MAIMEIMI GPS Speedometer 85mm

MAIMEIMI GPS Speedometer 85mm Instruction Manual

Model: GPS Speedometer 85mm

1. Producte acabatview

The MAIMEIMI 85mm GPS Speedometer is a versatile digital instrument designed for accurate speed measurement and display in various vehicles, including boats, marine vessels, and cars. It features a TFT screen for clear readability, IP67 waterproof rating, and supports multiple speed units. This manual provides essential information for proper installation, operation, and maintenance of your speedometer.

Davant view of the MAIMEIMI 85mm GPS Speedometer, displaying speed, trip, odometer, battery voltage, and course over ground.

Figura 1: Frontal view of the MAIMEIMI 85mm GPS Speedometer display.

2. Característiques clau

  • TFT Screen Display: Provides clear and detailed information.
  • Vol. Amplitage Compatibilitat: Operates on 9-33V DC power.
  • Classificació impermeable IP67: Designed to withstand water immersion and anti-fogging.
  • Multiple Speed Units: Switchable between km/h, mph, and knots.
  • Visualització completa de dades: Shows Speed Over Ground (SOG), Odometer (ODO), Trip Meter (TRIP), Course Over Ground (COG), and Battery Voltage.
Detailed diagram of the speedometer display, labeling Speed Over Ground (SOG), Trip, Odometer (ODO), Battery Voltage, Course Over Ground (COG), and Orientation Pointer.

Figure 2: Detailed explanation of the speedometer display elements.

3. Contingut del paquet

Verifiqueu que tots els elements siguin presents al paquet:

  • 1 x MAIMEIMI GPS Speedometer
  • 1 x GPS Antenna (3-meter cable length)
  • 1 x manual d'instruccions
Image showing the MAIMEIMI GPS Speedometer, GPS antenna with cable, and a small instruction manual, indicating the package contents.

Figura 3: Contingut inclòs al paquet del producte.

4. Configuració i instal·lació

4.1 Dimensions

Before installation, ensure adequate space for the speedometer. The required mounting hole diameter is 85mm (3 3/8 inches), and the depth behind the panel should be at least 55mm (2 3/16 inches).

Diagram showing the front and back dimensions of the speedometer. The front diameter is 97mm (3.81in) and the back diameter is 85mm (3.35in). The depth is 56mm (2.2in).

Figure 4: Front and rear dimensions of the speedometer.

4.2 Instruccions de muntatge

  1. Prepara el panell: Using an 85mm (3 3/8") hole saw, cut a circular opening in your dashboard or mounting panel. Ensure there is at least 55mm (2 3/16") of clear space behind the panel for the gauge body.
  2. Insert the Gauge: Carefully insert the speedometer into the prepared hole from the front of the panel.
  3. Secure the Gauge: From the rear of the panel, attach and tighten the supplied retaining ring to secure the speedometer in place.
Diagram illustrating the installation steps: A) retaining ring, B) panel with 85mm hole, C) speedometer body, D) speedometer inserted and secured with retaining ring.

Figure 5: Step-by-step installation guide for mounting the speedometer.

4.3 Connexió del cablejat

Connect the speedometer to your vehicle's electrical system as follows:

  • Fil negre: Connectar a terra (-)
  • Fil vermell: Connect to 9-33V DC power supply (+)

Ensure connections are secure and insulated to prevent short circuits.

Wiring diagram showing the black wire connected to ground (-) and the red wire connected to a 9-30V DC power source (+).

Figure 6: Wiring connection diagram for the speedometer.

4.4 Col·locació de l'antena GPS

The GPS antenna is crucial for signal reception. For optimal performance:

  • Mount the GPS antenna in a location with a clear, unobstructed view del cel.
  • Avoid placing the antenna directly under metal objects or inside enclosed compartments that could block satellite signals.
  • The antenna typically comes with 3M double-sided tape for easy mounting.

Upon initial connection, the speedometer may take approximately 30 seconds to acquire a GPS signal. Subsequent signal acquisition will be faster under clear sky conditions.

5. Instruccions de funcionament

5.1 Mostra informació

The TFT screen displays the following information:

  • SOG (Speed Over Ground): Current speed, displayed in km/h, mph, or knots.
  • ODO (Comptaquilòmetres): Total accumulated distance (0-999999km). This value can be adjusted via the back button.
  • TRIP (Trip Meter): Distance traveled for the current trip (0-999.9km). This resets to zero when power is turned off.
  • COG (Ruta sobre el fons): Current direction of travel (Orientation Pointer).
  • Voltage: Real-time vehicle battery voltage (p. ex., 13.2 V).

5.2 Switching Speed Units

The speedometer supports three units of speed measurement: kilometers per hour (km/h), miles per hour (mph), and knots. To switch between these units:

  • Locate the button on the back of the speedometer unit.
  • Press this button to cycle through the available units (km/h, mph, knot). The selected unit will be saved automatically.
Diagram showing the speedometer display with 'No GPS signal' and '0 km/h', and an inset showing the options for km/h, MPH, and knot. An arrow points to a button on the back of the unit labeled 'Unit switching'.

Figure 7: Illustration of how to switch between speed units using the back button.

5.3 Adjusting Odometer (ODO)

The Odometer (ODO) value can be adjusted using the back button. Refer to the detailed instructions in the included physical manual for specific steps on ODO adjustment, as this typically involves a sequence of button presses.

6. Manteniment

The MAIMEIMI GPS Speedometer is designed for durability and minimal maintenance.

  • Protecció impermeable: The unit is IP67 waterproof, meaning it is protected against dust and can withstand immersion in water up to 1 meter for 30 minutes. This ensures normal operation even in wet marine environments.
  • Neteja: Clean the display and housing with a soft, damp cloth. Avoid abrasive cleaners or solvents that could damage the screen or finish.
  • Connexions: Periodically check all electrical connections to ensure they remain secure and free from corrosion.
The MAIMEIMI GPS Speedometer partially submerged in water, with water splashing around it, demonstrating its IP67 waterproof capability.

Figure 8: Demonstration of the speedometer's IP67 waterproof capability.

7. Solució De Problemes

  • "No GPS Signal" Display: If the speedometer shows "No GPS signal," ensure the GPS antenna is properly connected and placed in a location with a clear view of the sky. It may take up to 30 seconds for initial signal acquisition.
  • Display Readability in Sunlight: In very bright, direct sunlight, the TFT display may be challenging to read for some users. This is a characteristic of some display technologies. Consider adjusting the mounting angle or adding a small shade if persistent issues occur.
  • Lectura de velocitat incorrecta: Verify that the GPS antenna is securely connected and receiving a strong signal. Compare the reading with another GPS-enabled device if available.
  • Problemes d'alimentació: Check the wiring connections (red wire to 9-33V DC, black wire to ground) to ensure they are secure and receiving power within the specified voltage gamma.

8. Especificacions

CaracterísticaEspecificació
ModelGPS Speedometer 85mm
Voltage9-33V DC
Diàmetre del forat de muntatge85 mm (3 3/8 polzades)
Profunditat de muntatge55 mm (2 3/16 polzades)
Classificació impermeableIP67
Tipus de visualitzacióTFT Screen Digital
Unitats de velocitatkm/h, mph, nusos
Odometer Range0-999999 km
Trip Meter Range0-999.9 km
MaterialMetall, plàstic
Dimensions del producte (L x A x A)3.8 x 3.8 x 2.2 polzades

9. Garantia i Suport

For warranty information, technical support, or any questions regarding your MAIMEIMI GPS Speedometer, please refer to the contact details provided with your purchase or visit the official MAIMEIMI store online. Keep your purchase receipt for warranty claims.