1. Introducció
This manual provides detailed instructions for the installation, operation, and maintenance of your Veise VS01 Keyless Entry Electronic Keypad Deadbolt. Please read this manual thoroughly before installation and use to ensure proper function and longevity of the product.
The Veise VS01 offers enhanced security and convenience with features such as multiple user codes, auto-locking, and an anti-peeking password function. It is designed for easy installation on most standard doors.
2. Què hi ha a la caixa
Carefully unpack your Veise VS01 Keyless Entry Electronic Keypad Deadbolt and verify that all components are present:
- 1x Keypad Deadbolt (Exterior Assembly)
- 1x Interior Assembly
- 1x Latch
- 1x Strike Plate
- 1x placa de muntatge
- Screws (various sizes for installation)
- Manual d’instruccions d’instal·lació
- Instruccions de programació
- Eina de restabliment
3. Configuració i instal·lació
Follow these steps for proper installation of your Veise VS01 Keyless Entry Electronic Keypad Deadbolt. A screwdriver is the only tool required for most installations.
3.1 Measure Door Dimensions
Abans de la instal·lació, assegureu-vos que la porta compleixi les especificacions següents:
- Door thickness: 1-3/8" to 2" (35mm to 50mm)
- Cross bore diameter: 2-1/8" (54mm)
- Backset: Adjustable for 2-3/8" (60mm) or 2-3/4" (70mm)
- Edge bore diameter: 1" (25mm)
Ensure the hole in the door frame for the strike plate is drilled a minimum of 1" (25mm) deep.
Image: Door dimensions and lock compatibility for standard doors.
3.2 Install the Latch and Strike Plate
Install the latch into the edge bore of the door. Adjust the backset if necessary (2-3/8" or 2-3/4"). Secure the latch with the provided screws. Install the strike plate on the door frame, aligning it with the latch mechanism, and secure it with screws.
3.3 Mount the Exterior and Interior Assemblies
With the latch fully retracted (in the unlocked position), insert the exterior keypad assembly. Route the cable from the exterior assembly below the latch. Install the mounting plate on the interior side of the door, securing it with screws. Connect the cable connector from the exterior assembly to the socket on the interior assembly, ensuring it is fully attached. Align the axle from the exterior assembly with the hole in the latch. Attach the interior assembly to the mounting plate and tighten the remaining screws.
3.4 Battery Installation and Initial Reset
The lock requires 4 AA batteries (not included). Load 3 AA batteries into the battery compartment. Press and hold the Reset button on the interior assembly using the reset tool. While holding the Reset button, load the 4th battery and continue holding the Reset button for 3 seconds. Release the button and cover the battery compartment. This completes the initial reset and calibration.
Image: Interior assembly with battery compartment and reset button.
3.5 Guia de vídeo d'instal·lació
For a visual guide on the installation process, please refer to the official Veise VS01 Keypad Deadbolt Installation Video:
Video: Official Veise VS01 Keypad Deadbolt Installation Guide.
4. Instruccions de funcionament
Your Veise VS01 Keyless Entry Electronic Keypad Deadbolt offers various convenient and secure operating modes.
4.1 Keyless Entry and User Codes
The lock supports up to 20 individual user codes for family and trusted friends, plus an available one-time code for temporary visitors. This eliminates the need for physical keys.
Image: Keypad illustrating the 21 access code capacity.
4.2 Bloqueig automàtic i bloqueig d'un sol toc
- Bloqueig automàtic: This feature automatically locks the door after a set period (10-99 seconds) once it's closed. This provides peace of mind, especially when leaving in a hurry.
- Bloqueig d'un sol toc: To manually lock the door from the outside, simply press and hold any key on the keypad for 2 seconds.
Image: Auto-lock and one-touch locking features.
4.3 Anti-Peeking Password
Enhance your security by entering random digits before or after your actual code. This prevents others from guessing your code by observing your finger movements on the keypad.
Image: Anti-peeking password in use.
4.4 Mode silenciós
Enable silent mode to disable keypad beeps, which is useful for quiet entry or exit, especially during late hours or when children are sleeping.
Image: Silent mode feature.
4.5 Mode de vacances
Activate vacation mode for extended periods away from home. This feature disables all user codes temporarily, providing an extra layer of security when your property is vacant.
Image: Vacation mode feature.
4.6 Programming Video Guide
For detailed instructions on programming user codes, master codes, and other settings, please watch the official Veise VS01 Programming Video:
Video: Official Veise VS01 Programming Guide.
5. Manteniment
5.1 Durada i substitució de la bateria
The electronic keypad door lock operates on 4 AA batteries (not included) and can last for approximately 1 year under normal use. The lock features a low battery alert function to notify you when batteries need replacement. It is recommended to use alkaline AA batteries; rechargeable batteries are not recommended.
Image: Low battery alert and emergency power port.
5.2 Emergency Power Port
In case of complete battery depletion, you can temporarily power the lock using an external power bank connected to the emergency power port. This allows you to enter your code and replace the batteries.
5.3 Neteja
Netegeu el teclat numèric i l'exterior del pany amb un drap suau.amp drap. Eviteu utilitzar productes de neteja abrasius o dissolvents, ja que poden danyar l'acabat o els components electrònics.
6. Solució De Problemes
If you encounter issues with your Veise VS01 lock, refer to the following common problems and solutions:
- El pany no respon: Check battery levels. If batteries are low or dead, replace them or use the emergency power port. Ensure the cable connection between the exterior and interior assemblies is secure.
- Programming difficulties: Refer to the programming video or the dedicated programming instructions. Ensure you are following the steps precisely, especially regarding the master code and user code entry sequences. A common issue is incorrect entry of the master code or not pressing '#' after each step.
- Auto-lock engaging prematurely or not at all: Verify the auto-lock duration setting. Ensure the door closes completely and the latch can fully extend into the strike plate without obstruction.
- El teclat no s'il·lumina: Check battery levels. If the batteries are new and correctly installed, contact customer support.
- Límit d'entrada de codi incorrecte: After 10 invalid code entries, the lock will temporarily disable for 3 minutes to prevent unauthorized access. Wait for the lockout period to expire before attempting to enter the code again.
Image: Wrong code entry limit feature.
7. Especificacions
| Marca | Veise |
| Nom del model | VS01 |
| Tipus de bloqueig | Teclat Deadbolt |
| Material | Acrilonitril butadiè estirè, alumini |
| Color | Negre |
| Dimensions de l'article L x W x H | 3.64 x 2.65 x 0.64 polzades |
| Pes de l'article | 1.53 lliures |
| Font d'alimentació | 4 piles AA (no incloses) |
| Característiques especials | 20 individual user codes, One-time code, Auto-locking, 1-touch locking, Anti-peeking password, Emergency power port, Easy installation |
| Usos recomanats | Residential door security and access control (Bedroom, Garage, Laundry, Shed doors, etc.) |
| Resistència ambiental | IP54 Waterproof, -22 °F Low Temperature Resistance, 158 °F High Temperature Resistance |
Image: Environmental resistance features.
8. Garantia i Suport
Veise offers a minimum of 1 year product warranty from the date of purchase. For any questions, technical assistance, or warranty claims, please contact Veise customer support. 24/7 email support is available to assist you.
Per obtenir més ajuda, visiteu el Veise Store on Amazon.
