1. Introducció
The AGPTEK Cable Sleeve Cover is designed to organize and protect cables in various environments, including home offices, entertainment centers, and automotive settings. This self-closing sleeve helps to manage unsightly wires, prevent tangling, and offer protection against pets and children. Its durable, flame-retardant material ensures longevity and safety.
2. Informació de seguretat
- Seguretat per a mascotes i nens: The cable sleeve acts as a protective barrier, preventing pets (dogs, cats, rabbits, hamsters, gerbils) and children from chewing or scratching on wires, thereby enhancing household safety.
- Resistència a altes temperatures: Made from flame-retardant material, the sleeve has a temperature range of -50°C to +150°C and a flame protection class of UL94 V-2. It is designed to be robust and flexible without chemical odors.
- Precaució d'instal·lació: When cutting the sleeve, it is recommended to sear the cut edges with a lighter to prevent fraying. Exercise caution during this step.
3. Característiques del producte
- Self-Closing Design: The humanized self-closing design allows for fast bundling, hiding, and tidying up of cables. Cables can be easily inserted and removed as needed.
- Flexible i tallable: The cable tube can be easily cut with scissors to achieve the desired length. The 1.5-inch diameter (25-39mm) accommodates multiple cables, making it suitable for various setups, especially corners.
- Aplicació àmplia: Suitable for use in home offices, computer setups, TV entertainment systems, and even automotive equipment where cable protection and heat dissipation are required.
4. Configuració i instal·lació
Follow these steps to effectively install your AGPTEK Cable Sleeve Cover:
- Recollir cables: Collect all the cables you wish to organize into a single bundle.
- Open Sleeve: Gently open the self-closing sleeve along its length.
- Inserir cables: Carefully insert the bundled cables into the open sleeve. The flexible material will expand to accommodate them.
- Adjust and Position: Once cables are inside, the sleeve will naturally close around them. Adjust the sleeve along the cable run to your desired position.
- Tallar a mida (opcional): If the sleeve is too long, use scissors to cut off the excess.
- Sear Edges (Important): After cutting, use a lighter to quickly sear the cut edges of the sleeve. This prevents fraying and ensures a clean finish. Quickly open the melted edge to prevent sticking.
Vídeo d'instal·lació
Vídeo: This video illustrates the simple process of wrapping cables into the sleeve, cutting excess material, and searing the edges to prevent fraying. It also shows how easily cables can be removed or added.
5. Funcionament
The self-closing design of the AGPTEK Cable Sleeve allows for flexible operation:
- Adding Cables: Gently pull apart the seam of the sleeve at any point along its length and insert additional cables. The sleeve will re-close around the new cables.
- Removing Cables: Similarly, open the sleeve to remove individual cables without disturbing the entire bundle.
- Adjusting Cable Exits: Cables can exit the sleeve at any desired point by gently separating the sleeve's seam.
Operational Demonstration Video
Vídeo: This video showcases the AGPTEK Cable Management Sleeve Cover in various home and office settings, demonstrating its effectiveness in organizing cables for computers, TVs, and other electronic devices.
6. Manteniment
To ensure the longevity and continued effectiveness of your cable sleeve:
- Neteja: Wipe the sleeve with a damp drap per eliminar la pols i la brutícia. Eviteu els productes químics durs.
- Inspecció: Periodically inspect the sleeve for any signs of wear, fraying, or damage. If fraying occurs, re-sear the edges as described in the installation section.
- Eviteu omplir excessivament: Do not overfill the sleeve beyond its capacity, as this may strain the material and reduce its effectiveness.
7. Solució De Problemes
- Els cables no encaixen: Ensure the total diameter of your cable bundle does not exceed the sleeve's maximum capacity (approximately 1.5 inches when closed). Consider using multiple sleeves or a larger diameter sleeve if available.
- Sleeve Fraying: If the cut edges begin to fray, carefully re-sear them with a lighter as instructed in the installation section.
- Sleeve Not Closing Properly: Check if any cables are obstructing the self-closing mechanism. Rearrange cables to allow the sleeve to close securely.
8. Especificacions
| Característica | Detall |
|---|---|
| Dimensions del producte | 120"L x 1.5"W (10 feet length, 1.5 inch diameter) |
| Pes de l'article | 4.2 unces |
| Material | Plastic (Flame-retardant) |
| Color | Negre |
| Interval de temperatura | -50 °C ~ +150 °C |
| Flame Protection Class | UL94 V-2 |
9. Garantia i Suport
Per obtenir informació sobre la garantia o assistència del producte, consulteu el lloc web oficial del fabricant. weblloc web o contacteu directament amb el servei d'atenció al client. Conserveu el rebut de compra per a qualsevol reclamació de garantia.