Producte acabatview
Thank you for choosing Pulsar Bluetooth In-Ear Earphones. This manual provides essential information for setting up, operating, and maintaining your earphones to ensure optimal performance and longevity.
Image showing the retail packaging of the Pulsar Bluetooth Earphones, highlighting features like 'Rechargeable', 'Extra Earbuds', and 'Magnetic Design'.
Característiques del producte
- Versió de Bluetooth: 5.0
- Distància sense fil: 10 metres
- Mida del conductor: 10 mm
- Impedància: 32 ohms
- Sensibilitat: 105 dB
- Resposta de freqüència: 20 Hz - 20 kHz
- Integrated rechargeable USB charging cable (Included)
- Extra earbuds for comfortable fit
Configuració
Carregant la bateria
The earphone is equipped with a 3.7 V 55 mAh Li-po battery. It is recommended to fully charge the battery before first use. This process takes approximately 2 hours.
- Connect the micro USB end of the USB charging cable to the 5V, 0.5A DC charging port on the earphone.
- Connect the other end of the USB charging cable to a compatible USB port (e.g., computer, wall adapter).
- During charging, the LED indicator light will illuminate vermell.
- Once the battery is fully charged, the LED indicator light will turn blau.
- Gently disconnect both ends of the USB charging cable and store the cable safely for future use.
Primer pla view of the Pulsar Bluetooth Earphones in green, showcasing the in-ear design and the connecting cable.
En funcionament
Bluetooth Pairing with a Compatible Device
Follow these steps to pair your Pulsar earphones with a Bluetooth-enabled device:
- Once the earphone is powered on, the LED indicator light will quickly flash blau i taronja. This indicates that the earphone is ready to be paired with a compatible Bluetooth device.
- Al dispositiu compatible amb Bluetooth (per exemple, un telèfon intel·ligent o una tauleta), cerqueu els dispositius Bluetooth disponibles.
- Selecciona "EE2927" from the list of found devices to connect and link.
Nota: After a successful connection, you can control the audio playback and volume either directly from the earphone's controls or through the relevant controls on your Bluetooth-compatible device.
Manteniment
Un manteniment adequat garanteix la longevitat i el rendiment dels teus auriculars.
- Neteja: Use a soft, dry cloth to wipe the earphones. Do not use abrasive cleaners or immerse them in water.
- Emmagatzematge: Quan no els utilitzeu, guardeu els auriculars en un lloc fresc i sec, allunyats de la llum solar directa i de temperatures extremes.
- Cura del cable: Avoid sharp bends or excessive pulling on the charging cable to prevent damage.
- Resistència a l'aigua: Aquests auriculars són no impermeable. Avoid exposure to liquids.
Resolució de problemes
If you encounter issues with your Pulsar earphones, refer to the following common problems and solutions:
- Earphones will not power on:
- Ensure the battery is fully charged. Connect the earphones to a power source and allow them to charge for at least 30 minutes before attempting to power on again.
- No es pot emparellar amb un dispositiu Bluetooth:
- Ensure the earphones are in pairing mode (LED flashing blue and orange).
- Make sure Bluetooth is enabled on your device and it is within 10 meters of the earphones.
- Desactiva i activa la funció Bluetooth al dispositiu i, a continuació, intenta cercar de nou.
- If previously paired, try forgetting the device "EE2927" from your device's Bluetooth settings and re-pairing.
- Sense so o volum baix:
- Comproveu els nivells de volum tant dels auriculars com del dispositiu connectat.
- Ensure the earphones are properly paired and connected to your device.
- Try playing audio from a different application or media file.
Especificacions
| Característica | Especificació |
|---|---|
| Nom del model | 0154fc29-d32e-4acf-afab-88630c7efcec |
| Versió Bluetooth | 5.0 |
| abast sense fils | 10 metres |
| Mida del controlador | 10 mm |
| Impedància | 32 ohms |
| Sensibilitat | 105 dB |
| Resposta de freqüència | 20 Hz - 20 kHz |
| Tipus de bateria | Li-po 3.7 V 55 mAh |
| Temps de càrrega | Aprox. 2 hores |
| Material | Plàstic |
| Resistència a l'aigua | No impermeable |
| Dispositius compatibles | Phone, Cell phone |
Garantia i Suport
Pulsar products are designed for reliability and performance. For information regarding warranty coverage, technical support, or service inquiries, please refer to the contact information provided with your purchase or visit the official Pulsar weblloc.
Conserveu el vostre comprovant de compra per a reclamacions de garantia.
