1. Introducció
This manual provides detailed instructions for the proper use and care of your OLEVS Men's Automatic Chronograph Wrist Watch, Model GJ-OS-G2888+L5522PZ-MH. This timepiece features an automatic mechanical movement, chronograph functions, a date display, and a 24-hour (day/night) indicator. Please read this manual thoroughly to ensure optimal performance and longevity of your watch.
Figure 1: OLEVS Men's Automatic Chronograph Wrist Watch (left) and companion watch.
2. Setup and Initial Winding
Your OLEVS automatic watch is powered by the motion of your wrist. Before initial use or after a period of inactivity, it requires manual winding to build up a power reserve.
- Enrotllament manual: To initiate the movement, gently rotate the crown (located on the right side of the watch case) clockwise approximately 30-40 times while it is in its normal, pushed-in position. This will provide sufficient power to start the watch.
- Portar el rellotge: Once wound, wear the watch regularly. Normal daily activities will keep the mainspring wound and the watch running accurately. If the watch is not worn for an extended period, it will stop and require manual winding again.
3. Instruccions de funcionament
The watch features a crown for time and date adjustments, and two push-buttons for the chronograph function.
3.1 Configuració de l'hora i la data
- Ajust de la data: Estireu suaument la corona cap a fora primer clic position. Turn the crown counterclockwise to adjust the date. Avoid setting the date between 9:00 PM and 3:00 AM, as this is when the date change mechanism is engaged and could be damaged.
- Ajust de l'hora: Estireu la corona cap a la segon clic position. Turn the crown clockwise or counterclockwise to set the hour and minute hands. Continue turning until the correct time is displayed. Ensure the 24-hour indicator (often mistaken for a moon phase) is correctly set for AM/PM. Push the crown back into its normal position to start the watch.
3.2 Ús del cronògraf (rellotge de temps)
La funció de cronògraf permet mesurar el temps transcorregut.
- Inici: Press the button located above the crown to start the chronograph. The chronograph seconds hand will begin to move.
- Atura: Press the same button (above the crown) again to stop the chronograph. The elapsed time will be indicated by the chronograph hands.
- Restablir: Press the button located below the crown to reset the chronograph hands to their zero position.
Figure 2: Multifunctional watch face showing chronograph sub-dials and pushers.
3.3 Luminous Features
The watch hands and hour markers are treated with a luminous material. After exposure to light, they will glow in dark conditions, allowing for time readability.
4. Manteniment i cura
4.1 Resistència a l'aigua
This watch is water-resistant up to 30 meters (98 feet). This rating means it is suitable for daily use, such as hand washing, exposure to rain, and cold water baths. It is no suitable for swimming, diving, or hot water activities (e.g., hot showers, saunas), as steam and temperature changes can compromise the seals.
- Do not operate the crown or push-buttons when the watch is wet or submerged.
- Assegureu-vos que la corona estigui completament empenta després de qualsevol ajust per mantenir la resistència a l'aigua.
Figure 3: Illustration of 30-meter water resistance.
4.2 Neteja
Wipe the watch case and crystal with a soft, dry cloth. For the leather strap, avoid prolonged exposure to water, direct sunlight, and harsh chemicals to prevent damage and discoloration. If the leather strap gets wet, dry it thoroughly with a soft cloth and allow it to air dry naturally.
4.3 Emmagatzematge
When not wearing the watch, store it in a cool, dry place away from direct sunlight and strong magnetic fields. If storing for an extended period, consider using a watch winder to keep the automatic movement running and lubricated.
5. Solució De Problemes
- Mira No Corrent: As an automatic watch, it requires motion to operate. If it has stopped, manually wind it by rotating the crown clockwise 30-40 times. If it still does not run, it may require servicing.
- Data sense canvis: Ensure the time is set correctly, especially the AM/PM cycle. The date typically changes around midnight. If the date is stuck, try manually advancing the time past midnight to see if it engages. Avoid adjusting the date between 9 PM and 3 AM.
- Cronometratge incorrecte: Automatic watches can be affected by strong magnetic fields. Keep the watch away from magnets. If accuracy issues persist, the watch may need regulation by a professional watchmaker.
- El cronògraf no es reinicia a zero: If the chronograph hands do not return precisely to zero, it may indicate a need for adjustment or servicing.
6. Especificacions
| Característica | Especificació |
|---|---|
| Número de model | GJ-OS-G2888+L5522PZ-MH |
| Tipus de moviment | Automatic Mechanical (Self-winding) |
| Tipus de visualització | Analògic |
| Material de la caixa | Acer inoxidable |
| Material de la banda | Cuir |
| Diàmetre de la caixa | 42 mil·límetres |
| Gruix de la caixa | 11 mil·límetres |
| Amplada de banda | 21 mil·límetres |
| Profunditat de resistència a l'aigua | 30 metres (98 peus) |
| Característiques addicionals | Luminous hands/markers, Chronograph, Date display, 24-hour indicator |
7. Garantia i Suport
7.1 Informació de la garantia
This product is covered by a seller warranty. For specific details regarding the warranty period and coverage, please refer to the purchase documentation or contact the seller directly.
7.2 Atenció al client
If you encounter any issues or have questions not covered in this manual, please contact the seller or OLEVS customer support through the platform where the watch was purchased. Provide your model number (GJ-OS-G2888+L5522PZ-MH) and purchase details for efficient assistance.
