TALOYA 42-inch Ceiling Fan with Lights and Remote Control
Model: 9008
Marca: TALOYA
Introducció
Welcome to your new TALOYA 42-inch Ceiling Fan. This manual provides detailed instructions for the safe installation, operation, and maintenance of your fan. Please read all instructions carefully before beginning installation and retain this manual for future reference. Proper installation and use will ensure optimal performance and longevity of your product.
Informació de seguretat
- Seguretat elèctrica: Always disconnect power at the main circuit breaker before attempting any installation, maintenance, or repair. Ensure all wiring connections comply with local electrical codes.
- Requisits de muntatge: The ceiling fan must be mounted to a structurally sound ceiling joist or an outlet box approved for fan support. The mounting structure must be capable of supporting the fan's weight (approximately 9.88 lbs).
- Espai lliure de la fulla: Ensure there is adequate clearance between the fan blades and any obstacles, including walls and furniture. A minimum of 7 feet (2.1 meters) from the floor to the blade is recommended.
- Instal·lació professional: If you are unfamiliar with electrical wiring or installation procedures, it is recommended to consult a qualified electrician.
- Use Only Supplied Parts: Do not use parts from other manufacturers. Use only the parts supplied with this fan.
Contingut del paquet
Verifiqueu que tots els components siguin presents abans de començar la instal·lació:
- Muntatge del motor del ventilador
- Pales de ventilador (3)
- Kit de llum
- Control remot
- Downrod
- Suport de muntatge
- Paquet de maquinari (cargols, volanderes, femelles de cable)
- Manual d'instruccions
Especificacions
| Marca | TALOYA |
| Model | 9008 |
| Mida | 42 polzades |
| Dimensions del producte | 42 cm de llargada x 6 cm d'amplada x 13 cm d'alçada |
| Material | Metall, plàstic |
| Tipus de motor | DC Frequency Conversion Motor |
| Velocitats del ventilador | 6 |
| Nivell de soroll | Below 30 dB (at highest speed) |
| Font de llum | LED (15W front light, 4W 3000K backlight) |
| Temperatura de color (llum frontal) | Selectable 3000K/3500K/4000K/5000K/6500K |
| Voltage | 120 volts (CA) |
| Wattage | 54 watts |
| Brillantor | 1500 lúmens (màx.) |
| Mètode de control | Control remot |
| Tipus de muntatge | Downrod Mount (Semi Flush Mount) |
| Ús interior/exterior | Indoor, Covered Outdoor |
| Característiques especials | Backlight, Multi-speed, Remote Control, Reversible Airflow |
| Pes de l'article | 9.88 lliures |
Configuració i instal·lació
Follow these steps carefully to install your ceiling fan. Ensure power is disconnected at the circuit breaker before starting.
- Llista de verificació prèvia a la instal·lació:
- Desconnecteu l'alimentació a l'interruptor principal.
- Verify that your ceiling junction box is approved for fan support and can hold at least 9.88 lbs.
- Ensure the recommended minimum ceiling height is not less than 8 feet.
- For sloped ceilings, the maximum angle should not exceed 12 degrees.
- Instal·leu el suport de muntatge: Fixeu el suport de muntatge a la caixa de connexions del sostre amb els cargols proporcionats. Assegureu-vos que estigui ben fixat.
- Muntar la vareta de baixada: Attach the downrod to the fan motor assembly. Feed the electrical wires from the fan motor through the downrod.
- Penja el ventilador: Carefully lift the fan assembly and hang it onto the hook provided on the mounting bracket. This will temporarily support the fan while you make electrical connections.
- Connexions de cablejat: Connect the electrical wires from the fan to your household wiring (Live, Neutral, Ground) using the provided wire nuts. Ensure all connections are secure and insulated.
- Instal·leu el dosser: Once wiring is complete, carefully slide the canopy up to the ceiling and secure it to the mounting bracket with screws, covering all wiring.
- Connecteu les aspes del ventilador: Secure the three fan blades to the motor housing. Note that the blades are dual-faced, with one side in pure white and the other in light oak. Choose your preferred aesthetic during installation.
- Instal·lació del kit de llums: Connect the light kit wires to the fan motor assembly and secure the light kit to the bottom of the fan.
- Select Color Temperature (Pre-Installation): Before fully securing the light kit, locate the CCT (Correlated Color Temperature) switch on the light fixture. Select your desired front light color temperature from 3000K, 3500K, 4000K, 5000K, or 6500K. This setting is made once during installation.
- Configuració del control remot: Insert two AAA batteries (not included) into the remote control. The remote is typically pre-paired with the fan.
Image: Fully assembled TALOYA 42-inch ceiling fan with integrated light, installed on a ceiling.
Image: Diagram illustrating two mounting positions (flat and sloped ceiling up to 12 degrees) and the dimensions of the hanger bracket (4.56 inches wide, 3.07 inches deep).
Image: Illustration of the fan's dual-faced blades, showing one side in classic wood color and the other in white. Also displays the fan's overall dimensions: 42-inch diameter, 6-inch downrod, and 13-inch total height.
Image: Close-up showing the internal switch for selecting one of five color temperatures (3000K, 3500K, 4000K, 5000K, 6500K) before installation.
Instruccions de funcionament
Your TALOYA ceiling fan is controlled by the included remote. Ensure the remote has fresh AAA batteries installed.
- Encès/apagat: Press the power button on the remote to turn the fan and light on or off.
- Ajust de velocitat del ventilador: Use the speed buttons on the remote to cycle through 6 fan speeds. Speed 1-3 provides gentle air circulation, while Speed 4-6 offers optimal cooling.
- Control de la llum: Press the light button on the remote to toggle between different light modes: front LED light only, backlight only, or both lights on.
- Reversible Airflow (Summer/Winter Mode):
- Mode d'estiu (flux d'aire descendent): The fan blades rotate counter-clockwise, pushing air downwards to create a cooling breeze.
- Mode hivern (flux d'aire ascendent): The fan blades rotate clockwise, drawing air upwards to circulate warm air trapped near the ceiling.
- Funció de temporitzador: Press the timer button on the remote to set the fan to automatically turn off after a preset duration (e.g., 1, 2, 4, or 8 hours).
Image: Visual representation of the fan's reversible airflow, showing downward airflow for summer cooling and upward airflow for winter heat circulation.
Image: Depiction of the three light modes: Front Light, Backlight, and All Lights, which can be toggled using the remote or a wall switch.
Image: Explains the different fan speed ranges: 1-3 speeds for gentle breeze, 'Natural Wind' for family enjoyment, and 4-6 speeds for optimal summer cooling.
Manteniment
Regular maintenance helps ensure the long-term performance and appearance of your fan.
- Neteja: Per netejar el ventilador, netegeu les superfícies amb un drap suau i sec.amp drap. No utilitzeu productes de neteja abrasius ni dissolvents, ja que poden danyar l'acabat o els components elèctrics.
- Cura de la fulla: Periodically check all blade attachment screws for tightness. Over time, screws may loosen due to fan vibration.
- Font de llum: The LED light source is integrated and designed for long life. It is generally not user-replaceable.
Resolució de problemes
Si teniu problemes amb el ventilador, consulteu els següents problemes i solucions habituals:
| Problema | Causa possible | Solució |
|---|---|---|
| El ventilador no arrenca | No power supply; Loose wiring; Remote control batteries dead or not paired | Check circuit breaker; Verify all wiring connections; Replace remote batteries or re-pair remote. |
| La llum no funciona | Loose wiring to light kit; Incorrect CCT switch setting | Check light kit wiring; Ensure CCT switch is set to a desired color temperature. |
| El comandament a distància no respon | Dead batteries; Remote not paired; Obstruction between remote and receiver | Replace batteries; Re-pair remote (refer to specific pairing instructions if provided); Ensure clear line of sight. |
| El ventilador trontolla | Loose blade screws; Loose mounting bracket; Unbalanced blades | Tighten all blade screws; Ensure mounting bracket is securely fastened; Check for any bent blades or use a balancing kit if necessary. |
| Soroll excessiu | Loose screws; Obstruction; Motor issue | Check and tighten all screws; Remove any obstructions; If noise persists, contact customer support. |
Garantia i Suport
TALOYA is committed to providing quality products. A replacement will be arranged for you based on the original purchasing proof if issues arise. For any questions, concerns, or assistance with your TALOYA ceiling fan, please do not hesitate to contact the TALOYA After-sales service team. They are available to provide quick solutions and support.
