1. Introducció
Thank you for choosing the Philips Kosipo 4-Light Surface Mounted Spotlight. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new lighting fixture. Please read these instructions carefully before installation and retain them for future reference.
Figura 1: Frontal view of the Philips Kosipo 4-Light Surface Mounted Spotlight.
2. Informació de seguretat
ADVERTIMENT: To avoid electric shock, fire, or injury, always turn off the power at the circuit breaker or fuse box before installation, servicing, or cleaning.
- Ensure the main power supply is disconnected before commencing any work.
- Installation must be performed by a qualified electrician or a person with electrical knowledge.
- Aquest producte està dissenyat només per a ús interior.
- No supereu la potència màximatage especificat per a les bombetes.
- Mantingueu els materials d'embalatge lluny dels nens.
- No modifiqueu l'aparell de cap manera.
3. Contingut del paquet
Verify that all components are present and undamaged before installation:
- Philips Kosipo 4-Light Surface Mounted Spotlight fixture (1 unit)
- Suport de muntatge i maquinari
- Manual d'instruccions
Nota: Les bombetes GU10 són no inclòs i s'han de comprar per separat.
Figure 2: Product packaging, illustrating the included light bar and mounting hardware.
4. Configuració i instal·lació
The Philips Kosipo spotlight features an easy ClickFix installation system.
4.1 Preinstal·lació
- Apagueu l'alimentació: Locate the circuit breaker or fuse box and turn off the power to the area where you will be installing the fixture.
- Preparar eines: You will need a screwdriver, wire strippers, and possibly a drill.
- Desembalar: Carefully remove the fixture and all components from the packaging.
4.2 Mounting the Fixture (ClickFix System)
- Col·loca el suport: Secure the mounting bracket to the ceiling using the provided screws. Ensure it is firmly attached to a joist or suitable ceiling support.
- Connecteu el cablejat: Connect the household electrical wires to the fixture's wires according to local electrical codes. Typically, this involves connecting live to live (black/brown), neutral to neutral (white/blue), and ground to ground (green/yellow).
- Attach the fixture: Once wiring is complete, align the fixture with the mounting bracket and push it into place until it clicks securely. The ClickFix system simplifies this step, allowing for easy, single-person installation.
Figure 3: Visual representation of the easy installation process, showing the fixture being attached to the ceiling bracket.
4.3 Installing GU10 Bulbs
- Ensure power is still off.
- Insert a GU10 bulb into each spotlight socket. Align the two pins of the GU10 bulb with the holes in the socket.
- Push the bulb gently into the socket and twist clockwise until it is secure.
- Repeat for all four spotlights.
Figure 4: The Philips Kosipo spotlight installed and illuminating a wall, demonstrating its lighting effect.
5. Instruccions de funcionament
5.1 Encesa/apagada
Once installed and bulbs are in place, restore power at the circuit breaker. The spotlight can then be operated using your standard wall switch.
5.2 Adjusting the Spotlights
Each of the four spotlight heads is rotatable. You can individually adjust the direction of each light to highlight specific areas or create desired lighting effects in your room.
Figure 5: The Philips Kosipo spotlight providing illumination in a kitchen setting, showcasing el seu disseny funcional.
6. Manteniment
6.1 Neteja
To clean the fixture, ensure the power is off. Use a soft, dry cloth. Do not use abrasive cleaners or solvents, as these may damage the finish.
6.2 Substitució de la bombeta
Always turn off the power before replacing bulbs. Allow bulbs to cool completely before handling. To replace a GU10 bulb, gently push it in and twist counter-clockwise to remove. Insert a new GU10 bulb by aligning the pins, pushing gently, and twisting clockwise until secure.
7. Solució De Problemes
- La llum no s'encén:
- Comproveu si l’interruptor d’encesa està engegat.
- Verifiqueu que l'interruptor automàtic no s'hagi disparat.
- Ensure bulbs are correctly installed and not faulty.
- Check electrical connections for looseness (only by a qualified electrician).
- Llum intermitent:
- Ensure bulbs are fully screwed in.
- Replace the bulb to check if it's faulty.
- Consult a qualified electrician if the issue persists.
8. Especificacions
| Característica | Especificació |
|---|---|
| Marca | Philips |
| Número de model | 46515200 |
| Dimensions del producte | 9.2 x 62.8 x 7 cm (Height x Length x Width) |
| Pes de l'article | 1.47 kg |
| Tipus de llum | LED (compatible) |
| Base del bulb | GU10 |
| Max Wattage (per bombeta) | 5.5 Watts (LED equivalent to 40W incandescent) |
| Característiques especials | Energy efficient, Rotatable heads, Easy ClickFix installation |
| Ús previst | Interior, Llar |
| Color (Fixture) | Blanc |
Figure 6: Technical drawing showing the dimensions of the Philips Kosipo 4-Light Surface Mounted Spotlight.
9. Garantia i Suport
Philips products are designed and manufactured to the highest quality standards. For detailed warranty information and customer support, please refer to the warranty card included with your product or visit the official Philips weblloc.
També podeu trobar ajuda addicional i preguntes freqüents a Botiga Philips a Amazon.
