Whadda WSG113 Electronic Dice Solder Kit

1. Introducció

This manual provides detailed instructions for the assembly, operation, and maintenance of the Whadda WSG113 Electronic Dice Solder Kit. This kit is designed to introduce users to basic electronics and soldering techniques by building a functional electronic dice with LED indication. Upon completion, the device will simulate a dice roll, with LEDs lighting up randomly and slowly settling on a final number when a button is released.

2. Instruccions de seguretat

WARNING: This kit involves soldering, which uses high temperatures and can produce fumes. Always follow these safety guidelines:

• Supervisió d'adults: This kit is recommended for ages 18 months - 8 years according to the product page, but due to soldering, adult supervision is highly recommended for younger users. Soldering requires precision and handling of hot tools.
• Ventilació: Treballeu en una zona ben ventilada per evitar inhalar els fums de la soldadura.
• Protecció ocular: Always wear safety glasses to protect your eyes from solder splashes or flying component leads.
• Superfícies calentes: Soldering irons become extremely hot. Avoid touching the tip and allow components to cool before handling.
• Seguretat contra incendis: Keep flammable materials away from your soldering workstation. Have a fire extinguisher or water nearby.
• Seguretat elèctrica: Ensure your soldering iron is in good condition and properly grounded. Disconnect power before making adjustments or repairs.
• Soldadura sense plom: If using leaded solder, wash hands thoroughly after handling. Consider using lead-free solder for reduced health risks.

3. Contingut del paquet

Before beginning assembly, verify that all components are present and undamaged. The Whadda WSG113 Electronic Dice Solder Kit typically includes:

• Placa de circuit imprès (PCB)
• Various electronic components (resistors, capacitors, diodes, integrated circuits, LEDs, push button, battery clip)
• Component identification sheet or diagram
• Assembly instructions (this manual serves as a comprehensive guide)

4. Muntatge i muntatge

This section guides you through the process of assembling your electronic dice kit. A basic understanding of soldering is beneficial. If you are new to soldering, it is recommended to practice on scrap components first.

4.1 Eines necessàries (no incloses)

• Soldering iron with a fine tip
• Solder (preferably lead-free)
• Talladors de filferro/talladors enrasats
• Small pliers or tweezers
• Desoldering braid or pump (for corrections)
• Ulleres de seguretat
• 9V battery (for operation)

4.2 Passos de muntatge

1. Identificar els components: Carefully identify all components using the provided diagram or component list. Pay attention to resistor values (color codes), capacitor polarities, and integrated circuit (IC) orientations.
2. Prepare PCB: Ensure the Printed Circuit Board (PCB) is clean and free of debris.
3. Soldadura de baixa intensitatfile Components primer: Start by soldering components that lie flat on the board, such as resistors and diodes. Insert each component, bend the leads slightly to hold it in place, and solder one lead. Check alignment, then solder the second lead. Trim excess leads with flush cutters.
4. Solder Diodes and LEDs: Pay close attention to the polarity of diodes and Light Emitting Diodes (LEDs). The longer lead of an LED is typically the anode (+), and the shorter lead is the cathode (-). Match these to the markings on the PCB.
5. Solder IC Sockets (if included): If the kit includes IC sockets, solder these before inserting the actual ICs. This protects the ICs from heat damage during soldering. Ensure the notch on the socket aligns with the notch marking on the PCB.
6. Condensadors de soldadura: Electrolytic capacitors have polarity. The longer lead is positive (+), and the stripe on the casing indicates the negative (-) lead. Match these to the PCB markings. Ceramic capacitors typically do not have polarity.
7. Solder Integrated Circuits (ICs): If using sockets, carefully insert the ICs into their respective sockets, ensuring the notch on the IC aligns with the notch on the socket and PCB. If soldering directly, align the notch and solder one pin, then check alignment before soldering the rest.
8. Solder Push Button and Battery Clip: Solder the push button and the battery clip wires (red for positive, black for negative) to their designated pads on the PCB.
9. Inspeccioneu les unions de soldadura: After all components are soldered, carefully inspect every solder joint. Look for shiny, cone-shaped joints. Re-solder any dull, lumpy, or bridged joints. Ensure no solder bridges exist between adjacent pads.

5. Instruccions de funcionament

Once your Whadda WSG113 Electronic Dice is fully assembled and inspected, it is ready for operation.

1. Connectar l'alimentació: Attach a 9V battery to the battery clip connected to the circuit board. Ensure correct polarity (red wire to positive, black wire to negative).
2. Activate Dice Roll: Press and hold the push button on the circuit board. You should observe the LEDs lighting up in a rapid, random sequence, simulating a dice roll in progress.
3. Botó d'alliberament: Release the push button. The rapid LED sequence will slow down and eventually settle on a pattern of LEDs representing a number from 1 to 6.
4. Repetiu: To roll the dice again, simply press and release the button.

6. Manteniment

The Whadda WSG113 Electronic Dice Solder Kit requires minimal maintenance to ensure long-term functionality.

• Neteja: Keep the circuit board clean and free of dust. Use a soft, dry brush or compressed air to remove any accumulation. Avoid using liquids directly on the circuit.
• Substitució de la bateria: If the LEDs appear dim or the dice roll function becomes erratic, replace the 9V battery.
• Emmagatzematge: Store the assembled kit in a dry, cool environment, away from direct sunlight and extreme temperatures.
• Manipulació: Handle the circuit board by its edges to avoid touching components or solder joints, which could cause damage or introduce static electricity.

7. Solució De Problemes

If your electronic dice is not functioning as expected, refer to the following troubleshooting guide:

8. Especificacions

9. Informació de la garantia

Specific warranty details for the Whadda WSG113 Electronic Dice Solder Kit are typically provided by the retailer or manufacturer at the time of purchase. As this is a DIY solder kit, warranty coverage may be limited to manufacturing defects of individual components prior to assembly. Damage incurred during the assembly process due to improper soldering or handling is generally not covered.

Please retain your proof of purchase. For detailed warranty terms and conditions, refer to the documentation included with your kit or contact the manufacturer, Velleman Group NV, directly.

10. Suport i contacte

For technical assistance, missing parts, or further inquiries regarding the Whadda WSG113 Electronic Dice Solder Kit, please contact the manufacturer or your point of purchase.

Fabricant: Velleman Group NV

Refer to the official Whadda website or Velleman Group NV's contact page for the most up-to-date support information and contact methods.