Producte acabatview
The Shad 3P System side kit is an innovative solution designed to integrate seamlessly with your Honda Rebel CMX 1100. This system focuses on an integrated design, ensuring the side mounting blends well with the motorcycle's aesthetics.
Key features include its lightweight construction, which minimizes impact on the bike's center of gravity, thereby enhancing safety. The system is also noted for its ease of assembly and overall durabilitat i robustness.
This product is 100% designed and manufactured in Barcelona, reflecting a commitment to quality.
Contingut del paquet
Abans de començar la instal·lació, comproveu que tots els components siguin presents al paquet:
- Kits de muntatge
- Conjunt de cargols
- All necessary mounting hardware for the 3P System
If any items are missing or damaged, please contact your retailer or Shad customer support.
Guia d'instal·lació
The Shad 3P System is designed for straightforward installation, typically taking 20 minutes or less for experienced users. Follow these general steps for mounting the side kit:
- Preparació de la motocicleta: Ensure the motorcycle is stable and on a level surface. It is recommended to have the bike on a stand.
- Identificar els punts de muntatge: Locate the designated mounting points on the motorcycle frame, typically near the rear footpegs and under the seat/fender area. Refer to the specific diagrams provided with your physical fitting kit for precise locations.
- Col·loca els suports: Secure the main mounting brackets to the motorcycle frame using the provided screws and fasteners. Ensure all connections are hand-tightened initially.
- Assemble 3P System Frame: Connect the various components of the 3P system frame according to the included instructions.
- Mount 3P System to Brackets: Attach the assembled 3P system frame to the previously installed mounting brackets.
- Ajustament final: Once all components are in place and aligned, progressively tighten all screws and bolts to the manufacturer's specified torque settings. Do not overtighten.
- Comprovar la liquidació: Verify that the installed system does not interfere with any moving parts of the motorcycle, such as the suspension or wheels, and that there is adequate clearance for passenger footpegs if applicable.
Image: The Shad 3P System side kit seamlessly integrated onto a Honda Rebel CMX 1100. This view highlights the low-profile design when no luggage is attached.
Imatge: Un tancador view of the Shad 3P System side kit on the Honda Rebel CMX 1100, illustrating the attachment points and how the system maintains the bike's aesthetic.
Important Note for Rebel 1100 T Models:
For installation on the Honda Rebel 1100 T model, modifications to the support bracket may be necessary. The footpeg position on the 1100 T differs from the standard Rebel 1100. This may require cutting, welding, and repainting the bracket for proper adaptation. It is recommended to consult a professional if you are not comfortable performing these modifications.
Operating the 3P System
The 3P System is designed to be compatible with Shad's range of side cases, such as the SH38X Expandable Side Case and Click System Bags (E03, E09CL PRO, E09CM). These cases feature a convenient Click System for easy attachment and detachment.
To attach a compatible side case:
- Align the mounting points on the side case with the corresponding pins on the 3P System frame.
- Push the case firmly onto the frame until you hear an audible "click," indicating it is securely locked in place.
- Verify the case is firmly attached by gently pulling on it.
To detach a side case:
- Insert the key into the lock mechanism on the side case and turn it to the unlock position.
- Press the release button (if applicable) or pull the release lever.
- Gently lift the side case off the 3P System frame.
Imatge: Un example of a compatible Shad side case (SH38X) that utilizes the 3P System for mounting. Note the expansion feature for increased capacity.
Manteniment
To ensure the longevity and optimal performance of your Shad 3P System, regular maintenance is recommended:
- Neteja: Clean the metal components regularly with a mild soap and water solution. Avoid abrasive cleaners or solvents that could damage the finish.
- Comprovació de fixació: Periodically inspect all screws and bolts for tightness. Vibrations from riding can cause fasteners to loosen over time. Re-tighten as necessary, referring to the original installation instructions for torque specifications if available.
- Prevenció de la corrosió: If riding in wet or corrosive conditions, consider applying a rust-inhibiting spray to exposed metal parts after cleaning and drying.
- Inspeccionar per danys: Regularly check the frame for any signs of bending, cracks, or other damage. If damage is found, discontinue use and contact Shad support for advice.
Resolució de problemes
This section addresses common issues you might encounter with your Shad 3P System.
Issue: Difficulty installing the 3P System on a Honda Rebel 1100 T.
Possible causa: The Honda Rebel 1100 T model has a different footpeg position compared to the standard Rebel 1100, which can cause interference with the 3P System's support bracket.
Solució: Adaptation of the support bracket may be required. This could involve cutting, welding, and repainting the bracket to ensure proper fitment. It is strongly advised to seek assistance from a qualified mechanic or fabrication specialist if you are not equipped or experienced in performing such modifications.
Issue: Side cases feel loose or rattle after installation.
Possible causa: Mounting bolts may not be sufficiently tightened, or the side case is not fully engaged with the Click System.
Solució:
- Re-check all installation bolts and ensure they are tightened to the recommended torque specifications.
- Ensure the side case is pushed firmly onto the 3P System until an audible "click" is heard, indicating it is fully locked.
- Inspect the Click System mechanism on both the case and the 3P System for any obstructions or damage.
Especificacions
| Atribut | Detall |
|---|---|
| Marca | Shad |
| Número de model | H0RB12IF |
| Fabricant | SHAD |
| Pes de l'article | 5.28 lliures (aprox. 2.4 kg) |
| Dimensions del paquet | 23.23 x 15.35 x 4.72 polzades (aprox. 59 x 39 x 12 cm) |
| Compatibilitat | Honda Rebel CMX 1100 (Note: Potential modifications for 1100 T model) |
| Característiques de disseny | Integrated design, lightweight, robust, easy to assemble |
| Origen de la fabricació | 100% designed and manufactured in Barcelona |
Garantia i Suport
For specific warranty information regarding your Shad 3P System, please refer to the documentation provided with your purchase or visit the official Shad weblloc web. Els termes i condicions de la garantia poden variar segons la regió i el distribuïdor.
If you require technical assistance, have questions about installation, or need to report a defect, please contact Shad customer support directly through their official channels. Contact information can typically be found on the manufacturer's weblloc web o a l'embalatge del producte.
