Manual d'usuari del provador de bateries de cotxe Veepeak 1220 de 12 V

1. Introducció

The Veepeak 1220 12V Car Battery Tester is a versatile diagnostic tool designed to assess the health of 12V lead-acid batteries and their associated charging and cranking systems. It provides quick and accurate readings for various battery types, helping users determine if a battery is in good condition, needs recharging, or requires replacement. This manual provides detailed instructions for the proper use and maintenance of your Veepeak 1220 Battery Tester.

2. Producte acabatview

Figura 1: Veepeak 1220 12V Car Battery Tester. This image shows the compact red device with its display screen, navigation buttons (ESC, OK, up, down), and attached red and black battery clamps.

2.1 Què hi ha a la caixa

• Battery tester with clamps and cord
• Manual d'usuari (aquest document)

2.2 Característiques clau

• Comprovació de l'estat de la bateria: Scans and displays the overall status of a 12V auto battery, including State of Charge (SOC), State of Health (SOH), voltage, internal resistance, and Cold Cranking Amps (CCA).
• Alternator & Starting System Tester: Reads ripple, loaded, and unloaded voltage to assess alternator performance and checks cranking voltage and time for starting capability.
• Plug and Play & High Accuracy: Tests batteries (even dead ones) in-vehicle or out-of-vehicle with high accuracy (close to 0.01V with overall accuracy close to 99.9%).
• Àmplia compatibilitat: Compatible with all 12V lead-acid batteries from 100 to 2000 CCA (Regular Flooded, AGM Flat Plate, AGM Spiral, GEL, EFB).
• Característiques de seguretat: Includes polarity reverse protection and is spark-proof with no heat connection.

3. Configuració

Before using the Veepeak 1220 Battery Tester, ensure the battery terminals are clean and free of corrosion for accurate readings.

1. Identify the positive (+) and negative (-) terminals on the 12V battery.
2. Connecteu el cl vermellamp of the tester to the positive (+) battery terminal.
3. Connecteu el cl negreamp of the tester to the negative (-) battery terminal.
4. The tester will automatically power on once connected. The main menu will appear on the screen.

Nota: The device features polarity reverse protection, meaning it will not be damaged if the clamps are connected incorrectly. However, always strive for correct connection for safety and proper operation.

4. Instruccions de funcionament

Navigate the menu using the Up/Down arrow buttons and confirm selections with the OK button. Use the ESC button to go back to the previous screen.

4.1 Prova de la bateria

This test assesses the overall health of your battery.

Figura 2: Multi-Functional 12V Battery Analyzer. The screen displays options for Battery Test, Cranking Test, and Charging Test.

1. From the Main Menu, select "1. Battery Test" and press OK.
2. Select the appropriate battery type (e.g., Regular Flooded, AGM Flat Plate, AGM Spiral, GEL, EFB) and press OK.
   

   Figura 3: Compatible Battery Types selection screen.

3. Input the Cold Cranking Amps (CCA) rating of your battery. This information is usually found on the battery label. Use the Up/Down arrows to adjust the value and OK to confirm.
4. The tester will perform the test and display the results, including SOH, SOC, internal resistance, and voltage. It will also indicate if the battery is "GOOD BATTERY", "RECHARGE", or "REPLACE".

4.2 Prova d'arrencada

This test evaluates the battery's ability to start the engine.

Figura 4: Cranking Test in progress. The screen shows cranking time and voltage.

1. From the Main Menu, select "2. Cranking Test" and press OK.
2. The screen will prompt "Start Engine".
3. Start the vehicle's engine.
4. The tester will automatically detect the cranking event and display the cranking time and voltage. It will indicate if the cranking is "GOOD" or "LOW".

4.3 Prova del sistema de càrrega

This test checks the alternator and the vehicle's charging system.

Figura 5: Charging System Test screen showing loaded, unloaded voltage, and ripple.

1. From the Main Menu, select "3. Charging Test" and press OK.
2. The screen will prompt for a "Ripple Test". Press OK.
3. The screen will then prompt "Increase RPM to 2500 R/min and keep it 5 seconds. Press OK to continue."
4. With the engine running, increase the engine RPM to approximately 2500 for 5 seconds. It is recommended to have a second person assist with this step.
5. Press OK. The tester will display the loaded voltage, descarregat voltage, and ripple. It will indicate if the charging is "HIGH", "NORMAL", or "LOW".

5. Manteniment

• Keep the tester clean and dry. Wipe it with a soft, damp tela si cal.
• Guardeu el provador en un lloc fresc i sec, allunyat de la llum solar directa i de temperatures extremes.
• Regularly inspect the cables and clampsi hi ha signes de danys o desgast. Substituïu-los si cal.
• Ensure the battery terminals are clean before testing to prevent inaccurate readings.

6. Solució De Problemes

7. Especificacions

• Dimensions del producte: 5.06 x 2.85 x 0.87 polzades
• Pes de l'article: 10.23 unces
• Font d'alimentació: Battery Powered (from tested battery)
• Min. Vol. Operatiutage: 12 Volts
• Interval CCA: 100-2000 CCA
• Tipus de bateries compatibles: Regular Flooded, AGM Flat Plate, AGM Spiral, GEL, EFB
• Fabricant: Veepeak

8. Garantia i assistència

The Veepeak 1220 12V Car Battery Tester comes with a one-year hassle-free replacement warranty.

For technical support, troubleshooting assistance, or warranty claims, please contact Veepeak customer service through their official weblloc web o el venedor on es va comprar el producte.

Si us plau, conserveu el comprovant de compra per motius de garantia.