1. Introducció
Thank you for choosing the Kärcher Battery Wet and Dry Vacuum Cleaner WD 3-18. This versatile appliance is designed for efficient cleaning of both wet and dry dirt, offering cordless flexibility for various applications around your home, garden, and workshop. Please read this instruction manual carefully before initial operation and observe the safety instructions. Keep this manual for future reference.
Image 1.1: The Kärcher WD 3-18 Battery Wet and Dry Vacuum Cleaner shown with its complete set of accessories, including the suction hose, extension tubes, floor nozzle, crevice nozzle, and filter.
2. Instruccions de seguretat
Always observe the following safety precautions to prevent accidents and damage:
- Aquest aparell està dissenyat només per a ús domèstic.
- Do not vacuum flammable or explosive liquids, hot ash, or sharp objects.
- Ensure the battery is correctly inserted and fully charged before use. The battery is sold separately.
- No feu servir l'aparell sense el filtre instal·lat.
- Mantingueu els nens i les persones no autoritzades allunyats de l'aparell durant el funcionament.
- Disconnect the battery before cleaning, maintenance, or when changing accessories.
3. Components inclosos
Your Kärcher WD 3-18 package includes the following items:
- Kärcher Battery Wet and Dry Vacuum Cleaner WD 3-18 unit
- Mànega d'aspiració (2 metres)
- 2 tubs d'aspiració
- Clip-on floor nozzle (wet & dry suction nozzle)
- Boquilla de crepit
- One-piece cartridge filter
- Bossa de filtre polar
Nota: The 18 V Kärcher Battery Power battery and charger are no inclòs i s'han de comprar per separat.
4. Configuració
4.1 Muntatge
- Attach the Castors: Insert the four castors into the designated slots on the base of the vacuum cleaner until they click into place.
- Connect the Suction Hose: Insert the end of the suction hose into the suction connection on the front of the vacuum cleaner until it locks securely. For the blowing function, insert the hose into the blowing connection at the rear.
- Muntar els tubs i la boquilla d'aspiració: Connect the two suction tubes together. Attach the desired nozzle (floor nozzle or crevice nozzle) to the end of the suction tube. Then, connect the assembled tube to the handle of the suction hose.
Imatge 4.1: Frontal view of the Kärcher WD 3-18, illustrating the correct attachment of the suction hose and floor nozzle for operation.
4.2 Filter and Filter Bag Installation
- Open the Container: Release the two locking clips on the side of the vacuum cleaner and lift off the motor head.
- Install Cartridge Filter: Place the one-piece cartridge filter onto the filter cage on the motor head. Ensure it is seated firmly. This filter is suitable for both wet and dry vacuuming.
- Install Fleece Filter Bag (for dry vacuuming): For dry vacuuming, slide the fleece filter bag over the suction connection inside the container. Ensure the opening of the bag is fully secured around the connection.
- Close the Container: Place the motor head back onto the container and secure the locking clips.
4.3 Inserció de la bateria
The WD 3-18 operates with an 18 V Kärcher Battery Power battery (sold separately).
- Assegureu-vos que la bateria estigui carregada.
- Open the battery compartment cover on the top of the motor head.
- Slide the 18 V Kärcher Battery Power battery into the compartment until it clicks into place.
- Tanqueu la tapa del compartiment de la bateria.
Imatge 4.2: Un primer pla view demonstrating the correct method for inserting the 18V Kärcher Battery Power battery into its designated slot on the vacuum cleaner's motor head.
5. Instruccions de funcionament
5.1 Engegada/apagada
Press the power button located on the top of the motor head to switch the vacuum cleaner on or off.
5.2 Aspiració en sec
For dry dirt, ensure the fleece filter bag is installed in addition to the cartridge filter. Use the appropriate nozzle for the surface. The floor nozzle is suitable for larger areas, while the crevice nozzle is ideal for tight spaces like car interiors.
Image 5.1: The crevice nozzle effectively cleaning dry debris from the carpeted interior of a car, highlighting its utility in confined spaces.
5.3 Aspiració humida
The one-piece cartridge filter allows for wet vacuuming without needing to change the filter. Remove the fleece filter bag before wet vacuuming to prevent it from getting soaked. The appliance will automatically switch off when the maximum liquid level is reached in the container.
Image 5.2: An individual demonstrating the wet vacuuming capability of the Kärcher WD 3-18 on a tiled patio, effectively cleaning up liquid spills.
5.4 Funció de bufat
To use the blowing function, detach the suction hose from the front suction connection and insert it into the blowing connection located at the rear of the motor head. This function is useful for removing leaves or loose dirt from surfaces that cannot be vacuumed.
Image 5.3: A user utilizing the blowing function of the Kärcher WD 3-18 to clear light debris from a garden path, showcasing its versatility beyond vacuuming.
6. Manteniment
6.1 Buidat del contenidor
After use, especially after wet vacuuming, empty the container. Release the locking clips, lift off the motor head, and carefully pour out the contents. Clean the container with water if necessary.
6.2 Neteja del filtre de cartutx
Regularly clean the cartridge filter to maintain optimal suction performance. Remove the filter from the motor head and tap out any loose dirt. For thorough cleaning, rinse the filter under running water. Allow it to dry completely before reinstallation.
6.3 Accessoris de neteja
Clean the suction hose, tubes, and nozzles as needed. Remove any blockages and rinse with water. Ensure all parts are dry before storing.
7. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Baixa potència d'aspiració | Filter clogged, container full, hose/nozzle blocked, filter bag full (dry vacuuming) | Clean/replace filter, empty container, clear blockages, replace filter bag |
| L'aparell no s'engega | Battery not inserted correctly, battery discharged, battery faulty | Check battery insertion, charge battery, replace battery |
| Water leaks during wet vacuuming | Container overfilled, seals damaged | Empty container, check and replace seals if necessary |
8. Especificacions
| Característica | Especificació |
|---|---|
| Marca | Kärcher |
| Nom del model | WD 3-18 (1.628-550.0) |
| Característica especial | Wet/Dry, Blowing Function |
| Tipus de filtre | One-piece Cartridge Filter |
| És sense fil? | Yes (18V Battery Power platform, battery sold separately) |
| Capacitat | 17 litres |
| Wattage | 1000 watts |
| Longitud de la mànega | 2 metres |
| Dimensions del producte (L x A x A) | 13.74" x 12.91" x 19.37" |
| Nivell de soroll | 70 decibels |
| Durada de la bateria (aprox.) | 10 minutes (with 2.5 Ah battery) / up to 20 minutes (with 5 Ah battery) |
| Pes de l'article | 11.53 lliures |
| Color | groc |
| Ús interior/exterior | Interior/Exterior |
9. Garantia i Suport
Els productes Kärcher es fabriquen amb estàndards d'alta qualitat i inclouen una garantia del fabricant. Per conèixer els termes i condicions específics de la garantia, consulteu la targeta de garantia inclosa amb el vostre producte o visiteu el lloc web oficial de Kärcher. website. For technical support, spare parts, or service inquiries, please contact Kärcher customer service or visit their official support portal. Keep your purchase receipt as proof of purchase.
Kärcher oficial Weblloc: www.kaercher.com
