Producte acabatview
The ID-COOLING SE-207-XT Slim is a high-performance dual-tower CPU air cooler designed for efficient heat dissipation. It features 7 heat pipes and a 120mm PWM fan, ensuring optimal cooling for your CPU while maintaining a compact 135mm height for broad case compatibility.
Figura 1: The ID-COOLING SE-207-XT Slim CPU Cooler, showcasing its dual-tower design and all-black aesthetic.
Les característiques clau inclouen:
- Dual Tower Design: Maximizes surface area for heat exchange.
- 7 Heat Pipes: Efficiently transfers heat away from the CPU.
- 120mm PWM Fan: Provides high airflow (76.16 CFM) with adjustable speed for optimal performance and low noise (max 35 dB).
- Alçada compacta: At 135mm, it fits most tower cases.
- Àmplia compatibilitat: Supports Intel LGA1700/1200/1150/1151/1155/1156 and AMD AM5/AM4 sockets.
Contingut del paquet
Verify that all components listed below are included in your package before proceeding with installation.
Figura 2: All components included with the SE-207-XT Slim CPU Cooler, including mounting hardware, thermal paste, and fan clips.
- SE-207-XT Slim Heatsink (Dual Tower)
- Ventilador de refrigeració PWM de 120 mm
- Mounting Hardware Kit (for Intel and AMD sockets)
- Pasta tèrmica
- Fan Clips (2 extra included for optional second fan)
- Tornavís
Configuració i instal·lació
Before beginning installation, ensure your system is powered off and unplugged. Refer to your motherboard manual for specific CPU socket and backplate information.
1. Prepareu la placa base
Identify your CPU socket type (Intel LGA or AMD AM) and select the corresponding mounting brackets from the kit. Install the appropriate backplate behind the motherboard if required by your socket type.
2. Aplicar pasta tèrmica
Clean the surface of your CPU and the cooler's base. Apply a small amount of thermal paste (included) to the center of the CPU's integrated heat spreader (IHS). A pea-sized dot is usually sufficient. Do not spread the paste; the pressure from the cooler will distribute it evenly.
Figura 3: The cooler's base featuring Direct Contact Technology, designed for efficient heat transfer from the CPU.
3. Mount the Heatsink
Carefully place the heatsink onto the CPU, aligning the mounting holes with the standoffs or backplate screws. Secure the heatsink using the provided screws, tightening them in a diagonal pattern to ensure even pressure. Use the included screwdriver for this step.
4. Install the Fan
Attach the 120mm PWM fan to the heatsink using the provided fan clips. Ensure the fan is oriented correctly to push air through the heatsink fins towards the rear of your PC case for optimal airflow.
Figura 4: Illustration of how to attach the fan to the heatsink using the fan clips, ensuring proper airflow direction.
Connect the fan's 4-pin PWM cable to the CPU_FAN header on your motherboard. If installing an optional second fan, connect it to another available fan header (e.g., SYS_FAN) or use a fan splitter (not included).
Figura 5: Un detallat view of the 120mm PWM fan, highlighting its design for efficient airflow and quiet operation.
Figura 6: The SE-207-XT Slim CPU Cooler installed within a PC case, viewed from above, demonstrating its fit and clearance.
Figura 7: The SE-207-XT Slim CPU Cooler installed in a PC case, viewed from the side, showing its compact height and RAM compatibility.
Instruccions de funcionament
Once installed, the ID-COOLING SE-207-XT Slim CPU Cooler operates automatically, regulated by your motherboard's fan control settings. The PWM (Pulse Width Modulation) function allows the fan speed to adjust based on CPU temperature, providing efficient cooling when needed and quieter operation during lighter loads.
Fan Control Settings
You can typically adjust fan control settings through your motherboard's BIOS/UEFI or dedicated software provided by your motherboard manufacturer. Common settings include:
- Standard/Silent Mode: Prioritizes quiet operation, suitable for general use.
- Mode de rendiment: Increases fan speed at lower temperatures for maximum cooling, ideal for gaming or heavy workloads.
- Custom Curve: Allows you to define specific fan speeds at different temperature thresholds.
Figura 8: Visual representation of the fan's strong airflow and air pressure capabilities, indicating its performance range.
The fan operates within a speed range of 700-1800 RPM (PWM) and produces a noise level between 15.2-35.2 dB(A).
Manteniment
Regular maintenance ensures optimal performance and longevity of your CPU cooler.
Neteja de la pols
Over time, dust can accumulate on the heatsink fins and fan blades, reducing cooling efficiency. It is recommended to clean the cooler every 3-6 months, or more frequently in dusty environments.
- Apagueu l'ordinador i desendolleu-lo de la presa de corrent.
- Carefully remove the side panel of your PC case.
- Use compressed air to blow dust out of the heatsink fins. Hold the fan blades gently to prevent them from spinning excessively during cleaning, which can damage the fan bearings.
- Wipe down the fan blades and frame with a soft, dry cloth.
- Reassemble your PC.
Reaplicació de pasta tèrmica
While not frequently required, reapplication of thermal paste may be considered every few years or if you notice a significant increase in CPU temperatures. This involves carefully removing the heatsink, cleaning off old thermal paste from both the CPU and cooler base, and applying new thermal paste before re-mounting.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| CPU temperatures are too high. | Insufficient thermal paste, improper heatsink mounting pressure, dust accumulation, incorrect fan orientation, or fan not spinning. | Check thermal paste application and reapply if necessary. Ensure heatsink is securely mounted with even pressure. Clean dust from heatsink and fan. Verify fan is oriented to exhaust air from the heatsink. Check fan cable connection to motherboard. |
| El ventilador no gira. | Fan cable disconnected, faulty fan header on motherboard, or fan failure. | Ensure the 4-pin PWM fan cable is securely connected to the CPU_FAN header. Try connecting the fan to a different fan header on the motherboard. If the fan still does not spin, it may be faulty and require replacement. |
| Excessive fan noise. | Fan speed set too high, dust buildup on fan blades, or faulty fan bearing. | Ajusta la configuració de la velocitat del ventilador a la BIOS/UEFI a un professional més silenciósfile (e.g., Silent Mode). Clean dust from fan blades. If noise persists, the fan bearing may be failing and require replacement. |
| Cooler does not fit in case. | Case height limitation. | The SE-207-XT Slim has a height of 135mm. Verify your PC case's CPU cooler clearance. If it does not fit, a different case or a smaller cooler may be required. |
Especificacions
| Característica | Detall |
|---|---|
| Número de model | SE-207-XT SLIM |
| Dimensions (L x A x A) | 120 x 110 x 135 mm |
| Pes | 1 kg |
| Tubs de calor | 7 |
| Mida del ventilador | 120 mm x 120 mm x 25 mm |
| Velocitat del ventilador | 700-1800 RPM (PWM) |
| Màx. Flux d'aire | 76.16 CFM |
| Nivell de soroll | 15.2-35.2 dB(A) |
| Voltage | 12V DC |
| Connector d'alimentació | PWM de 4 pins |
| TDP | 220W |
| Material | Alumini |
| Tipus de rodament | Coixinet hidràulic |
| Endolls compatibles | Intel LGA1700/1200/115X, AMD AM5/AM4 |
Figura 9: Official specifications table for the SE-207-XT Slim, providing detailed technical data.
Garantia i Suport
ID-COOLING products are designed for reliability and performance. For warranty information and technical support, please refer to the official ID-COOLING weblloc o poseu-vos en contacte amb el seu servei d'atenció al client.
- Oficial Weblloc: www.idcooling.com
- Correu electrònic de suport: support@idcooling.com
- Canal de YouTube: youtube.com/c/idcooling
- Facebook: idcooling.global
Conserveu el vostre comprovant de compra per a reclamacions de garantia.
