Cisco CS-BAR-T-C-K9

Cisco CS-BAR-T-C-K9 User Manual

Webex Room Bar with Table Stand Navigator

Producte acabatview

The Cisco CS-BAR-T-C-K9 is a comprehensive video conferencing solution designed for modern meeting spaces. It integrates a powerful camera, speakers, and microphones into a single device, complemented by a dedicated touch-panel controller for intuitive interaction. This system is ideal for enhancing collaboration and communication in various professional environments.

Cisco Webex Room Bar and Navigator touch controller

Image: The Cisco Webex Room Bar (top) and the Navigator touch controller (bottom right).

Contingut del paquet

En desembalar, comproveu que hi hagi tots els components:

Note: The exact contents may vary slightly based on the specific kit purchased.

Guia de configuració

1. Col·locació física

Position the Cisco Webex Room Bar centrally below or above your display. Ensure it has a clear line of sight to participants and is not obstructed. The Navigator touch controller should be placed on a table within easy reach of users.

2. Connexions de cable

  1. Potència: Connect the power adapter to the Room Bar and then to a power outlet.
  2. Sortida HDMI: Connect an HDMI cable from the Room Bar's HDMI OUT port to your display's HDMI input.
  3. HDMI In (Optional): If you plan to share content from a laptop, connect an HDMI cable from the Room Bar's HDMI IN port to your laptop.
  4. Xarxa: Connect an Ethernet cable from the Room Bar's LAN port to your network switch or router.
  5. Navigator Connection: The Navigator typically connects wirelessly or via a dedicated cable to the Room Bar. Follow the on-screen prompts for pairing if necessary.

3. Configuració Inicial

Once powered on, the Room Bar will guide you through the initial setup process on the connected display and Navigator. This includes network settings, time zone, and pairing the Navigator.

Instruccions de funcionament

Using the Navigator Touch Controller

The 10-inch Navigator touch controller (Screen Resolution: 1920 x 1080 pixels) is your primary interface for controlling the Cisco Webex Room Bar. It runs on an Android operating system.

Connectivitat sense fil

The device supports 802.11ac wireless connectivity for network access and certain wireless sharing features.

Manteniment

Resolució de problemes

ProblemaCausa possibleSolució
Sense poderCable d'alimentació desconnectat; problema amb la presa de corrent.Comproveu les connexions del cable d'alimentació. Proveu una altra presa de corrent.
No es mostra cap vídeoHDMI cable disconnected; incorrect display input.Verify HDMI cable connection from Room Bar to display. Select correct HDMI input on display.
Sense àudioVolume too low; external audio system issue.Increase volume on Navigator. Check external audio system connections if used.
Navigator not respondingNavigator battery low; connection issue.Charge Navigator. Re-pair Navigator with Room Bar if necessary (refer to setup guide).
No es pot connectar a la xarxaEthernet cable issue; incorrect network settings.Check Ethernet cable. Verify network settings on the device or through IT support.

Especificacions

CaracterísticaDetall
Número de modelCS-BAR-T-C-K9
MarcaCisco
DescripcióWebex Room Bar with Table Stand Navigator
Sistema operatiuAndroid
Screen Size (Navigator)10 polzades
Screen Resolution (Navigator)1920 x 1080 píxels
Tipus sense fil802.11ac
Marca del processadorIntel
Capacitat d'emmagatzematge de memòria64 GB
Pes de l'article2.2 lliures
Dimensions del paquet3.94 x 0.79 x 0.79 polzades
BateriesCalen piles específiques del producte.

Garantia i Suport

For warranty information and technical support, please refer to the official Cisco documentation included with your product or visit the Cisco support weblloc. Els termes de la garantia solen cobrir els defectes de fabricació durant un període especificat a partir de la data de compra.

Assistència en línia: www.cisco.com/go/support

Contacte amb l'assistència: Refer to your regional Cisco contact information for phone or email support.

Documents relacionats - CS-BAR-T-C-K9

Preview Notes de la versió del controlador sense fil Cisco Catalyst sèrie 9800: Cisco IOS XE Bengaluru 17.5.x
Aquest document proporciona notes de versió per als controladors sense fil Cisco Catalyst sèrie 9800 que executen Cisco IOS XE Bengaluru 17.5.x, i detalla les noves funcions, les correccions d'errors i els problemes coneguts.
Preview Matriu de compatibilitat dels components de control SD-WAN de Cisco Catalyst, versió 20.12.x
Aquest document proporciona una matriu de compatibilitat per als components de control Cisco Catalyst SD-WAN, versió 20.12.x, que detalla les versions de programari compatibles per a diverses plataformes d'encaminament i plataformes virtuals de Cisco.
Preview Cisco 4G LTE Software Configuration Guide: EHWICs, ISRs, and Deployment
Configure Cisco 4G LTE Wireless WAN solutions with this comprehensive guide. Covers EHWICs, ISR routers (819, C880, C890 series), features, prerequisites, restrictions, and SKU details for global deployment.
Preview Guia de configuració del controlador sense fil de Cisco versió 8.10 | Administració de xarxa
Guia completa per configurar i gestionar els controladors sense fil de Cisco, que cobreix l'administració, les llicències, les actualitzacions de programari, la configuració de la xarxa, la seguretat, la mobilitat, els punts d'accés i la resolució de problemes per a la versió 8.10.
Preview Cisco NCS 1004 Configuration Guide - IOS XR 7.9.x
A comprehensive guide to configuring the Cisco NCS 1004 network platform with IOS XR Release 7.9.x, covering line card setup, muxponder/transponder modes, and advanced optical networking features.
Preview Cisco UC 560 Quick Start Guide: Installation and Configuration
This Cisco UC 560 Quick Start Guide provides essential information for installing, connecting, and configuring the Cisco Unified Communications 500 Series Model UC 560 for small businesses. Learn about hardware setup, network connections, software installation, and initial configuration using Cisco Configuration Assistant (CCA).