Manual d'usuari del pany de palanca digital COMMAX CDL-100WL

1. Introducció

This manual provides detailed instructions for the installation, operation, and maintenance of the COMMAX CDL-100WL Digital Lever Lock. Please read this manual thoroughly before installation and use to ensure proper functionality and safety.

Image: The COMMAX CDL-100WL Digital Lever Lock, featuring a sleek silver and black design. The lever handle incorporates a hidden touchscreen keypad for code entry and a dedicated area for tag-key access. The main body is a robust cylindrical shape.

2. Característiques del producte

• Mètodes d'accés: Supports User PIN code (up to 4) and Tag-Key (up to 30).
• Flex Lock: Allows switching between Automatic and Manual locking modes via a slide switch inside the inner body.
• Dual Lock: Enhances security by preventing external access when activated, suitable for increased privacy or security needs.
• Alerta de bateria baixa: Provides visual (Warning Light) and audible (Alarm Sounds) notifications when battery power is low.
• Font d'alimentació d'emergència: In case of complete battery discharge, the lock can be temporarily powered using a 9V battery or a Micro USB 5-pin cable for emergency access.
• High Temperature Detection: Automatically unlocks the door with warning sounds if the internal temperature rises significantly due to fire, facilitating emergency exit. (Note: This function does not activate if the external temperature rises first.)

3. Instal·lació i configuració

3.1. Contingut del paquet

Verifiqueu que tots els components siguin presents abans de començar la instal·lació:

• Out-body (Exterior Unit)
• In-body (Interior Unit)
• Pestillo-perrella
• Eix
• Manuals (English, Korean)
• Cargols i cargols

3.2. Comprovacions prèvies a la instal·lació

Assegureu-vos que la vostra porta compleixi les especificacions següents:

• Door thickness compatible with the lock.
• Proper backset for the latch bolt.
• Clearance for the lock body on both sides of the door.

3.3. Passos d'instal·lació

1. Prepara la porta: If replacing an existing lock, remove it. Ensure the door boreholes are clean and correctly sized.
2. Install Latch-Bolt: Insert the latch-bolt into the door edge, ensuring the bevel faces the door frame. Secure with screws.
3. Install Out-body: Pass the cables and shaft through the door from the exterior side. Align the out-body with the latch-bolt.
4. Install In-body: Connect the cables from the out-body to the in-body. Align the in-body with the shaft and secure it to the out-body using the provided bolts.
5. Insereix les piles: Open the battery cover on the in-body and insert the required batteries (typically AA, not specified in product data, but common for digital locks). Ensure correct polarity.
6. Prova de funcionament: Close the door and test the lock's basic functions before proceeding with programming.

4. Instruccions de funcionament

4.1. Initial Setup and Master PIN Code Registration

Upon first power-up, you will need to register a Master PIN Code. Refer to the included English manual for specific steps, as this is crucial for all subsequent programming.

4.2. Registering User PIN Codes

Follow the instructions in the manual to add up to 4 user PIN codes. Each user code should be unique and easy to remember for authorized users.

4.3. Registering Tag- Claus

The lock supports up to 30 Tag-Keys. To register a Tag-Key, enter programming mode (using the Master PIN Code) and follow the prompts to scan the Tag-Key.

4.4. Obrint la porta

• Ús del codi PIN: Touch the keypad to activate, enter your PIN code, and press the '*' button (or equivalent confirmation button). Turn the lever to open.
• Utilitzant Tag-Key: Place the registered Tag-Key on the designated reader area. Turn the lever to open.

4.5. Tancant la porta amb clau

• Bloqueig automàtic: If Flex Lock is set to Automatic mode, the door will lock automatically a few seconds after closing.
• Bloqueig manual: If Flex Lock is set to Manual mode, press the '*' button (or equivalent lock button) on the keypad from the outside, or turn the thumb-turn from the inside.

4.6. Dual Lock Function

To activate Dual Lock, engage the specific mechanism on the interior unit (refer to the manual for exact location and operation). This prevents the lock from being opened from the outside, even with a valid PIN or Tag-Key.

5. Manteniment

• Substitució de la bateria: Replace all batteries when the low battery alert is activated. Use high-quality alkaline batteries. Do not mix old and new batteries.
• Neteja: Clean the lock's exterior with a soft, dry cloth. Avoid abrasive cleaners or solvents that could damage the finish or electronic components.
• Comprovacions periòdiques: Periodically check that all screws are tight and that the lock operates smoothly. Do not lubricate the internal electronic components.

6. Solució De Problemes

7. Especificacions

• Marca: ComMax
• Nom del model: CDL-100WLCARD
• Tipus de bloqueig: Teclat
• Característica especial: Pantalla tàctil
• Color: Plata, Negre
• Dimensions de l'article (L x A x A): 11.6 x 4.3 x 4.3 polzades
• Pes de l'article: 3.3 lliures
• Font d'alimentació: Battery powered (Batteries not included, typically AA)
• Mètode de control: Toca
• Components inclosos: Out-body, In-body, Latch-Bolt, Shaft, Manuals (English, Korean), Bolts

8. Garantia i Suport

For warranty information and technical support, please refer to the specific warranty card included with your product or visit the official ComMax weblloc web. Conserveu el rebut de compra com a comprovant de compra.

Fabricant: COMMAX

Weblloc: Visit the ComMax Store on Amazon