1. Introducció
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your IBO Magi 2 25-60/180 High-Efficiency Circulation Pump. Please read these instructions carefully before installation and use, and keep them for future reference.
2. Producte acabatview
The IBO Magi 2 25-60/180 is a high-efficiency centrifugal circulation pump designed for various heating and circulation systems. It features a permanent magnet motor and a differential pressure regulator that automatically and continuously adjusts the pump's power to meet the system's actual demands. The control panel is conveniently located on top of the motor, displaying current power consumption for easy monitoring.
The MAGI series circulation pump is ideally suited for the following systems:
- Sistemes de calefacció a temperatura constant amb cabal variable.
- Sistemes de calefacció amb temperatura variable de les canonades.
- Sistemes de calefacció amb mode nocturn.
- Sistemes d'aire condicionat.
- Sistemes de circulació industrial.
- Sistemes de calefacció central i aigua calenta sanitària.
Figura 2.1: General view of the IBO Magi 2 25-60/180 Circulation Pump.
3. Components inclosos
En desembalar, assegureu-vos que hi hagi tots els components següents:
- IBO Magi 2 25-60/180 Circulation Pump
- Kit de muntatge de cargol
- Juntes
- Cable d'alimentació amb endoll
Figure 3.1: Included screw fittings and gaskets.
Figure 3.2: Power cable with plug.
4. Configuració i instal·lació
Installation should be performed by a qualified professional in accordance with local regulations and safety standards.
4.1. Muntatge de la bomba
- Ensure the system is depressurized and drained before installation.
- Munteu la bomba en posició horitzontal amb l'eix del motor horitzontal.
- Use the provided screw fittings and gaskets to connect the pump to the piping system. Ensure a watertight seal.
- Observe the flow direction indicated by the arrow on the pump housing.
4.2. Connexió elèctrica
- Connect the provided power cable to the pump's electrical terminal.
- Assegureu-vos que la font d'alimentació coincideixi amb el volum nominal de la bombatage (230 V/50 Hz).
- Plug the power cable into a suitable grounded electrical outlet.
- Verify all electrical connections are secure and insulated.
5. Modes de funcionament
The IBO MAGI 2 circulation pump offers several operating modes, accessible via the control panel on top of the motor. The current power consumption is displayed on the dial.
Figure 5.1: Control panel displaying operating modes and power consumption.
Available operating modes:
- Mode automàtic: Automatically selects pump parameters based on installation requirements.
- Proportional Pressure Curves: BL1, BL2 (adjusts head proportionally to flow).
- Constant Pressure Curves: HD1, HD2 (maintains a constant differential pressure).
- Constant Speed Characteristics: HS1, HS2, HS3 (operates at a fixed speed).
Refer to the control panel interface for selecting and adjusting these modes according to your system's needs.
6. Manteniment
Regular maintenance ensures optimal performance and extends the lifespan of your circulation pump. Always disconnect the pump from the power supply before performing any maintenance.
6.1. Inspecció General
- Periodically check for any leaks around the pump and connections.
- Inspect the power cable for signs of damage or wear.
- Ensure the pump is free from excessive dirt or debris.
6.2. Neteja
Si cal, netegeu l'exterior de la bomba amb anuncis.amp tela. No utilitzeu netejadors abrasius ni dissolvents.
6.3. System Flushing
Ensure the heating or circulation system is regularly flushed to prevent the buildup of sludge and debris, which can affect pump performance.
7. Solució De Problemes
Abans de contactar amb l'assistència tècnica, review els següents problemes comuns i les seves possibles solucions.
| Problema | Causa possible | Solució |
|---|---|---|
| La bomba no arrenca | Sense font d'alimentació | Check power connection, fuse, and circuit breaker. |
| Pump runs but no flow | Aire al sistema | Bleed the system to remove air. |
| Flux o pressió reduïts | Clogged impeller or piping | Inspect and clean the impeller and system piping. |
| Soroll inusual | Air in the pump or system | Bleed the system. Check for cavitation. |
| Fuga | Loose connections or damaged gaskets | Tighten connections or replace gaskets. |
Si el problema persisteix després d'intentar aquestes solucions, poseu-vos en contacte amb personal de servei qualificat.
8. Especificacions
| Paràmetre | Valor |
|---|---|
| Model | MAGI 2 25-60/180 |
| Voltage | 230 V / 50 Hz |
| Consum d'energia | 5-45 W |
| Caudal màxim | 55 litres per minut |
| Max Head (Height of lift) | 6 metres |
| Pressió màxima de funcionament | 10 bar |
| Temperatura de funcionament | +2 °C / +110 °C |
| Port-to-Port Distance | 180 mm |
| Diàmetre de connexió | 1 1/2" - 1" |
| Índex de protecció | IP44 |
| Dimensions (L x A x A) | 20 x 20 x 15 cm |
| Pes | 2.98 kg |
| Fabricant | PHU Dambat |
9. Informació de la garantia
This product is covered by a manufacturer's warranty. Please refer to the warranty card included with your purchase for specific terms, conditions, and duration. Keep your proof of purchase for any warranty claims.
10. Suport i contacte
For technical assistance, spare parts, or further inquiries, please contact your retailer or the manufacturer directly. Ensure you have your product model number (MAGI 2) and purchase details available when seeking support.
Manufacturer: PHU Dambat
Weblloc: www.dambat.pl
