ID-COOLING IS-47-XT Low Profile Manual d'usuari del refrigerador de CPU

Introducció

The ID-COOLING IS-47-XT is a compact, low-profile CPU cooler designed for systems with limited space, such as Home Theater Personal Computers (HTPCs), Mini-ITX builds, and other Small Form Factor (SFF) cases. With a total height of only 47mm, it provides efficient cooling performance while maintaining excellent compatibility with various components, including RAM modules. This manual provides detailed instructions for installation, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your cooler.

Image: The ID-COOLING IS-47-XT low profile CPU cooler, showcasing el seu disseny compacte.

Producte acabatview

Característiques clau

• Disseny ultracompacte: Only 47mm total height, ideal for HTPCs, ITX, and SFF builds.
• Dissipació de calor eficient: Features a copper base and 4 heat pipes for excellent heat transfer from the CPU.
• Ventilador PWM: Equipped with a 92x92x15mm PWM fan for automatic speed control, low noise operation, and a maximum airflow of 46 CFM.
• Compatibilitat de la memòria RAM: Small size ensures excellent memory compatibility, even on Mini-ITX motherboards.
• Àmplia compatibilitat: Supports Intel LGA1700/1200/1151/1150/1155/1156 sockets. AMD AM5/AM4 sockets require extra brackets (sold separately).
• All-Black Design: Estèticament agradableasing all-black finish.

Components inclosos

The ID-COOLING IS-47-XT package includes the following components:

• Heatsink assembly with integrated 92x92x15mm PWM fan
• Mounting hardware kit for Intel sockets
• Xeringa de pasta tèrmica

Image: All included mounting hardware and thermal paste for the IS-47-XT cooler.

Configuració i instal·lació

Follow these steps carefully to install your ID-COOLING IS-47-XT CPU cooler. Ensure your system is powered off and unplugged before beginning installation.

1. Prepareu la placa base

• Place the appropriate backplate (if required for your socket type) on the rear of the motherboard, aligning the holes with the CPU socket mounting holes.
• Insert the standoffs through the mounting holes from the front side of the motherboard, securing them to the backplate.

2. Aplicar pasta tèrmica

• Clean the surface of your CPU and the cooler's copper base with isopropyl alcohol to remove any dust or residue.
• Apply a small, pea-sized amount of the included thermal paste to the center of the CPU's Integrated Heat Spreader (IHS). Do not spread it; the pressure from the cooler will distribute it evenly.

Image: Diagram illustrating the copper base and heat pipes for efficient heat transfer from the CPU.

3. Mount the Cooler

• Carefully place the IS-47-XT cooler onto the CPU, aligning the mounting holes on the cooler's bracket with the standoffs on the motherboard.
• Secure the cooler using the provided screws. Tighten them in a diagonal pattern (e.g., top-left, bottom-right, top-right, bottom-left) until snug. Do not overtighten.
• Connect the 4-pin PWM fan cable from the cooler to the CPU_FAN header on your motherboard.

Image: The IS-47-XT cooler installed on a motherboard, demonstrating its excellent RAM compatibility due to its compact design.

Orientació de muntatge

The IS-47-XT cooler can be mounted in two different orientations to optimize airflow within your case, depending on your system's configuration. Consider the direction of your case fans to ensure the cooler's fan is assisting the overall airflow.

Image: Illustration showing two possible mounting orientations for the cooler to best fit the system's airflow.

Instruccions de funcionament

Once installed, the ID-COOLING IS-47-XT operates automatically to maintain optimal CPU temperatures.

PWM Fan Control

The 92x92x15mm fan is a Pulse Width Modulation (PWM) fan. This means its speed is automatically controlled by your motherboard based on the CPU's temperature. This dynamic control ensures efficient cooling when needed and quiet operation during lighter loads.

Image: Close-up of the fan, highlighting its design for low-noise operation.

Airflow and Performance

The fan is designed to push air down through the heatsink fins, effectively dissipating heat from the copper base and heat pipes. This strong airflow and air pressure ensure that heat is quickly removed from the CPU, maintaining stable operating temperatures.

Image: Diagram illustrating the strong airflow and air pressure generated by the fan for effective cooling.

Manteniment

Un manteniment regular ajuda a garantir la longevitat i el rendiment òptim del refrigerador de la CPU.

Neteja de la pols

• Periodically inspect the heatsink fins and fan blades for dust accumulation.
• Use compressed air to blow dust out of the heatsink fins. Hold the fan blades gently to prevent them from spinning excessively during cleaning, which can damage the fan bearings.
• For stubborn dust, a soft brush or cotton swab can be used carefully.

Reaplicació de pasta tèrmica

While modern thermal pastes have a long lifespan, reapplication may be beneficial after several years or if you notice a significant increase in CPU temperatures. This involves carefully removing the cooler, cleaning off old thermal paste from both the CPU and cooler base, and applying new thermal paste before re-mounting.

Resolució de problemes

If you encounter issues with your ID-COOLING IS-47-XT cooler, refer to the following common problems and solutions.

Temperatures altes de la CPU

• Check Mounting Pressure: Ensure the cooler is securely mounted and evenly tightened. Uneven pressure can lead to poor contact with the CPU.
• Verify Thermal Paste Application: Confirm that thermal paste was applied correctly and is evenly spread between the CPU and cooler base. Reapply if necessary.
• Inspeccioneu el funcionament del ventilador: Ensure the fan is spinning freely and connected to the CPU_FAN header. Check for any obstructions.
• Flux d'aire de la caixa: Poor case ventilation can trap heat. Ensure your PC case has adequate intake and exhaust fans.
• CPU Power Consumption: This cooler is designed for CPUs with lower thermal design power (TDP). For optimal performance, it is recommended for CPUs with a TDP of 65W or lower. CPUs with higher power consumption (e.g., 90W or above) may experience higher temperatures, especially under heavy load.

Soroll del ventilador excessiu

• Acumulació de pols: Clean the fan blades and heatsink fins as described in the Maintenance section.
• Configuració de velocitat del ventilador: Check your motherboard's BIOS/UEFI settings for fan control. Adjust the fan curve to a quieter profile si les temperatures ho permeten.
• Obstruccions: Ensure no cables or other components are touching the fan blades.

Especificacions

Below are the detailed technical specifications for the ID-COOLING IS-47-XT CPU Cooler:

Garantia i Suport

For warranty information and technical support, please contact ID-COOLING directly or refer to their official weblloc web. Conserveu el comprovant de compra per a qualsevol reclamació de garantia.

You can visit the official ID-COOLING store for more information and contact details: ID-COOLING Store