1. Introducció
This manual provides essential information for the safe installation, operation, and maintenance of your Philips LED Slim Flood Light, model PTF150-NW-G1-Y-FL-8-BZ. Please read this manual thoroughly before installation and retain it for future reference.
The Philips LED Slim Flood Light is designed for outdoor applications such as sign lighting, building facades, security lighting, and general area illumination. Its robust construction and efficient LED technology ensure reliable performance.
2. Informació de seguretat
WARNING: Risk of electric shock. Installation should be performed by a qualified electrician or trained personnel in accordance with all applicable electrical codes.
- Desconnecteu l'alimentació a l'interruptor automàtic o a la caixa de fusibles abans de la instal·lació o el manteniment.
- Assegureu-vos el subministrament voltage és compatible amb els requisits de l'aparell (120 V CA).
- No feu funcionar l'aparell amb el cablejat o els components danyats.
- Eviteu l'exposició directa dels ulls a la font de llum quan estigui il·luminada.
- The fixture's housing acts as a heat sink and may become hot during operation. Allow adequate cooling time before handling.
- Ensure all connections are secure and properly sealed, especially the IP66 liquid-tight connector for the power cord, to maintain water resistance.
- No modifiqueu l'aparell. Qualsevol modificació pot anul·lar la garantia i crear riscos per a la seguretat.
3. Contingut del paquet
Verifiqueu que tots els components siguin presents abans de començar la instal·lació:
- Philips LED Slim Flood Light (1 unit)
- Integrated Yoke Mount (pre-attached)
- Power Cord (3-foot, STW 16 gauge)
- IP66 Liquid Tight Connector (pre-attached to cord exit)
Imatge 1: Philips LED Slim Flood Light. This image shows the front view of the flood light with its integrated yoke mount and power cord connection point.
4. Especificacions
| Especificació | Detall |
|---|---|
| Número de model | PTF150-NW-G1-Y-FL-8-BZ |
| Marca | Signify (Philips) |
| Wattage | 150 watts |
| Sortida de lumens | 18600 lúmens |
| Temperatura de color | 4000K blanc fred |
| Eficiència | 124 lúmens per watt |
| Voltage | 120 volts (CA) |
| Tipus de muntatge | Yoke Mount (Surface Mount) |
| Acabar | Bronze |
| Material | Die-cast aluminum housing, tempered glass lens |
| Classificació de protecció d'entrada (IP). | IP65 (fixture), IP66 (connector) |
| Pes de l'article | 4 lliures |
| Dimensions (aprox.) | 16.93" H x 11.41" W x 2.36" D (430mm H x 289.8mm W x 59.9mm D) |
5. Configuració i instal·lació
The Philips LED Slim Flood Light is designed for surface mounting using its integrated yoke. Follow these steps for proper installation:
- Preparació: Ensure power is disconnected at the main circuit breaker. Gather necessary tools (drill, screwdriver, wire strippers, electrical tape, mounting hardware suitable for your surface).
- Lloc de muntatge: Select a sturdy surface (wall, pole, ground) capable of supporting the fixture's weight and providing adequate clearance for light distribution.
- Marcatge i perforació: Use the yoke mount as a template to mark the drilling points on the mounting surface. Drill appropriate pilot holes for your chosen mounting hardware. Refer to the dimension diagram for precise measurements.
- Assegureu el dispositiu: Attach the yoke mount securely to the prepared surface using appropriate screws or bolts (not included). Ensure the fixture is stable and cannot vibrate loose. The yoke includes a bolt to lock in the aiming angle after adjustment.
- Connexió elèctrica:
- The fixture comes with a 3-foot watertight STW 16 gauge cord exiting the housing via an IP66 liquid-tight connector.
- Connect the fixture's power cord to your main power supply wiring. This connection must be made by a qualified electrician and comply with all local and national electrical codes.
- Ensure all wire connections are properly insulated and protected from moisture.
- Aiming Adjustment: Loosen the bolt on the yoke mount, adjust the flood light to the desired aiming angle, and then securely tighten the bolt to lock the position.
- Restaura l'alimentació: Un cop finalitzada la instal·lació i totes les connexions siguin segures, restableu l'alimentació a l'interruptor.
Imatge 2: Philips LED Slim Flood Light Dimension Diagram. This diagram provides detailed measurements for the flood light, including height, width, depth, and mounting hole spacing, crucial for accurate installation.
6. Instruccions de funcionament
The Philips LED Slim Flood Light operates upon receiving power. There are no user-adjustable controls on the fixture itself.
- Encès/apagat: Control the light by switching the connected power circuit on or off. This can be done via a wall switch, timer, or photocell (not included).
- Funcionament automàtic: For automated operation, connect the flood light to an external timer, motion sensor, or photocell switch (purchased separately) according to their respective installation instructions.
7. Manteniment
The Philips LED Slim Flood Light is designed for minimal maintenance. Regular inspection and cleaning will ensure optimal performance and longevity.
- Neteja: Netegeu periòdicament la lent i la carcassa amb un drap suau iamp cloth to remove dirt, dust, and debris. Do not use abrasive cleaners or solvents, as these can damage the finish or lens. Ensure power is off before cleaning.
- Inspecció: Annually inspect the fixture for any signs of damage, loose connections, or wear on the power cord. Address any issues promptly.
- Substitució de components: The LED light source is integrated and not user-replaceable. If the fixture malfunctions, contact customer support.
8. Solució De Problemes
If your Philips LED Slim Flood Light is not functioning as expected, refer to the following common issues and solutions:
| Problema | Causa possible | Solució |
|---|---|---|
| La llum no s’encén. | No hi ha energia a l’aparell. Connexió de cablejat solta. Faulty circuit breaker/fuse. | Comproveu la font d'alimentació. Verify all wiring connections are secure (consult a qualified electrician). Reinicieu l'interruptor o substituïu el fusible. |
| La llum parpelleja o és tènue. | Inconsistent power supply. Cablejat solt. Fixture damage. | Assegureu-vos una alimentació estable. Comproveu les connexions del cablejat. If damage is suspected, discontinue use and contact support. |
| Aigua dins de l'aparell. | Improperly sealed connections. Damaged housing/lens. | Immediately disconnect power. Inspect and re-seal all connections, especially the IP66 connector. If housing or lens is damaged, the IP rating may be compromised; contact support. |
Si els passos de resolució de problemes no resolen el problema, poseu-vos en contacte amb l'atenció al client.
9. Garantia i Suport
For warranty information and technical support, please refer to the official Signify (Philips) weblloc web o poseu-vos en contacte amb el seu departament d'atenció al client. Conserveu el rebut de compra com a comprovant de compra.
Fabricant: Significar
Número de model: PTF150-NW-G1-Y-FL-8-BZ
Informació de contacte: Please visit the official Signify weblloc web per obtenir les dades de contacte i els recursos d'assistència més actualitzats.
