1. Introducció i finalview
The Enthuze ENT-TD6000 is a versatile device designed to provide emergency jump-starting for vehicles, inflate tires, and serve as a portable power bank. It also includes integrated LED light functions for various situations.
Les característiques clau inclouen:
- Inflatable Function: Capable of inflating car tires, motorcycle tires, bicycle tires, air mattresses, water toys, and sports balls.
- Car Jump Start: Designed to jump-start 12V vehicle batteries using the included cables.
- Font d'alimentació mòbil: Can charge/power cell phones, tablets, game consoles, cameras, and other digital smart devices.
- LED Light Functions: Features multiple LED light modes for illumination and signaling.
Figure 1: Enthuze ENT-TD6000 Jump Starter and included accessories.
2. Configuració i ús inicial
2.1 Càrrega del dispositiu
Before first use, fully charge the Enthuze ENT-TD6000. Connect the device to a suitable power source using the provided USB-C cable. The display will indicate the charging status. A full charge typically takes approximately 3.5 hours.
2.2 Connecting Jump Start Cables
To prepare for jump-starting, ensure the jump starter is adequately charged. Connect the smart battery clamp to the jump starter's designated port. The device will indicate readiness.
Video 1: Demonstration of connecting the smart battery clamp and jump-starting a vehicle.
3. Instruccions de funcionament
3.1 Arrencada amb salt d'un vehicle
- Assegureu-vos que l'arrencada de salt estigui completament carregada.
- Connecteu la bateria intel·ligent clamp to the jump starter.
- Enganxeu el cl vermell (+).amp al terminal positiu de la bateria del vehicle.
- Enganxeu el cl de negre (-).amp to the negative terminal of the vehicle's battery or a solid, unpainted metal part of the engine block.
- Press the switch button on the jump starter to activate the jump-start function.
- Engegueu el motor del vehicle.
- Un cop el vehicle arrenqui, retireu immediatament el clamps from the vehicle battery, then disconnect the smart battery clamp des de l'arrencada de salt.
This device is suitable for jump-starting vehicles with up to 8.0L gasoline engines and 6.0L diesel engines, including small cars, SUVs, pickup trucks, motorcycles, and boats.
3.2 Ús del compressor d'aire
- Screw the air hose into the designated port on the jump starter.
- Connect the other end of the air hose to the tire valve or the item to be inflated.
- Use the '+' or '-' buttons to set the desired air pressure.
- Press and hold the switch button for 3 seconds to start the inflation process.
- The device will automatically stop when the set pressure is reached.
- Disconnect the air hose from the item and the jump starter.
3.3 Ús com a bateria externa
The Enthuze ENT-TD6000 features USB output ports to charge various electronic devices:
- Sortida USB 1: 5V=3A, 9V=2A, 12V=1.5A
- Sortida USB 2: 5V=2.1A
Connect your device to the appropriate USB port using a compatible charging cable.
3.4 Funcions de la llum LED
The device includes multiple LED light modes:
- Llum estable: Per a il·luminació general.
- Mode SOS: Per senyalització d'emergència.
- Llum estroboscòpica: For attracting attention.
Press the light button to cycle through the different modes.
4. Manteniment
To ensure the longevity and optimal performance of your Enthuze ENT-TD6000, follow these maintenance guidelines:
- Càrrega regular: Recarrega el dispositiu cada 3-6 mesos, fins i tot si no l'utilitzes, per mantenir la bateria en bon estat.
- Emmagatzematge: Store the device in a cool, dry place. The recommended storage temperature should not be lower than -10°C or higher than 50°C. Extreme temperatures can shorten the product's life and damage the built-in battery.
- Neteja: Feu servir un drap suau i sec per netejar l'exterior del dispositiu. No utilitzeu productes químics agressius ni materials abrasius.
- Inspecció del cable: Periodically inspect the jump start cables and air hose for any signs of wear, damage, or corrosion. Replace if necessary.
Figure 2: Product with accessories and important warnings.
5. Solució De Problemes
Consulteu la taula següent per veure els problemes habituals i les seves solucions:
| Missatge d'error | Causa | Solució |
|---|---|---|
| ERROR | Jumper cables connected with reversed polarity to the car battery. | Connecteu la bateria clamps to the correct positive and negative terminals. |
| BAIXA | Bateria del cotxe connectada correctament, però volum de bateriatage is below 9V, and the core temperature is above 0°C/32°F. | BOOST button for 2 seconds to use the forced boost function. |
| FORA ENTRA | High-temperature protection activated, displaying core temperature overheating. | The product activates temperature protection below 50°C/122°F and resumes output when the temperature drops to 45°C/113°F. |
| IN | Low-temperature protection activated. | The product activates temperature protection below -10°C/-4°F and resumes output at 0°C/32°F-37°F. |
| COMENÇA | Buzzer sounding, silence after 30 seconds. | Overcurrent detected, stop starting vehicle, disappear for 30S. |
| COMENÇA | Vehicle start detected more than 5 times within 10 minutes, buzzer sounds buzzer mutes after 30S "START" continues to flash. | Stop starting the vehicle and the safety mode disappears after 10 minutes. |
6. Especificacions
Detailed technical specifications for the Enthuze ENT-TD6000:
| Paràmetre | Valor |
|---|---|
| Nom del producte | Arrancador de salt amb compressor d'aire |
| Model | ENT-TD6000 |
| Mida | 193 x 110 x 53 mm |
| Rang de pressió d'inflació | 0.2-8 bar / 3-120 psi |
| Temperatura de funcionament | Charge: 0°C~45°C, Discharge: -10°C~45°C |
| Temperatura d'emmagatzematge | -10°C~50°C |
| Inflatable Hose Length | 435mm (including air nozzle) |
| Capacitat de la bateria | 41.44 Wh (14.8 V, 2.8 Ah) |
| Soroll de treball | A menys de 80 dB de distància d'1 metre |
| Entrada de càrrega | 5V=3A |
| Temps de càrrega | Unes 3.5 hores |
| Sortida USB 1 | 5V=3A, 9V=2A, 12V=1.5A |
| Sortida USB 2 | 5V=2.1A |
| Air Pressure Sensor Accuracy | ± 1 psi |
| Start Car Voltage | 12 V |
| Start Car Current | 500A (1000A Peak) |
Figure 3: Basic Parameters of the Enthuze ENT-TD6000.
7. Advertiments de seguretat importants
- Do not overcharge the internal battery. Refer to the instruction manual for proper charging procedures.
- Do not smoke, strike a match, or cause a spark in the vicinity of the power pack during operation.
- Carregueu la bateria interna només en una zona ben ventilada.
- Turn off the 12V firing output when the remaining power of the device's battery cell is less than 20%. USB port can output normally.
- Risc de lesions a les persones. No utilitzeu aquest producte si el cable d'alimentació o els cables de la bateria estan danyats d'alguna manera.
- Aquest dispositiu no està dissenyat per utilitzar-lo en una instal·lació de reparació comercial.
- Aquest dispositiu està pensat per ser emmagatzemat a l'interior quan no s'utilitza. Aquest dispositiu no s'ha d'emmagatzemar ni deixar a l'aire lliure quan no estigui en ús.
- Aquest dispositiu està pensat per a un ús temporal a l'aire lliure i s'ha de tenir una precaució raonable quan s'utilitza aquest dispositiu en condicions humides.
8. Garantia i Suport
For warranty information or technical support, please contact Enthuze Automotive Products directly. Keep your purchase receipt as proof of purchase.
