
- Ensure the power supply is 120V AC, 60Hz.
- No intenteu desmuntar ni modificar l'aparell.
- Mantingueu els materials inflamables allunyats de la làmpada.
- Suitable for wet locations. Ensure all connections are properly sealed.
3. Contingut del paquet
Verifiqueu que tots els components siguin presents i no estiguin danyats abans de continuar amb la instal·lació.
- Onforu 65W LED Motion Sensor Outdoor Flood Light (2 units)
- Suport de muntatge
- Junta de goma
- Filferro
- Cargols de muntatge
- Manual d'instruccions
4. Característiques del producte
- Alta brillantor i eficiència energètica: 6500 Lumens output from 65W LED, equivalent to 450W traditional bulbs.
- Disseny ajustable: Three adjustable heads provide a 270-degree detection zone for wide coverage.
- Enhanced Motion Sensor: 180-degree sensing angle, detecting motion up to 72 feet away. Adjustable lighting time from 10 seconds to 7 minutes.
- Durador i resistent a la intempèrie: IP65 waterproof and dust-proof rating, made of die-cast aluminum for excellent heat dissipation and long lifespan.
- Temperatura de color: 6500K Daylight White for clear, bright illumination.
Image 4.1: Key features of the Onforu LED Motion Sensor Outdoor Flood Light.
Image 4.2: Aluminum construction for efficient heat dissipation.
5. Guia d'instal·lació
Abans de començar: Ensure power is OFF at the circuit breaker. Recommended installation height is 8.2-16.4 feet (2.5-5 meters).
5.1 Opcions de muntatge
The fixture can be mounted on a wall or soffit.
Image 5.1: Soffit Mounted vs. Wall Mounted installation examples.
5.2 Instruccions de cablejat
- Desconnecteu l'alimentació a l'interruptor principal.
- Connecteu el suport de muntatge a la caixa de connexió amb els cargols proporcionats.
- Connecteu els cables:
- Black (L): Connect to the live wire from the power supply.
- White (N): Connect to the neutral wire from the power supply.
- Green (GND): Connect to the ground wire from the power supply.
- Ensure the rubber gasket is properly seated between the fixture and the mounting surface to maintain IP65 rating.
- Fixeu el llum al suport de muntatge.
- Adjust the light heads to the desired angles.
- Resta l'alimentació al disjuntor.
Image 5.2: Wiring diagram and product dimensions.
Imatge 5.3: Guia visual dels passos d'instal·lació.
6. Instruccions de funcionament
The motion sensor has three adjustable knobs for customization:
- SENS (sensibilitat): Adjusts the detection distance. Turn towards '-' for lower sensitivity (up to 10m) or '+' for higher sensitivity (up to 22m/72ft).
- LUX (Ambient Light): Determines when the sensor activates. Turn towards the moon icon for activation only at night (less than 10 LUX). Turn towards the sun icon for activation during both day and night.
- TEMPS (Retard de temps): Sets how long the light stays on after motion is detected. Adjustable from 10 seconds to 7 minutes. Turn towards '-' for shorter duration or '+' for longer duration.
Image 6.1: Motion sensor adjustment knobs for LUX, SENS, and TIME.
7. Manteniment
- Clean the fixture regularly with a soft, damp tela. No utilitzeu netejadors abrasius ni dissolvents.
- Periodically check electrical connections for tightness and signs of wear.
- Ensure the motion sensor lens is clear of dirt, dust, or obstructions for optimal performance.
8. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| La llum no s’encén. | No power; incorrect wiring; LUX setting too low. | Check circuit breaker; verify wiring connections; adjust LUX setting towards 'sun' icon. |
| La llum es manté encesa contínuament. | Continuous motion detected; TIME setting too long; wiring issue. | Ensure no constant motion in detection area; adjust TIME setting to shorter duration; check wiring (live and neutral might be reversed). |
| El sensor de moviment no detecta. | SENS setting too low; obstructions; incorrect mounting height. | Adjust SENS setting towards '+'; clear obstructions from sensor view; verify mounting height is within recommended range. |
| La llum parpelleja. | Loose wiring connection; unstable power supply. | Check and tighten all wiring connections; consult an electrician for power supply issues. |
9. Especificacions
| Característica | Especificació |
|---|---|
| Marca | Onforu |
| Número de model | BDB55G-3 |
| Wattage | 65 watts |
| Brillantor | 6500 lúmens |
| Temperatura de color | 6500 Kelvin (blanc llum del dia) |
| Angle del sensor de moviment | 180° |
| Distància de detecció de moviment | Fins a 72 peus |
| Ajust de retard de temps | De 10 segons a 7 minuts |
| Nivell de resistència a l'aigua | Impermeable IP65 |
| Material | Metal (Die-cast Aluminum) |
| Voltage | 120 Volts |
| Dimensions del producte | 10.7 cm de llargada x 5.8 cm d'amplada x 4.7 cm d'alçada |
| Nombre de fonts de llum | 3 (Adjustable Heads) |
| Tipus d'instal·lació | Muntatge de paret |
10. Garantia i assistència
This Onforu product comes with a Limited Warranty. For specific details regarding the warranty period and coverage, please refer to the warranty information provided with your purchase or contact Onforu customer support.
For technical support, troubleshooting assistance, or any inquiries, please contact Onforu customer service through the retailer's platform or visit the official Onforu weblloc.
