Cecotec FreeGo Wash Electric Mop 40W User Manual

1. Introducció

Thank you for choosing the Cecotec FreeGo Wash Electric Mop. This manual provides essential information for the safe and efficient use, maintenance, and troubleshooting of your device. Please read these instructions carefully before first use and keep them for future reference.

Instruccions de seguretat

• Assegureu-vos que la font d'alimentació voltage coincideix amb els requisits del dispositiu.
• No submergiu la unitat principal en aigua o altres líquids.
• Mantingueu el dispositiu allunyat dels nens i de les mascotes.
• Use only the original charger and accessories provided by Cecotec.
• Do not use the device to clean flammable or combustible liquids.
• Desconnecteu sempre el dispositiu abans de netejar-lo o fer-ne el manteniment.
• Avoid using foaming detergents, as they can damage the device.

2. Components del producte

Familiarize yourself with the parts of your Cecotec FreeGo Wash Electric Mop:

• Main Unit (Handle, Motor Housing, Battery)
• Jalisco Wet Roller
• Clean Water Tank (420 ml)
• Dirty Water Tank (150 ml)
• Self-Cleaning Base
• Adaptador/carregador de corrent

Figure 2.1: The Cecotec FreeGo Wash Electric Mop, shown with its self-cleaning base and a close-up of the Jalisco wet roller, highlighting its design for efficient floor cleaning.

3. Configuració

3.1 Desembalatge i muntatge

1. Traieu amb cura tots els components de l'embalatge.
2. Fixeu la nansa a la unitat principal fins que encaixi al seu lloc.
3. Ensure the Jalisco wet roller is correctly installed in the mop head.

3.2 Càrrega inicial

Before first use, fully charge the electric mop.

1. Place the mop on its self-cleaning base.
2. Connect the power adapter to the charging port on the base and then to a power outlet.
3. The charging indicator will illuminate. Allow approximately 3-4 hours for a full charge.
4. A full charge provides up to 30 minutes of operating autonomy.

4. Instruccions de funcionament

4.1 Omplir el dipòsit d'aigua neta

1. Traieu el dipòsit d'aigua neta de la unitat principal.
2. Open the tank cap and fill it with clean water. You may add a small amount of non-foaming floor cleaner suitable for electric mops. Do not use foaming detergents.
3. Close the cap securely and reinsert the tank into the mop until it clicks.

Figure 4.1: A user demonstrating the removal of one of the water tanks from the mop for refilling or emptying.

4.2 Starting the Mop and Cleaning Process

1. Press the power button to turn on the mop.
2. The Jalisco wet roller will begin to rotate, and the automatic spray function will dispense water onto the floor.
3. Guide the mop across the floor surface to clean. The 40W power and wet roller effectively tackle stubborn dirt.
4. The mop is designed for deep cleaning and can cover large areas thanks to its battery autonomy.

Figure 4.2: A user demonstrating the ease of use of the Cecotec FreeGo Wash Electric Mop while cleaning a floor.

Figura 4.3: Detall view of the mop's Jalisco wet roller in action, effectively cleaning a liquid spill on a hard floor surface.

4.3 Posició d'aparcament

The mop features a convenient parking position, allowing it to stand upright independently when you need to pause during cleaning.

Figure 4.4: The electric mop shown in its convenient self-standing parking position, allowing for temporary pauses during cleaning.

5. Manteniment

5.1 Buidar el dipòsit d'aigua bruta

The mop has an auto-stop function that activates when the dirty water tank is full. Empty the tank regularly to ensure optimal performance.

1. Apagueu la fregona i retireu el dipòsit d'aigua bruta.
2. Obriu el dipòsit i llenceu l'aigua bruta.
3. Rinse the tank with clean water and dry it thoroughly.
4. Reinsert the tank into the mop.

5.2 Funció d'autoneteja

Utilize the self-cleaning base for convenient roller maintenance.

1. After cleaning, place the mop on its self-cleaning base.
2. Assegureu-vos que hi hagi aigua neta al dipòsit d'aigua neta.
3. Activate the self-cleaning function (refer to your device's specific button for this function). The mop will automatically clean the roller.

Figure 5.1: The electric mop positioned on its dedicated base, ready for the self-cleaning cycle.

5.3 Cleaning the Roller and Filter

For thorough cleaning, the roller can be removed and washed manually. The filter should also be cleaned regularly.

1. Turn off the mop and remove the roller from the mop head.
2. Rinse the roller under running water until clean. Allow it to air dry completely before reinstallation.
3. Remove the filter (cartridge type) and rinse it under water. Ensure it is completely dry before placing it back.

6. Solució De Problemes

If you encounter any issues with your Cecotec FreeGo Wash Electric Mop, please refer to the following common problems and solutions:

Si el problema persisteix després d'intentar aquestes solucions, poseu-vos en contacte amb el servei d'atenció al client de Cecotec.

7. Especificacions

8. Garantia i Suport

Your Cecotec FreeGo Wash Electric Mop is covered by a manufacturer's warranty. Please refer to the warranty card included in your product packaging for specific terms and conditions.

For technical support, spare parts, or any other inquiries, please visit the official Cecotec website or contact their customer service department. Contact information can typically be found on the product packaging or the Cecotec brand store.