Introducció
Thank you for choosing the Be Cool 121 cm Tower Fan. This manual provides important information regarding the safe operation, assembly, maintenance, and troubleshooting of your new appliance. Please read this manual thoroughly before use and keep it for future reference.

Imatge: Frontal view of the Be Cool 121 cm Tower Fan in white, showcasing its sleek design and tall profile.
Informació important de seguretat
- Assegureu-vos sempre que el ventilador estigui col·locat sobre una superfície estable i plana per evitar que bolqui.
- Do not insert fingers or any objects into the fan grilles.
- Desendolleu el ventilador de la presa de corrent abans de netejar-lo o fer-ne cap manteniment.
- Mantingueu el ventilador allunyat de l'aigua i d'ambients amb molta humitat.
- No feu funcionar el ventilador amb un cable o endoll danyats. Poseu-vos en contacte amb personal de servei qualificat per a la reparació.
- Aquest aparell només és per a ús interior.
Contingut del paquet
Si us plau, comproveu el contingut del paquet en obrir-lo per assegurar-vos que hi hagi tots els elements i que no estiguin danyats:
- Be Cool 121 cm Tower Fan Unit
- Base (two halves)
- Control remot (amb 1 pila CR2430 inclosa)
- Manual d'usuari
- Mounting Screws for Base
Muntatge i muntatge
Follow these steps to assemble your Be Cool Tower Fan:
- Carefully remove all packaging materials from the fan unit and its components.
- Take the two halves of the base and align them. They should snap together or fit snugly.
- Place the main fan unit onto the assembled base, ensuring the alignment tabs or slots match.
- Secure the fan unit to the base using the provided screws. Typically, these are tightened from the underside of the base.
- Col·loqueu el ventilador muntat sobre una superfície ferma i anivellada.
- Insert the CR2430 battery into the remote control if not already pre-installed.
- Plug the power cord into a standard electrical outlet (220V).

Imatge: Lateral view of the Be Cool Tower Fan, illustrating its slim profile and stable circular base.
Instruccions de funcionament
Your Be Cool Tower Fan can be operated using the touch control panel on top of the unit or the included remote control.
Tauler de control i pantalla LED

Image: Close-up of the fan's top control panel, showing the touch buttons for Power, Speed, Timer, Oscillation, and Mode.

Imatge: Detallada view of the fan's LED display, showing temperature, mode icons (Nature, Sleep), and oscillation indicator.
The LED display shows the current room temperature and active settings. The touch-sensitive buttons allow for easy control of all functions.
Control remot

Image: The remote control for the Be Cool Tower Fan, featuring buttons for Power, Speed, Oscillation, Ionizer, Timer, and Mode.
El comandament a distància proporciona un accés còmode a totes les funcions del ventilador des de la distància.
- POTÈNCIA: Encén o apaga el ventilador.
- VELOCITAT: Canvia entre les velocitats del ventilador: Baixa, Mitjana, Alta.
- OSC (Oscil·lació): Activates or deactivates the oscillating function, allowing the fan to rotate from side to side to distribute air.
- ION (Ionizer): Turns the ionizer function On or Off. The ionizer helps to purify the air by releasing ions negatius.
- TEMPORIZADOR: Sets the automatic shut-off timer. Press repeatedly to cycle through 1-hour increments, up to 12 hours.
- Mode: Cycles through different wind modes:
- Mode normal: Flux d'aire constant a la velocitat seleccionada.
- Mode de natura: Simula la brisa natural variant la velocitat del ventilador.
- Mode de repòs: Redueix gradualment la velocitat del ventilador amb el temps per a un funcionament silenciós durant el repòs.
Manteniment
Un manteniment regular garanteix un rendiment òptim i una llarga vida útil del ventilador.
Neteja
- Desconnecteu sempre el ventilador abans de netejar-lo.
- Utilitzeu un suau, damp drap per netejar les superfícies exteriors del ventilador. No utilitzeu productes de neteja abrasius ni dissolvents.
- Use a vacuum cleaner with a brush attachment to gently clean dust from the air inlet and outlet grilles.
- No submergiu el ventilador a l'aigua ni deixeu que l'aigua degoti a la carcassa del motor.
Emmagatzematge
Quan no l'utilitzeu durant períodes prolongats, guardeu el ventilador en un lloc fresc i sec, preferiblement en el seu embalatge original, per protegir-lo de la pols i els danys.
Resolució de problemes
Si teniu problemes amb el ventilador, consulteu els següents problemes i solucions habituals:
| Problema | Causa possible | Solució |
|---|---|---|
| El ventilador no s'encén. | No hi ha font d'alimentació; el cable d'alimentació no està connectat; la presa de corrent està defectuosa. | Ensure the fan is properly plugged into a working electrical outlet. Check the circuit breaker. |
| Flux d'aire feble. | Fan speed set too low; air inlets/outlets blocked by dust. | Increase the fan speed. Clean the air grilles as per maintenance instructions. |
| El ventilador fa un soroll estrany. | Fan not on a stable surface; foreign object inside; internal component issue. | Place the fan on a stable, flat surface. Unplug and check for any obstructions. If noise persists, contact customer support. |
| El comandament a distància no funciona. | Battery depleted or incorrectly inserted; remote out of range. | Replace the battery (CR2430). Ensure the remote is pointed towards the fan's receiver and within range. |
If the problem persists after trying these solutions, please contact Be Cool customer support for assistance.
Especificacions
| Característica | Detall |
|---|---|
| Marca | Sigues genial |
| Número de model | BC121TU2201F |
| Color | Blanc |
| Dimensions (producte) | 31.5 de profunditat x 31.5 d'amplada x 121 d'alçada cm |
| Pes | 3.5 quilos |
| Poder | 45 watts |
| Voltage | 220 V |
| Material | Plàstic |
| Nombre de velocitats | 3 (Baix, Mitjà, Alt) |
| Característiques especials | Ionizer, LED Display, Oscillation, Timer (up to 12h), Remote Control |
| Tipus de controlador | Control remot, panell tàctil |
| Font d'alimentació | Alimentació de xarxa |
Garantia i Suport
Your Be Cool Tower Fan comes with a manufacturer's warranty. Please refer to the warranty card included with your product for specific terms and conditions. For technical support, spare parts, or any inquiries not covered in this manual, please contact Be Cool customer service through their official weblloc web o la informació de contacte que apareix al rebut de compra.





