SONICAKE Warped Dimension Modulation Guitar Effects Pedal User Manual

1. Introducció

The SONICAKE Warped Dimension is a versatile modulation guitar effects pedal designed to offer a range of high-quality modulation effects. This pedal combines four classic modulation modes: Chorus, Flanger, Phaser, and Tremolo, providing diverse tonal options for any musical style. It features a dedicated Tap Tempo function for real-time rate control and a specially designed buffer bypass circuit to maintain signal integrity.

Figure 1: SONICAKE Warped Dimension Modulation Guitar Effects Pedal

2. Característiques clau

• 4-in-1 Modulation: Integrates Chorus, Flanger, Phaser, and Tremolo effects into a single pedal.
• Classic Tones: Reproduces legendary modulation effects.
• Toc Tempo: Independent footswitch for real-time rate control.
• Bypass del buffer: Maintains pristine sound quality when the effect is disengaged.
• Construcció duradora: Housed in an aluminum-alloy casing for lightweight durability.

3. Controls i Funcions

Figura 2: Mésview of Pedal Controls

1. Botó selector de mode: Rotates to select one of the four modulation effects: Chorus, Flanger, Phaser, or Tremolo.
2. Entrada DC 9V: Connects to a 9V DC center-negative power supply (not included).
3. Jack d'entrada: 1/4-inch audio input for your guitar or other instrument.
4. Control de nivell: Adjusts the overall output volume of the effect.
5. Botó de to: Controls the tone or brightness of the modulated signal.
6. Pom de profunditat: Adjusts the intensity or depth of the selected modulation effect.
7. Rate Knob: Controls the speed of the selected modulation effect. This knob is overridden by the Tap Tempo function when active.
8. Sortida Jack: 1/4-inch audio output to your amplifier or next pedal in the chain.
9. Pedal d'encesa/apagada: Engages or disengages the effect. The LED indicates the effect status (on/off).
10. Interruptor de peu TAP: Used for Tap Tempo. Tap this footswitch two or more times to set the rate of the modulation effect. The LED will blink to indicate the set tempo.

4. Configuració

To set up your SONICAKE Warped Dimension pedal, follow these steps:

1. Connexió d'alimentació: Connect a standard 9V DC center-negative power supply (5.5x2.1mm connector) to the DC 9V input jack (2). Ensure the power supply meets the specified voltage i requisits de polaritat.
2. Connexió de l'instrument: Connect your guitar or other instrument to the Input Jack (3) using a standard 1/4-inch instrument cable.
3. Connexió de sortida: Connect the Output Jack (8) to your amplificador o el següent pedal de la cadena de senyals utilitzant un cable d'instrument estàndard de 1/4 de polzada.
4. Encès: Once all connections are secure, apply power to the pedal. The ON/OFF LED (9) will illuminate when the pedal is active.

Figure 3: DC 9V Center Negative Power Connection

5. Modes de funcionament

The pedal offers four distinct modulation modes, selectable via the Mode Selector Knob (1):

• Cor: Produces a rich, shimmering effect by slightly detuning and delaying the original signal.
• Flanger: Creates a sweeping, jet-like sound by mixing a delayed, phase-shifted signal with the original.
• Phaser: Generates a swirling, psychedelic effect by creating phase shifts in the signal.
• Tremolo: Modulates the volume of the signal, creating a pulsating effect.

Figure 4: Modulation Mode Selection

Toqueu Funció Tempo

The Tap Tempo function allows you to set the modulation rate in real-time:

1. Engage the desired modulation effect using the ON/OFF Footswitch (9).
2. Tap the TAP Footswitch (10) two or more times in rhythm with your desired tempo. The LED on the TAP footswitch will blink to indicate the set rate.
3. The Rate Knob (7) will be overridden by the Tap Tempo setting until the pedal is powered off or the rate is manually adjusted again.

Figure 5: Tap Tempo Footswitch

6. Manteniment

Per garantir la longevitat i el rendiment òptim del vostre pedal:

• Keep the pedal clean and free from dust. Use a soft, dry cloth for cleaning.
• Avoid exposing the pedal to extreme temperatures, humidity, or direct sunlight.
• Do not attempt to disassemble or repair the pedal yourself, as this may void the warranty.
• Always use the correct power supply (9V DC center-negative) to prevent damage.

7. Solució De Problemes

• Sense so: Comproveu totes les connexions dels cables (instrument, amplifier, power). Ensure the power supply is correctly connected and functioning. Verify the pedal is engaged (LED on).
• So feble o distorsionat: Comproveu l'instrument i amplifier volume levels. Ensure the Level knob on the pedal is not set too low or too high. Test with different cables.
• Efecte no atractiu: Confirm the power supply is connected and providing power. Press the ON/OFF footswitch firmly.
• Modulation Rate Issues: If using Tap Tempo, ensure you have tapped the footswitch at least twice. If not using Tap Tempo, adjust the Rate knob (7).

8. Especificacions

• Número de model: QDS
• Pes de l'article: 12.7 unces (360 grams)
• Dimensions del producte: 4.88 x 3.54 x 2.16 polzades
• Tipus de connector: 5.5×2.1mm center negative power connector
• Interfície de maquinari: Àudio d'1/4 de polzada
• Format del senyal: Analògic
• Font d'alimentació: Elèctric amb cable
• Voltage: 9 Volts

9. Vídeos de productes

Watch these official product videos for demonstrations and further information:

10. Garantia i Suport

For warranty information or technical support, please refer to the documentation included with your purchase or visit the official SONICAKE weblloc web. Conserveu el comprovant de compra per a qualsevol reclamació de garantia.