Introducció
This manual provides essential instructions for the safe assembly, operation, and maintenance of your Elementi Boulder Gas Fire Pit. Please read all instructions thoroughly before installation and use. Retain this manual for future reference.
Informació important de seguretat
ADVERTIMENT: Failure to follow these instructions could result in fire, explosion, or carbon monoxide poisoning, which could cause property damage, personal injury, or death.
- Always maintain a safe distance from the fire pit.
- Use only the specified fuel type (Natural Gas).
- Assegureu-vos una ventilació adequada.
- Follow all manufacturer instructions for installation, use, and maintenance.
- Keep the fire pit clean and free of debris.
- Tanqueu sempre el subministrament de gas quan no l'utilitzeu.
- Store the fire pit in a dry, well-ventilated area when not in use.
- Do not leave the fire pit unattended while in use.
- This appliance is for outdoor use only. Do not use indoors.
- Mantingueu els nens i les mascotes lluny de la foguera.
Contingut del paquet
Verifiqueu que tots els components siguin presents i no estiguin danyats abans de continuar amb el muntatge.
- Elementi Boulder Gas Fire Pit Unit
- Tapa de lona
- Lava Rock (for burner tray)
- Natural Gas Connection Kit (hose and regulator)

Configuració i instal·lació
- Tria la ubicació: Select a firm, level, non-combustible surface for your fire pit. Ensure adequate clearance from combustible materials (e.g., walls, furniture, overhead structures). This fire pit is designed for outdoor use only.
- Desempaquetar components: Carefully remove all packaging materials. Inspect the fire pit and accessories for any damage.
- Connectar la línia de gas: Connect the natural gas hose from the fire pit to your outdoor natural gas supply line. Ensure all connections are tight and secure. It is recommended to have a qualified professional perform gas line connections.
- Realitzar la prova de fuites: Before first use and after any gas connection, perform a leak test using a soapy water solution. Apply the solution to all gas connections. If bubbles appear, there is a leak. Tighten connections and retest. Do not use the fire pit if a leak is detected.
- Col·loca roques de lava: Distribute the provided lava rocks evenly over the burner pan, ensuring not to block the ignition system or burner ports.


Instruccions de funcionament
- Abans de la il·luminació: Ensure the gas supply valve is open. Check that the burner area is clear of debris.
- Encesa: Locate the control knob on the side of the fire pit. Push the control knob in and turn it counter-clockwise to the 'LIGHT' position. While holding the knob in, press the igniter button repeatedly until the burner ignites.
- Ajust de flama: Once ignited, continue to hold the control knob in for 15-20 seconds to allow the thermocouple to heat up. Release the knob. If the flame extinguishes, repeat the ignition process. To adjust the flame height, rotate the control knob between the 'LOW' and 'HIGH' settings.
- Apagant: To turn off the fire pit, turn the control knob clockwise to the 'OFF' position. Close the main gas supply valve when the fire pit is not in use.


Manteniment
- Neteja: Allow the fire pit to cool completely before cleaning. Wipe exterior surfaces with a soft, damp tela. No utilitzeu netejadors abrasius ni dissolvents.
- Roques de lava: Periodically inspect lava rocks for deterioration. Replace if necessary. Ensure burner ports are clear of debris.
- Cobriment: Use the provided canvas cover to protect the fire pit from weather elements when not in use.
- Inspecció de la línia de gas: Regularly check the gas hose and connections for any signs of wear, cuts, or leaks. Replace damaged components immediately.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| El cremador no s'encén. | Gas supply off, igniter faulty, air in gas line, blocked burner ports. | Check gas supply, ensure igniter sparks, purge air from line, clear burner ports. |
| Flama baixa. | Low gas pressure, partially blocked burner ports, control knob not fully open. | Check gas pressure, clear burner ports, adjust control knob to 'HIGH'. |
| S'ha detectat olor de gas. | Fuita de gas. | Immediately turn off gas supply. Perform leak test. Do not operate until leak is resolved. Contact a qualified technician if necessary. |
Especificacions
- Model: Boulder Gas Fire Pit
- Material: Formigó colat
- Tipus de combustible: Gas Natural
- Dimensions del producte: 43.3 cm (diàmetre) x 16.1 cm (alçada)
- Pes de l'article: 173 lliures
- Potència de calor: 45,000 BTU
- Certificacions: Certificat CSA


Garantia i Suport
For warranty information, technical support, or replacement parts, please contact AMS Fireplace Inc. directly. Refer to your purchase documentation for specific warranty terms and contact details.
Fabricant: Elements
Marca: AMS FIREPLACE INC.
Atenció al client: Please refer to the contact information provided at the time of purchase or visit the official AMS Fireplace Inc. weblloc.





