Introducció
This manual provides detailed instructions for the setup, operation, and maintenance of your FIFINE K040 Wireless Microphone System. Please read this manual thoroughly before use to ensure optimal performance and longevity of the product.
Contingut del paquet
The FIFINE K040 Wireless Microphone System package includes the following items:
- 1 x Portable Metal Receiver
- 2 x Handheld Transmitters (Microphones)
- 1 x 1/4" Output Cable
- 1 x adaptador de corrent
- 2 x Anti-rolling Silicone Rings
- 2 x Windscreens
- Manual d'usuari
Producte acabatview
Receptor
The receiver unit manages the wireless connection and audio output.
Controls del panell frontal:
- Botó d'encendre: Encén o apaga el receptor.
- VOL A Knob: Adjusts the volume for Microphone A.
- VOL B Knob: Adjusts the volume for Microphone B.
- Pantalla LCD: Shows frequency, channel, and signal indicators for both microphones.
Connexions del panell posterior:
- ENTRADA DC: Connecteu aquí l'adaptador de corrent proporcionat.
- ANT-1 / ANT-2: Connect the antennas for signal reception.
- BALANCED-1 (XLR Output for Mic A): Professional audio output for Microphone A.
- BALANCED-2 (XLR Output for Mic B): Professional audio output for Microphone B.
- MIX OUT (1/4" Mix Output): Combined audio output for both microphones.
Handheld Microphones (Transmitters)
The system includes two handheld dynamic microphones.
- Pantalla LCD: Displays current frequency and battery status.
- Botó d'encesa: Turns the microphone on or off.
- Botó SET: Used to change frequencies.
- Compartiment de la bateria: Requires 2 x AA batteries (not included) for each microphone.
Instruccions de configuració
- Install Antennas: Screw the two antennas onto the ANT-1 and ANT-2 connectors on the rear of the receiver. Ensure they are securely attached and positioned vertically for optimal signal reception.
- Power the Receiver: Connect the power adapter to the DC INPUT on the receiver and plug it into a power outlet. Press the POWER button to turn on the receiver.
- Install Batteries in Microphones: Open the battery compartment of each handheld microphone and insert 2 x AA batteries, observing correct polarity.
- Connexió al sistema d'àudio:
- Using 1/4" Mix Output: Connect the provided 1/4" output cable from the MIX OUT port on the receiver to the input of your amplifier, mixer, or PA system. This combines the audio from both microphones into a single output.
- Using XLR Outputs: For separate control of each microphone, connect XLR cables (not included) from BALANCED-1 (Mic A) and BALANCED-2 (Mic B) to individual XLR inputs on your mixer.
- Connecting to TV (via Ampmés viu): If connecting to a TV, ensure your TV's audio output is connected to an audio amplifier, and then connect the FIFINE K040 receiver to the amplifier as described above.
Image: Diagram showing the FIFINE K040 receiver connected to an amplifier using the 1/4" Mix Output cable. 
Image: Diagram illustrating the connection of the FIFINE K040 receiver to an audio mixer using XLR cables for individual microphone outputs. 
Image: Diagram showing how to connect the FIFINE K040 receiver to a TV through an audio ampmés viu. - Micròfons d'encesa: Press and hold the power button on each microphone until the LCD screen illuminates. The microphones should automatically pair with the receiver.
- Ajustar el volum: Use the VOL A and VOL B knobs on the receiver to set the desired output volume for each microphone.
Instruccions de funcionament
Ensure all components are properly connected and powered on before operation.
- Ús del micròfon: Hold the microphone approximately 2-6 inches (5-15 cm) from your mouth for optimal sound pickup. Avoid covering the microphone grille with your hand.
- Control de volum: Adjust the individual volume knobs (VOL A, VOL B) on the receiver to balance the audio levels of each microphone.
- Frequency Selection (If Interference Occurs):
- If you experience interference, you can change the operating frequency of the microphones.
- On the handheld microphone, press the SET button. The frequency on the LCD display will change.
- The receiver will automatically synchronize with the new frequency.
- The system offers 50 selectable UHF frequencies per channel to minimize interference.
- Interval de funcionament: The system provides a line-of-sight range of up to 35 meters (115 feet). Obstacles and other wireless devices may reduce this range.
Manteniment
- Neteja: Wipe the receiver and microphones with a soft, dry cloth. Do not use liquid cleaners or solvents.
- Substitució de la bateria: Replace AA batteries in the microphones when the battery indicator on the microphone's LCD screen shows low power. Always use fresh batteries.
- Emmagatzematge: When not in use for extended periods, remove batteries from the microphones and store the system in a cool, dry place.
- Cura de l'antena: Handle antennas carefully to prevent bending or damage.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| No sound from microphones. |
|
|
| Interferències o electricitat estàtica. |
|
|
| So feble o distorsionat. |
|
|
Especificacions
| Característica | Detall |
|---|---|
| Model | K040 |
| Tipus de freqüència | UHF (50 selectable frequencies per channel) |
| Canals | 2 |
| Tipus de micròfon | Dinàmic de mà |
| Patró polar | Unidireccional |
| Interval d'operació | Up to 35m / 115ft (line of sight) |
| Sortida del receptor | 1/4" Mix Output, 2 x XLR Balanced Outputs |
| Potència del micròfon | 2 x AA batteries (per mic) |
| Alimentació del receptor | Adaptador de corrent continu |
| Material | Metall |
| Ràtio senyal / soroll | 70 dB |
| Impedància | 600 ohms |
| Pes de l'article | 1 quilogram (sistema total) |
| Dimensions del producte | 35 x 27 x 5 cm |
Garantia i Suport
For warranty information and technical support, please refer to the warranty card included with your product or visit the official FIFINE weblloc web. Conserveu el rebut de compra com a comprovant de compra per a reclamacions de garantia.
Fabricant: FIFINE Technology
Importador (Índia): Origin Marketing Pvt Ltd - 9870294946
