1. Introducció
This manual provides comprehensive instructions for the RunCam 5.8Ghz 4.3-inch FPV Monitor. It covers product features, setup, operation, maintenance, troubleshooting, and technical specifications to ensure optimal performance and user experience. Please read this manual thoroughly before using the device.
2. Informació de seguretat
- No exposeu el dispositiu a temperatures extremes, llum solar directa ni humitat elevada.
- Eviteu deixar caure o sotmetre el dispositiu a forts impactes.
- Feu servir només el cable de càrrega i l'adaptador de corrent proporcionats.
- No intenteu desmuntar ni modificar el dispositiu, ja que això anul·larà la garantia i pot causar danys.
- Mantingueu el dispositiu allunyat de l'aigua i altres líquids.
- Assegureu-vos una ventilació adequada durant el funcionament i la càrrega.
3. Contingut del paquet
Verifiqueu que tots els elements siguin presents al vostre paquet:
- 1 x 4.3 Inch FPV Monitor
- 2 x antena 5.8G
- 1 x cable de càrrega USB
- 1 x XT60 plug charging cable
- 1 x Manual d'usuari
Nota: An AV video in & out cable is not included and must be purchased separately if needed.
4. Producte acabatview
The RunCam 5.8Ghz FPV Monitor is designed for real-time video reception from FPV transmitters. It features a 4.3-inch high-definition IPS screen, a built-in DVR for recording, and a 40-channel 5.8Ghz receiver.
Figura 4.1: Frontal view of the RunCam 5.8Ghz 4.3-inch FPV Monitor with antennas attached, displaying a scenic river landscape.
Característiques principals:
- 5.8Ghz 40-Channel Receiver: Provides real-time video return with low latency.
- Integrated DVR Function: Allows recording of FPV footage directly to a TF card (up to 32GB, Class 10 recommended).
- Pantalla IPS de 4.3 polzades: 800x480 resolution for clear viewing.
- Dual Antenna Reception: Enhances signal stability.
- Auto-Searching: One-click automatic channel search for convenience.
- Bateria incorporada: 3.7V/1200mAh Li-ion polymer battery for portable use.
- Universal USB Charging: Compatible with standard USB power sources.
- Entrada/sortida de vídeo: Supports external video connections.
- Vol. Amplitage Suport: DC 5-23V for flexible power options.
Figure 4.2: Diagram illustrating the key features of the RunCam 5.8G FPV Monitor, including DVR, auto-searching, dual antenna, IPS screen, working time, and low latency.
5. Configuració
5.1 Connectar antenes
Carefully screw the two provided 5.8G antennas onto the RP-SMA male connectors located on the top of the monitor. Ensure they are finger-tight but do not overtighten.
Figura 5.1: lateral view of the FPV monitor showing the RP-SMA male antenna connectors.
5.2 Càrrega de la bateria
Connect the monitor to a USB power source (DC5V/2A recommended) using the supplied USB charging cable. The charging indicator light will show the charging status. A full charge typically takes a few hours.
Alternatively, use the XT60 plug charging cable to connect to a compatible DC 5-23V power source.
5.3 Inserting a TF Card (for DVR Function)
Locate the TF card slot on the side of the monitor. Gently insert a TF card (up to 32GB, Class 10 recommended) until it clicks into place. Ensure the card is inserted in the correct orientation.
Nota: A small tool or fingernail may be required to fully insert or eject the TF card.
6. Instruccions de funcionament
6.1 Engegada/apagada
Manteniu premut el botó Poder button located on the side of the monitor to turn the device on or off.
6.2 Cerca automàtica de canals
With the monitor powered on, press the Cerca button. The monitor will automatically scan through all 40 channels to find the strongest FPV signal. This process may take a few moments.
Figure 6.1: The FPV monitor showing the location of the 'Search' button for automatic channel scanning.
6.3 Manual Channel Selection
If automatic search does not yield the desired result, you can manually select channels:
- Premeu el botó Band+ button to cycle through the available frequency bands.
- Premeu el botó CH+ button to cycle through the channels within the selected band.
6.4 DVR Recording
To record FPV footage, ensure a TF card is inserted (refer to Section 5.3).
- Premeu el botó Rec button once to start recording. A recording indicator will appear on the screen.
- Premeu el botó Rec button again to stop recording. The recorded video will be saved to the TF card.
Figure 6.2: Illustration of the monitor's onboard DVR function, allowing quick recording of FPV footage.
6.5 Video Input and Output
The monitor supports video input and output via the AV port. An AV cable is required (not included).
- Entrada de vídeo: Connect an external video source to the AV IN port to display its content on the monitor.
- Sortida de vídeo: Connect the AV OUT port to an external display or recording device to output the monitor's current video feed.
7. Manteniment
7.1 Neteja
Use a soft, dry cloth to clean the monitor's screen and body. For stubborn smudges, slightly dampRenta el drap amb aigua. Evita utilitzar productes químics agressius o materials abrasius.
7.2 Cura de la bateria
- Per allargar la durada de la bateria, eviteu descarregar-la completament amb freqüència.
- If storing the device for an extended period, charge the battery to approximately 50% and store in a cool, dry place.
- No exposeu la bateria a temperatures extremes de calor o fred.
7.3 Emmagatzematge
When not in use, store the monitor in a protective case or bag to prevent scratches and damage. Remove antennas if necessary for compact storage.
8. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| No image or poor signal quality |
|
|
| El monitor no s'encén |
|
|
| DVR not recording or TF card error |
|
|
| Video output to external display not working (USA specific) |
| If using a standard 3.5mm Audio Video cable (three black rings) in the USA, the wiring for video signal may be different. The first ring coming out of this device is the video signal, but in the USA, the first ring often expects audio. You may need to use an adapter or a custom cable that swaps the video and audio signals (e.g., yellow and white wires) to match the external display's input configuration. |
9. Especificacions
| Característica | Detall |
|---|---|
| Model | RunCam 5.8G FPV Monitor |
| Mida de la pantalla | 4.3 polzades |
| Resolució | 800x480px |
| Relació de visualització | 16:9 |
| Video Time Delay | Menys de 20 ms |
| Ranura per a targetes | TF-Card, Support up to 32G (C10 recommend) |
| Vídeo File Format | AVI |
| Power Supply/Adapter | DC5V/2A (USB interface), Support DC 5-23V |
| Bateria | Built-in 3.7V/1200mAh Li-ion polymer |
| Battery Life (DVR on) | Aproximadament 2.5 hores |
| Battery Life (DVR off) | Aproximadament 3.5 hores |
| Freqüència | 5.8 GHz |
| Nombre de canals | 40 CH |
| Dimensions | 122 mm x 75 mm x 16.5 mm (4.8 polzades x 3 polzades x 0.65 polzades) |
| Weight (not incl. antennas) | 135 g (0.3 lliures) |
| Tecnologia de connectivitat | USB |
| Dispositius compatibles | FPV drone, FPV RC boat, FPV RC car, FPV RC plane |
Figure 9.1: Dimensions and weight of the RunCam FPV Monitor.
10. Informació de la garantia
The RunCam FPV Monitor comes with a standard manufacturer's warranty. Please refer to the warranty card included in your package or visit the official RunCam website for detailed warranty terms and conditions. The warranty typically covers manufacturing defects for a specified period from the date of purchase.
Damage resulting from misuse, unauthorized modification, accident, or improper operation is not covered under warranty.
11. Atenció al client
For technical assistance, troubleshooting not covered in this manual, or warranty claims, please contact RunCam customer support through their official weblloc web o la informació de contacte proporcionada amb el vostre producte.
Official RunCam Weblloc: www.runcam.com
