Radial Reamp HP Passive Reamping Device User Manual

Introducció

Image: The Radial Reamp HP Passive Reamping Device, a compact black box with white lettering for "Reamp HP Studio Reamper" and "Radial Engineering" logo. It features input and output jacks, a level knob, and switches for mono and ground lift.

The Radial Reamp HP is a flexible, passive reamping device designed to convert a line-level signal from a headphone output into an instrument-level signal suitable for reamping through guitar amplifiers, pedals, or other instrument-level equipment. This device allows engineers and musicians to re-record tracks through different setups without needing to re-perform the original part, offering creative flexibility and time-saving benefits in the studio.

It features inputs for both 1/4-inch and 3.5mm plugs, making it compatible with a wide range of audio interfaces, smartphones, and tablets. The built-in isolation transformer and ground lift switch help eliminate noise and hum, ensuring a clean signal path.

Característiques

Passive Reampdispositiu d'ing: Converts line-level signals to instrument-level without requiring external power.
1/4" and 3.5mm Inputs: Versatile connectivity for audio interfaces, smartphones, and tablets.
Isolation Transformer: Helps eliminate ground loops and noise.
Interruptor d'elevació de terra: Further reduces hum and buzz from ground loop issues.
Interruptor mono: Allows summing stereo headphone outputs to a mono signal for reamping.
Control de nivell: Adjustable output level to fine-tune the signal sent to the amplifier or pedal.

Configuració

Before connecting the Reamp HP, ensure all audio equipment is powered off to prevent potential damage from sudden signal spikes.

Connexió a una interfície d'àudio

Connect the headphone output of your audio interface to the 1/4" INPUT or 3.5mm MINI IN jack on the Reamp HP. Use the appropriate cable (TRS 1/4" or 3.5mm stereo cable).
Connect the OUTPUT of the Reamp HP to the input of your guitar amplifier, effects pedal chain, or instrument-level input on another device using a standard 1/4" TS instrument cable.
If your audio interface's headphone output is stereo and you wish to reamp a mono signal, engage the MONO switch on the Reamp HP. This sums the stereo signal to mono.
Adjust the LEVEL knob on the Reamp HP to control the signal strength sent to your amplifier or pedals. Start with the knob fully counter-clockwise and slowly increase it.
If you experience hum or buzz, try engaging the LIFT switch. This disconnects the ground connection between the Reamp HP and the connected equipment, often resolving ground loop issues.

Radial Reamp HP connected to an audio interface and guitar ampmés viu

Image: The Radial Reamp HP connected to a red audio interface, with a cable running from the Reamp HP's output to a guitar amplifier. This illustrates a typical reampconfiguració.

Diagram showing Radial Reamp HP connection with audio interface, monitors, and ampmés viu

Image: A block diagram illustrating the signal flow for reamping. An audio interface connects to studio monitors and a laptop. The headphone output of the interface connects to the Reamp HP. The Reamp HP's output goes through a pedalboard to a guitar amplifier, which is then miked and returned to the audio interface. This visualizes the complete reamping chain.

Connexió a un telèfon intel·ligent o tauleta

Connect the headphone output of your smartphone or tablet to the 3.5mm MINI IN jack on the Reamp HP using a standard 3.5mm stereo cable.
Connect the OUTPUT of the Reamp HP to the input of your guitar amplifier or effects pedal chain.
Engage the MONO switch if you are reamping a mono signal from a stereo source.
Adjust the LEVEL knob on the Reamp HP and the volume on your smartphone/tablet to achieve the desired signal level.
Use the LIFT switch if ground hum is present.

Diagram showing Radial Reamp HP connection with tablet and ampmés viu

Image: A block diagram showing a tablet connected to the Reamp HP via its headphone output. The Reamp HP's output then feeds a pedalboard and a guitar amplifier, illustrating how mobile devices can be used for reamping.

Operating the Reamp HP

The Radial Reamp HP is designed for straightforward operation. Once connected, its primary function is to convert the signal and provide necessary impedance matching and ground isolation.

Input (1/4" and 3.5mm Mini In): These are the inputs for your line-level source (e.g., headphone output of an audio interface, smartphone, or tablet).
Interruptor mono: When engaged, this switch sums the left and right channels of a stereo input into a single mono signal. This is crucial when reamping a stereo track through a mono amplifier or pedal.
Control de nivell: This control adjusts the output level of the Reamp HP. Use it to fine-tune the signal sent to your amplifier or effects pedals, ensuring optimal gain staging and preventing clipping.
Lift Switch: This is a ground lift switch. If you encounter hum or buzz in your audio signal, engaging this switch can break a ground loop, often resolving the noise.
Sortida: This 1/4" TS output delivers the reamped instrument-level signal to your amplifier, pedalboard, or other instrument-level input.

lateral view of Radial Reamp HP showing Level, Lift, and Output controls

Imatge: Un costat en primer pla view of the Radial Reamp HP, highlighting the Level knob, Lift button, and 1/4" Output jack. This view helps identify the controls on the output side of the device.

lateral view of Radial Reamp HP showing Input, Mono, and Mini In controls

Imatge: Un costat en primer pla view of the Radial Reamp HP, highlighting the 1/4" Input jack, Mono switch, and 3.5mm Mini In jack. This view helps identify the input controls on the device.

Manteniment

The Radial Reamp HP is a passive device designed for durability and requires minimal maintenance. Following these guidelines will help ensure its longevity:

Neteja: Use a soft, dry cloth to wipe down the exterior of the unit. Avoid using abrasive cleaners, solvents, or excessive moisture, as these can damage the finish or internal components.
Emmagatzematge: Guardeu la unitat en un lloc fresc i sec, allunyat de la llum solar directa i de temperatures extremes.
Manipulació: While robust, avoid dropping the unit or subjecting it to severe impacts, which could damage internal circuitry or connectors.
Connexions: Periodically check all cable connections for wear and tear. Ensure cables are securely plugged in but do not overtighten.

Resolució de problemes

Problema	Causa possible	Solució
No sound or very low output.	Connexió de cable incorrecta. El volum del dispositiu font és massa baix. Reamp HP Level knob too low. Cable defectuós.	Ensure all cables are correctly and securely connected. Increase the volume on your audio interface, smartphone, or tablet. Turn the LEVEL knob on the Reamp HP clockwise to increase output. Prova un cable diferent.
Hum or Buzz (Ground Loop).	Ground loop between connected equipment.	Engage the LIFT switch on the Reamp HP. Ensure all equipment is plugged into the same power outlet or power conditioner.
Distorted or clipped sound.	Senyal d'entrada massa calent. Reamp HP Level knob too high. Amplifier/pedal input overloaded.	Reduce the output volume from your source device (audio interface, smartphone). Turn the LEVEL knob on the Reamp HP counter-clockwise to decrease output. Adjust input gain on your amplifier or pedals.
Stereo signal sounds incorrect or phasey when reamped.	Mono switch not engaged for mono reamping.	Engage the MONO switch on the Reamp HP to sum the stereo input to mono.

Especificacions

Característica	Detall
Tipus de dispositiu	Passive Reampdispositiu
Entrades	1 x 1/4" TRS (Input), 1 x 3.5mm TRS (Mini In)
Sortida	1 x 1/4" TS (Output)
Controls	Level, Mono Switch, Ground Lift Switch
Aïllament	Built-in Isolation Transformer
Dimensions	5.15 x 2.95 x 2.3 polzades
Pes	0.011 unces
Número de model	R800 1038

Garantia i Suport

Radial Engineering products are designed and manufactured to the highest standards. For specific warranty information and technical support, please refer to the official Radial Engineering weblloc web o contacteu directament amb el servei d'atenció al client. Conserveu el rebut de compra com a comprovant de compra per a reclamacions de garantia.

For the most up-to-date information, visit: www.radialeng.com

	Radial JDI Passive Direct Box User Guide Comprehensive user guide for the Radial JDI passive direct box, detailing its features, specifications, applications, and troubleshooting. Learn about its Jensen transformer, input/output impedance, and how to achieve optimal audio performance.
	Radial HotShot MD StagGuia de l'usuari del commutador de micròfon electrònic Guia d'usuari per a la Radial HotShot MD, tal comtagSelector de micròfons dissenyat per al redireccionament momentani de micròfons dinàmics a múltiples destinacions, amb un control fàcil per a vocalistes i comunicació amb la banda.
	Guia d'usuari de Radial J48 Active Direct Box Guia d'usuari completa per a la caixa de diàfons activa Radial J48, que detalla les seves característiques, funcions, especificacions i informació de garantia per a aplicacions d'àudio professionals.
	Guia de l'usuari de Radial Headbone VT: Guitarra Amp Canvi de capçal Guia d'usuari completa per al Radial Headbone VT, un dispositiu que permet als guitarristes canviar entre dos vàlvules ampcapçals amplificadors i una caixa d'altaveu única amb control de pedal. Cobreix la configuració, les característiques, la seguretat i la resolució de problemes.
	Guia de l'usuari del bastidor Radial Workhorse Powerhouse sèrie 500 Guia d'usuari del Radial Workhorse Powerhouse, un bastidor de rack de la sèrie 500 de 10 ranures. Detalla les característiques, la instal·lació, el flux del senyal, la font d'alimentació, les especificacions i la informació de garantia per a enginyers d'àudio professionals.
	Guia de l'usuari del divisor de línia aïllada amb transformador de vuit canals Radial LX8 Guia d'usuari completa per al Radial LX8, un divisor de línia aïllat per transformador de vuit canals dissenyat per a aplicacions d'àudio professionals. Aprèn sobre les seves característiques, el flux de senyal, les connexions i la resolució de problemes per aconseguir una qualitat d'àudio professional i eliminar el soroll del bucle de terra.

Radial Engineering R800 1038