1. Informació de seguretat
Si us plau, llegiu atentament totes les instruccions abans del muntatge i l'ús. Conserveu aquest manual per a futures consultes.
- Ensure not to exceed the maximum weight capacity of 300 lliuresLa sobrecàrrega pot causar danys o lesions.
- Adjust the chair according to the user's height and follow the assembly instructions precisely for safe use.
- Mantingueu els nens allunyats de la zona de muntatge. Les peces petites poden suposar un perill d'asfíxia.
- Regularly check all bolts and screws to ensure they are tightened. Re-tighten if necessary.
- No us atureu a la cadira.
- Feu servir la cadira només per a la seva finalitat prevista, com a cadira d'oficina o d'escriptori.
Image: SGS BIFMA certified gas lift, indicating compliance with safety and durability standards.
2. Contingut del paquet
Verifiqueu que tots els components siguin presents abans de començar el muntatge. Si falta alguna peça o hi ha alguna peça danyada, poseu-vos en contacte amb el servei d'atenció al client.
- Backrest Assembly (1)
- Coixí de seient (1)
- Reposacaps (1)
- Reposabraços (2)
- Gas Lift Cylinder (1)
- Star Base (1)
- Rodes (5)
- Mechanism Plate (1)
- Hardware Kit (Screws, Washers, Allen Wrench) (1)
- Manual d'usuari (1)
3. Instruccions de muntatge
Assembly typically takes 10-15 minutes. Follow these steps carefully.
- Fixeu les rodes a la base: Insert the five casters into the holes at the end of each leg of the star base until they click securely into place.
- Inseriu l'elevador de gas: Col·loqueu el cilindre d'elevació de gas al forat central de la base en estrella.
- Fixeu la placa del mecanisme al seient: Align the mechanism plate with the pre-drilled holes on the underside of the seat cushion. Ensure the lever is on the right side when facing the front of the seat. Secure with screws from the hardware kit using the provided Allen wrench.
Imatge: Part inferior view of the chair's mechanism plate, which attaches to the seat and controls adjustments.
- Fixar els reposabraços al seient: Secure the armrests to the sides of the seat cushion using the designated screws. Ensure they are firmly attached.
- Fixar el respatller al seient: Align the backrest with the mounting points on the seat cushion and armrests. Secure with screws.
- Fixar el reposacaps: Insert the headrest into the top of the backrest until it is securely in place.
- Connecteu el seient a l'elevador de gas: Carefully place the assembled seat and backrest onto the gas lift cylinder, ensuring it is centered and fully seated.
Imatge: Anvers i revers view of the fully assembled Flysky Ergonomic Office Desk Chair.
4. Instruccions de funcionament
The Flysky Ergonomic Office Desk Chair offers multiple adjustments for personalized comfort.
4.1 Adjusting Chair Height
- To raise the seat: While standing, pull the lever located under the right side of the seat upwards. The seat will rise. Release the lever at the desired height.
- To lower the seat: While seated, pull the lever located under the right side of the seat upwards. The seat will lower. Release the lever at the desired height.
Image: Close-up of the height adjustment lever located beneath the seat.
4.2 Adjusting Recline and Tilt Tension
- Recline Function (90°-120°): Push the same lever used for height adjustment inwards to lock the backrest in an upright position (90° work mode). Pull the lever outwards to unlock the recline function, allowing the backrest to tilt back (up to 120° rest/sleep mode).
- Tensió d'inclinació: Rotate the round knob located under the front-center of the seat. Turn clockwise to increase tilt tension (making it harder to recline) or counter-clockwise to decrease tension (making it easier to recline).
Image: Diagram illustrating the tilt and rocking function, showing the height lock lever and tilt tension knob.
4.3 Adjusting Headrest
- Ajust d'alçada: Gently pull the headrest up or push it down to adjust its vertical position (up to 3.2 inches).
- Ajust d'angle: Rotate the headrest forward or backward (up to 90°) to find the optimal angle for neck support.
Imatge: Detallada view of the adjustable headrest, showing lift, down, forward, backward, and rotation capabilities.
4.4 Adjusting Lumbar Support
- The chair features a 3D self-adaptive elastic lumbar pillow designed to conform to your lower back. No manual adjustment is typically required for its position, as it flexes with your posture.
Imatge: Més deview of ergonomic design, highlighting headrest, back support, lumbar support, and hip support.
4.5 Using Flip-Up Armrests
- To flip up the armrests: Gently lift the armrests upwards until they lock into a vertical position. This allows the chair to be pushed closer to a desk or stored more compactly.
- To lower the armrests: Pull the armrests downwards until they return to their horizontal position.
Image: Illustration of the flip-up armrest feature, showing the armrest in both down and up positions.
5. Manteniment
Proper maintenance will extend the life and appearance of your chair.
- Neteja: Netegeu amb un anunciamp cloth. For mesh areas, use a soft brush or vacuum cleaner to remove dust and debris. Avoid harsh chemicals or abrasive cleaners.
- Inspecció: Periodically check all screws and bolts for tightness. Re-tighten as needed to prevent loosening and ensure stability.
- Cura de les rodes: Mantingueu les rodes lliures de cabells i deixalles per garantir un moviment suau.
Image: Close-up of the breathable mesh fabric used for the chair's backrest and headrest.
6. Solució De Problemes
Consulteu aquesta secció per conèixer els problemes comuns i les seves solucions.
| Problema | Causa possible | Solució |
|---|---|---|
| La cadira trontolla o se sent inestable | Cargols solts o muntatge desigual. | Check and tighten all screws, especially those connecting the seat, backrest, and mechanism plate. Ensure casters are fully inserted. |
| La cadira no ajusta l'alçada | Gas lift lever not engaged correctly or gas lift cylinder malfunction. | Ensure the lever is fully pulled up. If the issue persists, the gas lift cylinder may need replacement. Contact customer support. |
| Les rodes no giren suaument | Restes atrapades a les rodes o rodes danyades. | Remove any hair or debris from the caster wheels. If damaged, casters can be replaced. |
| El respatller no es reclina ni es bloqueja | Recline lever not engaged or tilt tension too high. | Pull the recline lever outwards to unlock. Adjust the tilt tension knob counter-clockwise to reduce tension. |
7. Especificacions
Key technical specifications for the Flysky Ergonomic Office Desk Chair Model S5016.
| Característica | Detall |
|---|---|
| Nom del model | S5016 |
| Marca | Flysky |
| Color | Malla Negre |
| Dimensions del producte (P x A x A) | 28"D x 22"W x 42"H (Adjustable height) |
| Recomanació de pes màxim | 300 lliures |
| Pes de l'article | 20 lliures |
| Estil d'esquena | Part posterior de malla |
| Característiques especials | Adjustable Height, Arm Rest (Flip-Up), Ergonomic, Head Support, Rolling, Lumbar Support |
| Recompte de posicions reclinables | >=2 (90°-120°) |
| Material de farciment | Malla |
| Moviment de base de mobles | Giratòria |
Image: Diagram showing the key dimensions of the Flysky Ergonomic Office Desk Chair.
Image: Illustration of the chair's sturdy base, highlighting its 300 lbs weight capacity.
8. Garantia i Suport
For warranty information, technical support, or to inquire about replacement parts, please contact Flysky customer service. Refer to the contact information provided with your purchase or visit the official Flysky weblloc.
We are committed to assisting you with any questions or concerns regarding your product.
