Manual d'usuari de la esmoladora angular sense fil WORKPRO de 20 V (model W123017AE)

1. Introducció

This manual provides essential information for the safe operation, setup, maintenance, and troubleshooting of your WORKPRO 20V Brushless Cordless Angle Grinder, Model W123017AE. Please read all instructions carefully before using the tool to ensure proper function and to prevent injury.

Informació general de seguretat

Always wear appropriate personal protective equipment (PPE) including safety glasses, hearing protection, and gloves when operating the angle grinder. Ensure the work area is clear of obstructions and well-lit. Keep bystanders and children away from the operating area. Disconnect the battery pack before making any adjustments, changing accessories, or storing the tool.

2. Què s'inclou

Your WORKPRO 20V Brushless Cordless Angle Grinder kit includes the following components:

• 1 × Cordless Angle Grinder (Brushless)
• 1 × Carregador ràpid
• 1 × 20V 4.0Ah Li-Ion Battery
• 5 × 60 Grit Flap Discs
• 5 × Metal/Stainless Cutting Wheels
• 1 × Metal Safety Wheel Guard
• 1 × Plastic Safety Wheel Guard
• 1 × Spanner Wrench
• 1 × Auxiliary Rubber Handle

The kit provides everything necessary to begin grinding and cutting tasks.

3. Configuració

3.1 Càrrega i instal·lació de la bateria

Before first use, fully charge the 20V 4.0Ah Lithium-Ion battery using the provided fast charger. The charger can replenish the battery in approximately 1-2 hours.

To install the battery, align the battery pack with the base of the grinder and slide it in until it clicks securely into place. To remove, press the battery release button and slide the battery out.

3.2 Fixació de la nansa auxiliar

The auxiliary handle can be attached in three positions for optimal comfort and control. Screw the handle into the desired threaded opening on the grinder head until it is firm.

3.3 Safety Guard Installation

The grinder includes two safety wheel guards: one metal and one plastic. Select the appropriate guard for your task (grinding or cutting). To install, align the guard with the grinder head and secure it using the guard clamping lever. Ensure the guard is positioned to deflect sparks and debris away from you.

3.4 Disc Installation

To install a grinding or cutting disc:

1. Assegureu-vos de treure la bateria.
2. Manteniu premut el botó de bloqueig de l'eix.
3. Use the spanner wrench to loosen and remove the outer flange.
4. Place the desired disc onto the spindle, ensuring it sits flush against the inner flange.
5. Re-attach the outer flange and tighten it firmly with the spanner wrench while holding the spindle lock button.

4. Instruccions de funcionament

4.1 Engegada/apagada

The grinder features a two-step operational switch for safety. To turn on, push the switch forward and then up. To turn off, release the switch.

4.2 Control de velocitat

The tool offers two speed settings (0-2500 RPM and 0-8500 RPM) controlled by a button on the battery housing. Select the appropriate speed for your material and task. Lower speeds are generally used for lighter tasks or when more control is needed, while higher speeds are for aggressive material removal.

4.3 Rectificat i tall

Assegureu-vos sempre que la peça de treball estigui ben subjectaamped. Apply light, consistent pressure to the tool. Allow the disc to do the work; excessive force can lead to kickback or damage to the tool and disc. Maintain a firm grip on the auxiliary handle and main body. For grinding, hold the disc at a slight angle to the workpiece. For cutting, hold the disc perpendicular to the workpiece and make shallow passes.

Tecnologia de motor sense escombretes 4.4

This angle grinder is equipped with a brushless motor, which provides higher efficiency, longer service life, and lower operating noise compared to traditional brushed motors. This technology also contributes to the tool's 8500 RPM maximum speed, suitable for demanding tasks on metal, tiles, and concrete.

4.5 Vídeo del producteview

5. Manteniment

5.1 Neteja

Regularly clean the tool's ventilation openings to prevent overheating. Use a soft brush or compressed air to remove dust and debris. Do not use solvents or harsh chemicals.

5.2 Substitució del disc

Replace worn or damaged discs promptly. Refer to section 3.4 for disc installation instructions. Always use discs rated for the grinder's maximum RPM and appropriate for the material being worked on.

5.3 Emmagatzematge

Store the angle grinder and its accessories in a dry, secure location out of reach of children. Ensure the battery is removed from the tool before storage. For long-term storage, charge the battery partially (around 50%) and recharge every few months to maintain battery health.

6. Solució De Problemes

7. Especificacions

8. Garantia i Suport

WORKPRO products are manufactured to high-quality standards. For warranty information, product support, or service inquiries, please refer to the warranty card included with your product or visit the official WORKPRO weblloc web. Conserveu el rebut de compra com a comprovant de compra per a qualsevol reclamació de garantia.