Manual d'usuari del termòstat intel·ligent Emerson Sensi Touch 2 (ST76W)

Introducció

This manual provides detailed instructions for the installation, operation, and maintenance of your Emerson Sensi Touch 2 Smart Thermostat. Designed for ease of use and energy efficiency, this thermostat allows you to control your home's comfort from anywhere using its touchscreen display or the Sensi mobile application.

The Sensi Touch 2 thermostat is compatible with most HVAC systems requiring a common wire (C-wire) and integrates with popular smart home platforms like Amazon Alexa and Google Assistant.

The Sensi Touch 2 Smart Thermostat features a clear, intuitive touchscreen display.

Què hi ha a la caixa

Verifiqueu que tots els components siguin presents abans de començar la instal·lació:

• Sensi Touch 2 Thermostat
• Maquinari de muntatge (cargols i ancoratges)
• Guia d'instal·lació
• Manual del propietari (aquest document)
• Llibret de garantia

Included components for installation.

Requisits de compatibilitat

The Sensi Touch 2 Smart Thermostat is designed for 20-30 VAC systems. It is compatible with most conventional heating and cooling systems, including:

• Single-stage i multi-stage conventional systems (gas, oil, propane furnace, electric furnace, boiler/radiant, air conditioner)
• Heat pump systems (with or without auxiliary heat)

Requisit del cable C: A common wire (C-wire) is required for all Sensi Touch 2 installations to provide continuous power to the thermostat. If your current thermostat wiring does not include a C-wire, professional installation or the use of a Sensi C-wire adapter (sold separately) may be necessary.

Sistemes incompatibles:

• Línia voltage systems (typically have thick wires, 120V or 240V)
• Millivolt systems (operate on very low power, less than one volt)
• Communicating/Proprietary systems

Refer to the compatibility chart to ensure your HVAC system is supported.

Configuració i instal·lació

The Sensi app provides step-by-step guidance for installation. It is recommended to use the app for the most accurate and personalized instructions.

1. Download the Sensi App

Download the Sensi app from the Apple App Store or Google Play Store on your smartphone or tablet.

2. Apagar el sistema de climatització

Before beginning any wiring, turn off the power to your heating and cooling system at the circuit breaker.

3. Treure el termòstat antic

Carefully remove your old thermostat's faceplate. Take a picture of the wiring connections for reference. Disconnect the wires and remove the old mounting plate.

4. Install Sensi Mounting Plate

Mount the Sensi backplate to the wall using the provided screws and anchors. The thermostat has a built-in level for easy alignment.

The Sensi app guides you through the installation process, including mounting the backplate.

5. Wire the Thermostat

Connect the wires to the corresponding terminals on the Sensi backplate. Refer to the picture you took of your old thermostat's wiring and the Sensi app's instructions. Ensure the C-wire is connected.

6. Attach Thermostat Faceplate

Once wiring is complete, snap the Sensi Touch 2 faceplate onto the mounting plate.

7. Restore Power and Connect to Wi-Fi

Turn the power back on to your HVAC system. Follow the on-screen prompts on the thermostat and in the Sensi app to connect your thermostat to your home's Wi-Fi network. The app uses Bluetooth technology for initial setup.

Funcionament del termòstat

Control manual

You can adjust the temperature directly on the thermostat's touchscreen. Use the '+' and '-' buttons to set your desired temperature. The display shows the current temperature, set temperature, and system mode.

Sensi App Control

The Sensi app provides full remote control and advanced features:

• Accés remot: Ajusteu la configuració des de qualsevol lloc.
• Horari flexible: Create custom 7-day heating and cooling schedules to optimize comfort and energy savings.
• Geofencing: Utilize location-based temperature control to automatically adjust settings when you leave or return home.
• Informes d'ús: Monitor your HVAC energy consumption.

Control your Sensi thermostat remotely using the mobile app.

Room Sensors (Sold Separately)

The Sensi Touch 2 is compatible with Sensi Room Sensors. These sensors help balance temperatures across different areas of your home by providing additional temperature readings. You can average temperatures or prioritize specific sensor locations for heating and cooling.

Sensi room sensors help maintain balanced temperatures throughout your home.

Integració de la llar intel·ligent

Integrate your Sensi Touch 2 thermostat with:

• Amazon Alexa: Use voice commands to adjust temperature.
• Assistent de Google: Control your thermostat with Google smart devices.
• Samsung SmartThings: Connect for broader home automation.

Manteniment

Smart Maintenance Features

The Sensi app provides smart maintenance features to help monitor your HVAC system's performance:

• Informes d'ús: Detailed reports on heating and cooling run times.
• Alertes d'equipament: Notifications regarding potential system issues.
• Recordatoris de manteniment: Timely reminders for tasks like filter replacement.

Neteja del termòstat

Per netejar la pantalla tàctil del termòstat i casing, netegeu suaument amb un drap suau, damp cloth. Avoid using abrasive cleaners or solvents, as these can damage the finish and screen.

Resolució de problemes

If you encounter issues with your Sensi Touch 2 Smart Thermostat, consider the following common solutions:

• Sense alimentació al termòstat: Ensure the C-wire is properly connected and the power to your HVAC system is on at the circuit breaker.
• Problemes de connectivitat Wi-Fi:
  • Verify your home Wi-Fi network is operational.
  • Ensure your router supports 2.4 GHz Wi-Fi (Sensi thermostats primarily use 2.4 GHz).
  • Try rebooting your Wi-Fi router and the thermostat.
  • If using a combined 2.4/5.0 GHz network, consider creating a separate 2.4 GHz network if issues persist.
• Room Sensor Not Connecting: Ensure the room sensor is within range of the thermostat and has fresh batteries. Allow a few minutes for the sensor to pair after initial setup.
• Lectures de temperatura inexactes: Assegureu-vos que el termòstat no estigui exposat a la llum solar directa, corrents d'aire ni fonts de calor que puguin afectar el seu sensor intern.
• El sistema no respon a les ordres: Check wiring connections at the thermostat and HVAC system. Ensure the correct system type is selected in the Sensi app settings.

For further assistance, refer to the Sensi app's help section or contact customer support.

Especificacions

Physical dimensions of the Sensi Touch 2 Smart Thermostat.

Informació de la garantia

The Emerson Sensi Touch 2 Smart Thermostat comes with a 3-year limited warranty. Please refer to the included Warranty Booklet for full terms and conditions, including details on coverage and how to make a claim.

Atenció al client

For technical assistance, troubleshooting, or warranty inquiries, please visit the official Sensi website or contact Emerson customer support. Contact information can typically be found in the Sensi app or on the Emerson weblloc.