Absima Micro Crawler PRO 1:18 RC Model Car

1. Introducció

Thank you for choosing the Absima Micro Crawler PRO. This 1:18 scale brushed electric RC model car features 4-wheel drive (4WD) and operates on a 2.4 GHz radio system, designed for off-road crawling and precision driving. This manual provides essential information for the safe operation, setup, maintenance, and troubleshooting of your new RC model.

Please read this manual thoroughly before operating the vehicle to ensure proper function and to maximize your enjoyment.

2. Instruccions de seguretat

• Supervisió d'adults: This product is not a toy. Adult supervision is recommended for users under 14 years of age.
• Seguretat de la bateria: Always use batteries according to manufacturer's instructions. Do not mix old and new batteries, or different types of batteries. Remove batteries when not in use for extended periods.
• Entorn de funcionament: Feu funcionar el vehicle en zones obertes, lluny de persones, mascotes i obstacles. Eviteu fer-lo funcionar a prop d'aigua, fonts de calor o cables elèctrics.
• Parts mòbils: Keep fingers, hair, and loose clothing away from moving parts such as wheels and drivetrain components.
• Vehicle Condition: Before each use, inspect the vehicle for any damage or loose parts. Do not operate if damaged.
• Desmuntatge: Do not attempt to disassemble or modify the vehicle or remote control. This may void your warranty and cause damage.

3. Contingut del paquet

Si us plau, comproveu el contingut del paquet per assegurar-vos que hi hagi tots els elements:

• Absima Micro Crawler PRO 1:18 RC Model Car
• Transmissor de control remot de 2.4 GHz
• USB Charging Cable (for vehicle battery)
• Manual d'instruccions

Note: Vehicle battery and remote control batteries are not included and must be purchased separately.

4. Configuració

4.1. Vehicle Battery Installation and Charging

The Absima Micro Crawler PRO uses a rechargeable LiPo battery (not included). Follow these steps to install and charge the battery:

1. Localitzeu el compartiment de la bateria a la part inferior del vehicle.
2. Obriu la tapa del compartiment de la bateria.
3. Carefully insert the compatible LiPo battery into the compartment, ensuring correct polarity.
4. Connect the battery to the vehicle's power connector.
5. Tanqueu bé la tapa del compartiment de la bateria.
6. To charge the battery, disconnect it from the vehicle and connect it to the provided USB charging cable. Connect the USB cable to a suitable USB power source (e.g., computer USB port, USB wall adapter).
7. Monitor the charging process. The indicator light on the USB charger will typically show red during charging and turn off or green when fully charged.
8. No deixeu mai les bateries carregades sense vigilància.

Figura 1: Absima Micro Crawler PRO 1:18 RC Model Car. This image shows the compact design of the vehicle, highlighting its robust chassis and off-road tires, suitable for micro crawling.

4.2. Instal·lació de la bateria del control remot

The 2.4 GHz remote control transmitter requires 2x AA batteries (not included). Follow these steps:

1. Localitzeu el compartiment de la bateria a la part posterior del comandament a distància.
2. Obriu la tapa del compartiment de la bateria.
3. Insert 2x AA batteries, ensuring correct polarity (+/-).
4. Tanqueu bé la tapa del compartiment de la bateria.

4.3. Pairing the Transmitter and Vehicle

Your Absima Micro Crawler PRO and its transmitter are typically pre-paired from the factory. If re-pairing is necessary, follow these general steps:

1. Ensure both the vehicle battery and transmitter batteries are fully charged and installed.
2. Turn on the transmitter first. The indicator light on the transmitter may flash.
3. Turn on the vehicle. The indicator light on the vehicle's receiver (or ESC) may flash.
4. Wait a few seconds for the transmitter and vehicle to establish a connection. The indicator lights on both devices should become solid, indicating a successful bind.
5. If pairing fails, turn off both devices and repeat the process. Refer to the specific instructions on the vehicle's ESC/receiver for any dedicated bind button or procedure.

5. Funcionament

5.1. Controls bàsics

The 2.4 GHz remote control typically features the following controls:

• Activador de l'accelerador: Estireu per avançar, empenyeu per frenar/retrocedir.
• Volant: Gira a l'esquerra per girar a l'esquerra, gira a la dreta per girar a la dreta.
• Trim Dials: Fine-tune steering and throttle to ensure the vehicle drives straight and stops when the trigger is neutral.
• Interruptor d'alimentació: Encén/apaga el transmissor.

5.2. Driving Tips for Micro Crawlers

• Lent i constant: Micro crawlers excel at slow, precise movements over obstacles. Avoid fast, jerky inputs.
• Control de l'accelerador: Use gentle throttle inputs to maintain traction and navigate challenging terrain.
• Angle de direcció: Utilize the full steering angle to maneuver around tight spots.
• Centre de gravetat: Observe how the vehicle's weight shifts when climbing or descending. Adjust your approach to prevent rollovers.
• Explora: Experiment with different lines and angles to conquer obstacles.

6. Manteniment

6.1. Neteja

• After each use, especially in dusty or dirty conditions, clean the vehicle.
• Feu servir un raspall suau o aire comprimit per eliminar la brutícia i les restes del xassís, la suspensió i la transmissió.
• Wipe down the body with a soft, damp tela. Eviteu utilitzar productes químics aggressivs.
• Ensure all electronic components are dry before storing.

6.2. Emmagatzematge

• Guardeu el vehicle i el comandament a distància en un lloc fresc i sec, allunyat de la llum solar directa i de temperatures extremes.
• Remove batteries from both the vehicle and the remote control if storing for an extended period to prevent leakage.
• Store LiPo batteries at a "storage charge" level (typically around 3.8V per cell) to prolong their lifespan.

7. Solució De Problemes

8. Especificacions

9. Garantia i Suport

For warranty information and technical support, please refer to the documentation provided with your purchase or contact your retailer or the manufacturer directly. Keep your proof of purchase for warranty claims.

Manufacturer: Absima

Número de model: 18029