GOYOJO Density Balance Benchtop Digital Meter Instruction Manual

1. Introducció

This instruction manual provides comprehensive guidance for the safe and efficient operation of the GOYOJO Density Balance Benchtop Digital Meter. This precision instrument is designed for accurate measurement of density for both solid and liquid materials, as well as general weighing applications in laboratory and industrial settings. Please read this manual thoroughly before initial use to ensure proper setup, operation, and maintenance.

2. Informació de seguretat

• Always place the balance on a stable, level, and vibration-free surface.
• Avoid operating the balance in areas with strong air currents, direct sunlight, or extreme temperature fluctuations.
• Ensure the power supply matches the specifications indicated on the adapter. Use only the provided power adapter.
• Do not immerse the balance in water or other liquids. Clean with a soft, damp tela.
• Keep the weighing pan and surrounding area clean and free from debris.
• Do not overload the balance beyond its maximum capacity.
• Només personal qualificat ha de realitzar el manteniment o les reparacions.

3. Contingut del paquet

Verify that all items listed below are present and in good condition upon unpacking:

• GOYOJO Density Balance Main Unit
• Adaptador d'alimentació (6 V CC)
• Density Measurement Kit (includes beaker, solid sample basket/cage, liquid sample holder/sinker, support frame)
• Manual d'usuari

4. Producte acabatview

The GOYOJO Density Balance features a clear digital display and intuitive control buttons for various functions. The integrated density measurement kit allows for precise density determination.

Figura 4.1: Frontal view of the GOYOJO Density Balance with the solid density measurement kit, showing the display and control buttons.

Tauler de control:

• Botó d'encendre: Turns the balance ON/OFF.
• F Button: Function key, often used for unit conversion or menu navigation.
• H/T/+ Button: Hold function, Tare function, or Increment value in settings.
• Botó CAL: Initiates calibration procedure.
• Botó MODE: Switches between weighing modes (e.g., general weighing, solid density, liquid density).

Panell posterior:

• Entrada d'alimentació de 6 V CC: Es connecta a l'adaptador de corrent proporcionat.
• Port RS232: For data communication with external devices (e.g., computer, printer).

Figura 4.2: posterior view of the GOYOJO Density Balance, highlighting the 6V DC power input and RS232 communication port.

5. Configuració

5.1 Desembalatge i col·locació

1. Carefully remove the balance and all accessories from the packaging.
2. Place the balance on a firm, level, and stable workbench or table, away from drafts, vibrations, and direct heat sources.

5.2 Leveling the Balance

For accurate measurements, the balance must be perfectly level.

1. Locate the bubble level indicator, usually found on the front or side of the balance.
2. Adjust the two front adjustable feet (and rear if present) by turning them clockwise or counter-clockwise until the air bubble is centered within the indicator circle.

5.3 Connexió d'alimentació

1. Connect the provided 6V DC power adapter to the power input port on the rear of the balance.
2. Connecteu l'adaptador a una presa de corrent adequada.
3. Premeu el botó PODER button to turn on the balance. The display will perform a self-test and then show "0.000g" or similar.

6. Instruccions de funcionament

6.1 Pesatge bàsic

1. Ensure the balance is level and powered on.
2. If using a container, place it on the weighing pan and press the H/T/+ button to tare (zero) the balance. The display should show "0.000g".
3. Carefully place the item to be weighed onto the center of the weighing pan.
4. Read the stable weight displayed on the screen.

Figure 6.1: The balance set up for basic weighing, with a beaker on the weighing platform.

6.2 Solid Density Measurement

This procedure uses the Archimedes principle to determine the density of solid samples.

1. Assemble the density measurement kit, ensuring the support frame and solid sample basket are correctly positioned over the weighing pan. Place a beaker filled with distilled water (or other suitable liquid) onto the support platform, ensuring the basket is fully submerged without touching the bottom or sides of the beaker.
2. Premeu el botó MODE button repeatedly until the display shows a solid density mode (e.g., "Sol 1d-1" as seen in Figure 4.1).
3. With the empty submerged basket in place, press H/T/+ to tare the balance.
4. Carefully place the solid sample into the submerged basket. The balance will measure the weight of the sample en líquid.
5. Elimina el sample from the basket and dry it. Place the dry sample directly onto the weighing pan (with the density kit still assembled but the sample not submerged). The balance will measure the weight of the sample in air.
6. The balance will automatically calculate and display the density of the solid sample.

6.3 Liquid Density Measurement

This method typically uses a specific gravity sinker or a known volume method.

1. Assemble the density measurement kit with the liquid sample holder/sinker suspended from the balance hook, ensuring it is submerged in a beaker of distilled water (or a liquid of known density) placed on the support platform.
2. Premeu el botó MODE button repeatedly until the display shows a liquid density mode (e.g., "Liq d-1").
3. With the sinker submerged in the reference liquid, press H/T/+ to tare the balance.
4. Replace the reference liquid with the liquid whose density is to be measured, ensuring the sinker is fully submerged.
5. The balance will automatically calculate and display the density of the liquid sample.

Figure 6.2: The balance configured for liquid density measurement, showing a specific gravity sinker immersed in a liquid.

6.4 Calibració

Regular calibration ensures the accuracy of your balance. Refer to the specific calibration weight required for your model.

1. Ensure the balance is stable and empty.
2. Manteniu premut el botó CAL fins que aparegui "CAL" a la pantalla.
3. The display will then show the required calibration weight (e.g., "200.000g").
4. Carefully place the specified calibration weight onto the center of the weighing pan.
5. Wait for the balance to stabilize and complete the calibration process. The display will typically show "PASS" or return to weighing mode.
6. Traieu el pes de calibratge.

7. Manteniment

7.1 Neteja

• Desconnecteu sempre l'adaptador d'alimentació abans de netejar-lo.
• Wipe the exterior of the balance with a soft, damp tela. Es pot utilitzar un detergent suau si cal.
• No utilitzeu netejadors abrasius, dissolvents ni productes químics agressius, ja que poden danyar l'acabat o els components interns.
• Ensure no liquid enters the balance housing or the RS232 port.
• Clean the weighing pan and density kit components thoroughly after each use, especially after contact with corrosive or sticky substances.

7.2 Emmagatzematge

• When not in use for extended periods, store the balance in a dry, dust-free environment.
• Keep the original packaging for safe transport or storage.

8. Solució De Problemes

9. Especificacions

10. Garantia i Suport

GOYOJO stands behind the quality of its products. This product is covered by a Garantia de satisfacció de 30 dies. If you encounter any quality concerns within this period, please contact your retailer or GOYOJO customer support for assistance, including replacements or refunds.

For technical support, troubleshooting assistance, or warranty claims, please refer to the contact information provided by your point of purchase or visit the official GOYOJO weblloc.