Manual d'usuari de la caixa de jocs Antec AX61 Elite Mid-Tower ATX
Model: AX61 Elite
Producte acabatview
The Antec AX61 Elite is a mid-tower ATX gaming case designed for high-performance systems. It features a high-airflow mesh front panel, tempered glass side panels, and comes with four pre-installed 120mm ARGB fans (three in the front and one in the rear) for efficient cooling and customizable lighting. The case supports various motherboard form factors, multiple storage drives, and offers ampl'espai per a la gestió de cables.
Imatge: Anvers view of the Antec AX61 Elite Mid-Tower ATX Gaming Case, showcasing its mesh front panel and four pre-installed ARGB fans with vibrant lighting, along with the tempered glass side panel.
Instruccions de configuració
Follow these steps to set up your Antec AX61 Elite gaming case and install your components.
- Desembalatge: Carefully remove the case from its packaging. Inspect for any damage during transit.
- Extracció del panell lateral: Locate and unscrew the thumb screws on the tempered glass side panel. Gently slide and lift the panel to remove it. Repeat for the solid side panel if necessary for cable management.
- Instal·lació de la placa base: Install the necessary standoffs for your motherboard form factor (ATX, Micro-ATX, ITX). Carefully place your motherboard into the case, aligning it with the standoffs and I/O shield opening. Secure it with screws.
- Instal·lació de la font d'alimentació: Install your power supply unit (PSU) into the bottom mount bay. Secure it with screws from the rear of the case.
- Instal·lació de la unitat d'emmagatzematge:
- For 3.5" HDDs: Install drives into the designated drive cages, typically located near the PSU shroud.
- For 2.5" SSDs: Mount SSDs onto the dedicated SSD trays or mounting points.
- Instal·lació de la targeta gràfica (GPU): Insert your graphics card into the appropriate PCIe slot on your motherboard. Secure it with the provided screws or retention mechanism. The case supports GPUs up to 320mm in length.
- Instal·lació del refrigerador de CPU: Install your CPU cooler. The case supports CPU coolers up to 160mm in height.
- Gestió de cables: Utilize the 24mm depth on the left side and 13mm on the right side behind the motherboard tray for routing and managing cables. This helps maintain optimal airflow and a clean build appearance.
- Fan and ARGB Connections: The case comes with four pre-installed ARGB fans. Connect the fan power cables to your motherboard's fan headers or a fan controller. Connect the ARGB cables to your motherboard's 3-pin 5V ARGB header for synchronized lighting control. If your motherboard does not have an ARGB header, the fans can be controlled via the case's integrated controller (if applicable, typically via a button on the I/O panel).
- Front I/O Connections: Connect the front panel cables (USB 2.0, USB 3.0, Audio, Power, Reset, LED) to their respective headers on your motherboard.
- Assemblea final: Un cop instal·lats tots els components i gestionats els cables, torneu a fixar els panells laterals.
Image: Diagram illustrating the internal layout and component compatibility of the Antec AX61 Elite case, showing locations for motherboard, CPU, GPU, SSDs, HDDs, and power supply, along with maximum dimensions for GPU, CPU cooler, and PSU.
Imatge: Interna view of the Antec AX61 Elite case highlighting the cable management space behind the motherboard tray, indicating 24mm depth on the left side and 13mm on the right side for routing cables.
Instruccions de funcionament
After successful component installation, follow these guidelines for operating your system within the Antec AX61 Elite case.
- Encès: Press the power button on the front I/O panel to start your system.
- Control d'il·luminació ARGB:
- If connected to a motherboard's 3-pin 5V ARGB header, use your motherboard's RGB software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, GIGABYTE RGB Fusion) to customize lighting effects and synchronize with other ARGB components.
- If using the integrated case controller, press the dedicated LED control button on the front I/O panel to cycle through pre-set lighting modes. Holding the reset button for a few seconds may also sync the fan colors with the CPU cooler if connected to the motherboard.
- Flux d'aire i refrigeració: The high-airflow mesh front panel and pre-installed fans are designed for optimal cooling. Ensure no obstructions block the front intake or rear/top exhaust vents.
Imatge: Anglesa view of the Antec AX61 Elite case, emphasizing the high-airflow mesh front panel and the three illuminated ARGB fans, with text indicating efficient cooling through all-round airflow paths.
Image: Diagram showing how the Antec AX61 Elite's ARGB fans can be daisy-chained and connected to a motherboard's ARGB header for synchronized lighting, with an illustration of the front and rear fans connected to the motherboard (MB).
Manteniment
Regular maintenance helps ensure optimal performance and longevity of your PC components within the case.
- Neteja del filtre de pols: The case features dust filters (e.g., on the front and top). Regularly remove and clean these filters to prevent dust buildup inside the case, which can impede airflow and cooling efficiency. Use compressed air or a soft brush.
- Eliminació de pols interna: Periodically open the side panels and use compressed air to gently remove dust from internal components such as CPU cooler fins, GPU heatsinks, and fan blades. Ensure the system is powered off and unplugged before performing this.
- Cura del vidre temperat: Clean the tempered glass side panel with a soft, lint-free cloth and a non-abrasive glass cleaner. Avoid harsh chemicals or abrasive materials that could scratch the glass. Handle the tempered glass with care during removal and reinstallation to prevent accidental damage.
Resolució de problemes
Aquesta secció tracta problemes comuns que podeu trobar.
| Problema | Causa possible | Solució |
|---|---|---|
| El sistema no s'encén. |
|
|
| ARGB fans not lighting up or syncing. |
|
|
| Flux d'aire deficient o temperatures elevades. |
|
|
Especificacions
| Característica | Detall |
|---|---|
| Nom del model | AX61 Elite |
| Tipus de cas | Torre mitja |
| Compatibilitat amb la placa base | ATX, Micro-ATX, ITX |
| Dimensions (LxWxH) | 15.94 x 17.67 x 7.87 polzades |
| Pes de l'article | 10.65 lliures |
| Ventiladors preinstal·lats | 4 x 120mm ARGB Fans (3 Front, 1 Rear) |
| Suport màxim del ventilador | Up to 8 x 120mm fans simultaneously |
| Suport del radiador | Up to 360mm (Front), 240mm (Top), 120mm (Rear) |
| Alçada màxima del refrigerador de la CPU | 160 mm |
| Longitud màxima de la GPU | 320 mm |
| Drive Bays | 2 x 3.5" / 1 x 2.5" (convertible), 2 x 2.5" |
| Ports d'E / S frontals | 2 x USB 2.0, 1 x USB 3.0, HD Audio (Mic & Headphone) |
| Material | Acer, Vidre temperat |
Image: Diagrams illustrating the fan and radiator compatibility of the Antec AX61 Elite case, showing various mounting points for 120mm and 140mm fans, and support for radiators up to 360mm.
Imatge: Interna view of the Antec AX61 Elite case showing the clearance for a CPU cooler, indicating support for coolers up to 160mm in height.
Garantia i Suport
Antec products are designed and manufactured to the highest standards. For warranty information and technical support, please refer to the official Antec weblloc web o contacteu directament amb el servei d'atenció al client. Conserveu el comprovant de compra per a reclamacions de garantia.
Antec Oficial Weblloc: www.antec.com
For specific product support or troubleshooting not covered in this manual, please visit the support section of the Antec webo poseu-vos en contacte amb el seu equip d'assistència tècnica.
