1. Introducció
Thank you for choosing the Cecotec Pumba 2200 Refresh Automatic Pet Water Fountain. This 2-liter capacity fountain is designed to provide fresh, filtered water for your pets, encouraging them to drink more and stay hydrated. It features a high-performance filter, an internal LED light, a visible water level indicator, and a silent pump for a peaceful home environment. Its cascade design makes drinking comfortable for pets, and the unit is easy to clean and maintain.
2. Instruccions de seguretat importants
- Llegiu atentament totes les instruccions abans d'utilitzar l'aparell.
- Aquest aparell només és per a ús domèstic interior.
- Do not immerse the electrical components (pump, power adapter) in water.
- Desendolleu sempre la font abans de netejar-la o fer-ne el manteniment.
- Ensure the power cord is not damaged and is placed where pets cannot chew on it.
- Mantenir fora de l'abast dels nens.
- Use only original Cecotec replacement parts and accessories.
- Do not operate the fountain without water.
3. Components del producte
Familiarize yourself with the parts of your Cecotec Pumba 2200 Refresh Pet Water Fountain:
- Water Reservoir (Base)
- Water Tray/Lid
- Bomba d'aigua
- Carcassa del filtre
- Cartutx de filtre
- Adaptador d'alimentació
- LED Light (integrated)
- Indicador de nivell d'aigua


4. Instruccions de configuració
Follow these steps to set up your pet water fountain:
- Desembalar: Traieu amb cura tots els components de l'embalatge.
- Components d'esbandida: Wash the water reservoir, water tray, and filter housing with mild soap and water. Rinse thoroughly to remove any residue.
- Preparació del filtre: Soak the new filter cartridge in clean water for 5-10 minutes before first use. This helps remove any carbon dust and ensures proper water flow.
- Instal·lar la bomba: Place the water pump into the designated area in the water reservoir. Ensure the power cord is routed correctly to avoid pinching.
- Instal·leu el filtre: Insert the prepared filter cartridge into the filter housing, then place the housing over the pump.
- Omplir amb aigua: Fill the water reservoir with clean tap water up to the maximum fill line. Do not overfill. The visible water level indicator will help you monitor this.
- Muntar: Place the water tray/lid securely onto the water reservoir.
- Connectar l'alimentació: Plug the power adapter into a wall outlet. The fountain will start operating, and the internal LED light will illuminate.

5. Instruccions de funcionament
Once set up, the Cecotec Pumba 2200 Refresh fountain operates continuously to provide fresh water for your pet.
- Flux d'aigua continu: The fountain's circulation system ensures water is constantly moving and filtered, keeping it fresh and appealing to your pet.
- Nivell d'aigua visible: Regularly check the water level indicator on the front of the fountain. Refill the reservoir when the water level is low to prevent the pump from running dry.
- Llum LED interna: The integrated LED light illuminates the water, making it visible and attractive to pets, especially in low-light conditions. It also helps you monitor the water level at night.
- Funcionament silenciós: The ultra-quiet water pump ensures minimal noise, providing a calm environment for both you and your pet.


6. Manteniment i Neteja
Regular cleaning and maintenance are crucial for the longevity of your fountain and the health of your pet.
6.1. Manteniment diari
- Check the water level and refill as needed.
- Wipe down the exterior of the fountain to remove any dust or pet hair.
6.2. Neteja setmanal
- Desconnectar: Disconnect the power adapter from the wall outlet.
- Desmuntar: Remove the water tray/lid, filter housing, and pump.
- Components nets: Wash all parts (except the pump and adapter) with warm water and mild soap. Use a brush to clean any hard-to-reach areas. Rinse thoroughly.
- Neteja la bomba: Disassemble the pump (if possible, refer to pump-specific instructions) and clean any debris or mineral buildup from the impeller and motor housing. Rinse well.
- Filtre d'esbandida: Rinse the filter cartridge under running water to remove trapped debris. (Note: The filter should be replaced regularly, see 6.3).
- Torneu a muntar: Reassemble the fountain, ensuring all parts are correctly seated.
- Reomplir i reiniciar: Fill with fresh water and plug in the power adapter.
6.3. Substitució del filtre
The high-performance filter should be replaced every 2-4 weeks, or more frequently if you have multiple pets or notice reduced water flow/quality. Refer to the setup instructions for installing a new filter.

7. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| La font no subministra aigua. |
|
|
| La font fa soroll. |
|
|
| El flux d'aigua és feble. |
|
|
8. Especificacions del producte
| Marca | Cecotec |
| Número de model | 09561 |
| Capacitat | 2 litres |
| Color | Negre |
| Material | Plàstic |
| Dimensions del producte (L x A x A) | 25 x 25 x 15 cm |
| Pes de l'article | 970 grams |
| Voltage | 230 Volts |
| Font d'alimentació | Elèctric |
9. Garantia i Suport
Els productes de Cecotec es fabriquen amb estàndards d'alta qualitat. Per obtenir informació sobre la cobertura de la garantia, consulteu la targeta de garantia inclosa amb la vostra compra o visiteu el lloc web oficial de Cecotec. weblloc.
Disponibilitat de peces de recanvi: Les peces de recanvi per a aquest producte estan disponibles durant 10 anys a partir de la data de compra.
For technical support, troubleshooting assistance, or to inquire about spare parts, please contact Cecotec customer service through their official channels.





