WOPET FT50 Automatic Pet Feeder User Manual

1. Introducció

Thank you for choosing the WOPET FT50 Automatic Pet Feeder. This device is designed to provide scheduled and portion-controlled meals for your cats and small to medium-sized dogs, ensuring a consistent and healthy diet. Please read this manual thoroughly before operating the feeder to ensure proper use and maintenance.

Image 1.1: The WOPET FT50 Automatic Pet Feeder, showcasing its design with dual stainless steel bowls and a visual representation of pets being fed.

2. Contingut del paquet

Si us plau, verifiqueu que tots els elements que s'enumeren a continuació estiguin inclosos al vostre paquet:

• 4L Automatic Pet Feeder Unit
• Bol d'alimentació d'acer inoxidable
• Bossa dessecant
• Paper Liner Set
• USB-C Power Adapter and Cable
• Manual d'usuari (aquest document)

3. Producte acabatview

Familiarize yourself with the components of your WOPET FT50 Automatic Pet Feeder.

Image 3.1: The feeder with its top lid open, illustrating the internal food storage compartment. A small cat is visible in the foreground.

Components clau:

• Food Reservoir: Holds up to 4 liters (approximately 17 cups) of dry pet food.
• Panell de control/Pantalla: For setting schedules, time, and recording voice messages.
• Botiga d'alimentació: Where dispensed food exits the feeder.
• Bol d'acer inoxidable: Desmuntable per facilitar la neteja.
• Desiccant Compartment: Located under the lid to keep food fresh.
• Port d'alimentació: USB-C input for external power.
• Compartiment de la bateria: For backup power (3 x D batteries, not included).

4. Instruccions de configuració

4.1 Font d'alimentació

The WOPET FT50 feeder supports dual power modes: USB-C adapter and D-cell batteries.

1. Primary Power (USB-C Adapter): Connect the provided USB-C power adapter to the feeder's power port and plug it into a wall outlet.
2. Backup Power (Batteries): Per a un funcionament ininterromput durant l'apagadatages, install three (3) D-cell batteries (not included) into the battery compartment located at the bottom of the feeder. Ensure correct polarity. The feeder retains settings even if power is lost and restored.

Image 4.1: Visual representation of the dual power supply system, highlighting the USB-C adapter connection and the battery compartment for D-cell batteries.

4.2 Omplir el dipòsit d'aliments

The feeder is designed for dry pet food with a diameter of 2-12mm (0.078-0.47 inches).

1. Obriu la tapa superior de l'alimentador.
2. Pour dry pet food into the reservoir. Do not overfill.
3. Close the lid securely to maintain food freshness and prevent pets from accessing food prematurely.

Imatge 4.2: Un intern view of the feeder's airtight food storage, designed to keep pet food fresh and secure.

4.3 Installing the Desiccant Bag

The desiccant bag helps keep the food fresh and dry.

• Locate the desiccant compartment under the top lid.
• Place the provided desiccant bag into the compartment.
• Replace the desiccant bag every 1-2 months for optimal freshness.

4.4 Assembling the Feeding Bowl

Attach the stainless steel bowl to the base of the feeder.

• Ensure the feeder is placed on a flat, stable surface.
• Align the stainless steel bowl with the food outlet and gently push it into place until secure.

5. Instruccions de funcionament

The control panel allows you to customize feeding schedules and other settings.

5.1 Configuració de l'hora actual

Refer to the feeder's display and buttons to set the current time. Typically, there are dedicated buttons for 'Set', 'Up', and 'Down' to adjust hours and minutes.

5.2 Programació de l'horari d'alimentació

You can program up to 6 meals per day, with 1-8 portions per meal.

1. Press the 'Meal' button (or equivalent) to enter meal programming mode.
2. Use 'Up'/'Down' buttons to set the desired feeding time for Meal 1.
3. Press 'Portion' button (or equivalent) and use 'Up'/'Down' to select the number of portions (1-8) for Meal 1.
4. Repeat steps 2 and 3 for additional meals (up to 6).
5. Confirm settings by pressing the 'Set' button (or equivalent) or waiting for the display to exit programming mode automatically.

Imatge 5.1: Un example of a programmed feeding schedule, demonstrating how to set multiple meals and specific portion sizes throughout the day.

5.3 Recording a Voice Message

Grava un missatge de veu de 10 segons per trucar a la teva mascota a l'hora dels àpats.

1. Press and hold the 'Record' button (often indicated by a microphone icon).
2. Speak clearly into the microphone for up to 10 seconds.
3. Release the 'Record' button to save the message. The message will play automatically during each scheduled feeding.

Image 5.2: A visual representation of the personalized meal call feature, showing a pet responding to a recorded voice message from the feeder.

5.4 Alimentació manual

To dispense a single portion immediately:

• Press the 'Manual Feed' button (often indicated by a food dispensing icon). One portion will be dispensed.
• Press again for additional portions.

6. Manteniment

6.1 Neteja de l'alimentador

Una neteja regular garanteix la higiene i el bon funcionament.

1. Desendolleu l'alimentador i traieu totes les piles.
2. Remove the stainless steel feeding bowl for washing with mild soap and water. Rinse thoroughly and dry completely.
3. Wipe the main unit, especially the food outlet and exterior, with a damp tela. No submergiu la unitat principal a l'aigua.
4. Ensure all parts are completely dry before reassembling and powering on.

6.2 Using Disposable Paper Liners

The feeder includes disposable paper liners to absorb oil from pet food, simplifying bowl cleaning.

• Place a paper liner inside the stainless steel bowl before use.
• After use, dispose of the soiled paper liner and replace it with a new one.

Image 6.1: Comparison showing a bowl with residual oil before using a paper liner, and a clean bowl after the liner has absorbed the oil.

6.3 Substitució de la bossa dessecant

Replace the desiccant bag every 1-2 months to maintain optimal food freshness.

7. Solució De Problemes

8. Especificacions

9. Garantia i Suport

9.1 Informació de la garantia

WOPET products are manufactured to high-quality standards. For specific warranty details, please refer to the warranty card included with your product or visit the official WOPET weblloc web. Conserveu el rebut de compra com a comprovant de compra per a reclamacions de garantia.

9.2 Atenció al client

If you encounter any issues or have questions regarding your WOPET FT50 Automatic Pet Feeder that are not addressed in this manual, please contact WOPET customer support. Contact information can typically be found on the product packaging or the official WOPET weblloc.