Puig Chain Tensioner 20685N User Manual

1. Introducció

This manual provides essential information for the proper installation, operation, and maintenance of your Puig Chain Tensioner, Model 20685N. Designed for specific Aprilia motorcycle models, this product offers a precise and durable solution for chain adjustment. Please read this manual thoroughly before proceeding with installation or use to ensure safety and optimal performance.

2. Informació de seguretat

• Utilitzeu sempre l'equip de protecció individual (EPI) adequat durant la instal·lació.
• Ensure the motorcycle is stable and securely supported before beginning any work.
• If you are unsure about any step, consult a qualified motorcycle mechanic.
• Do not modify the chain tensioner or use it for purposes other than its intended design.
• After installation, verify all fasteners are tightened to the manufacturer's recommended torque specifications.
• Regularly inspect the chain tensioner for any signs of wear or damage.

3. Contingut del paquet

Verifiqueu que tots els components siguin presents i no estiguin danyats abans de continuar amb la instal·lació.

• Puig Chain Tensioner (Left and Right units)
• Mounting hardware (screws, washers, etc., if applicable)
• Manual d'instruccions (aquest document)

Image 1: The Puig Chain Tensioner 20685N, showing both left and right units along with associated mounting screws. The tensioners are black, made from aluminum, and feature adjustment markings.

4. Compatibilitat

The Puig Chain Tensioner Model 20685N is compatible with the following Aprilia motorcycle models:

• Aprilia RSV4 R (2013, 2014)
• Aprilia RSV4 RF (2017, 2018)
• Aprilia TUONO V4 1100 FACTORY (2015, 2016, 2017, 2018, 2019, 2020)
• Aprilia TUONO V4 1100 RR (2014, 2015, 2016, 2017, 2018, 2019, 2020)
• Aprilia TUONO V4 (2021, 2022)
• Aprilia TUONO V4 FACTORY (2021, 2022)
• Aprilia TUONO V4R (2012, 2013, 2014)

Note: Always verify compatibility with your specific motorcycle model and year before purchase and installation.

5. Característiques del producte

The Puig Chain Tensioner 20685N is engineered with the following characteristics:

• Construcció d'alta qualitat: Manufactured from high-quality materials, milled from a solid aluminum block for enhanced durability and a superior finish.
• Efficient Adjustment System: Features an effective adjustment mechanism with clear markings on the upper part to simplify chain tensioning.
• Disseny integrat: Designed to integrate seamlessly into the swingarm of compatible motorcycles.
• Anodized Finish: Anodized in black for corrosion resistance and aesthetic integration with the motorcycle.

6. Configuració i instal·lació

This section outlines the general steps for installing the Puig Chain Tensioner. Specific torque values and detailed steps may vary by motorcycle model. Refer to your motorcycle's service manual for precise instructions.

1. Preparació de la motocicleta: Park the motorcycle on a stable stand, ensuring the rear wheel is off the ground.
2. Remove Existing Tensioners: Loosen the rear axle nut and any existing chain tensioner bolts. Carefully remove the old chain tensioners.
3. Install Puig Tensioners: Position the new Puig Chain Tensioners into the swingarm slots. Ensure they are correctly oriented (left and right sides).
4. Reinstall Rear Axle: Slide the rear axle through the swingarm and the new tensioners. Do not fully tighten the axle nut yet.
5. Ajustar la tensió de la cadena: Use the adjustment screws on the Puig tensioners to set the correct chain slack as specified in your motorcycle's service manual. Ensure both sides are adjusted equally using the integrated markings.
6. Tighten Axle Nut: Once the chain tension is correct, tighten the rear axle nut to the manufacturer's specified torque.
7. Comprovació final: Verify chain tension, alignment, and ensure all bolts are securely fastened. Rotate the wheel to check for any binding or issues.

Important: Incorrect chain tension or alignment can lead to premature wear of the chain, sprockets, and other components, and can be a safety hazard.

7. Operating Instructions (Chain Adjustment)

The Puig Chain Tensioner simplifies the process of adjusting your motorcycle's chain tension.

1. Loosen Axle Nut: Slightly loosen the rear axle nut to allow the wheel to move.
2. Ajustar la tensió: Turn the adjustment screws on each chain tensioner. Turning clockwise will move the wheel backward, increasing chain tension. Turning counter-clockwise will move the wheel forward, decreasing chain tension.
3. Match Markings: Use the precise markings on the top of each tensioner to ensure both sides are adjusted equally, maintaining proper wheel alignment.
4. Check Chain Slack: Measure the chain slack at its tightest point, typically in the middle of the lower chain run, according to your motorcycle's specifications.
5. Tighten Axle Nut: Once the desired chain slack is achieved and both tensioners are equally set, tighten the rear axle nut to the manufacturer's recommended torque.
6. Re-check: After tightening, re-check the chain slack and wheel alignment to confirm they remain correct.

8. Manteniment

Regular maintenance ensures the longevity and proper function of your Puig Chain Tensioner.

• Neteja: Periodically clean the chain tensioners to remove dirt, grime, and chain lubricant buildup. Use a mild cleaner and a soft cloth.
• Inspecció: Regularly inspect the tensioners for any signs of wear, cracks, bending, or corrosion. Check the adjustment screws for smooth operation.
• Lubricació: Apply a small amount of appropriate grease to the adjustment screw threads to ensure smooth operation and prevent seizing.
• Comprovació de fixació: Ensure all mounting bolts and the rear axle nut remain properly torqued.

9. Solució De Problemes

10. Especificacions

11. Garantia i Suport

For warranty information or technical support regarding your Puig Chain Tensioner, please refer to the official Puig website or contact your authorized Puig dealer. Keep your proof of purchase for warranty claims.

Puig Official Weblloc: www.puig.tv