Manual d'usuari dels llums LED RGB per a acabats interiors d'automòbils Alpena CyberGlow

1. Introducció

The Alpena CyberGlow Automotive Interior Trim RGB LED Lights are designed to provide customizable ambient lighting for your vehicle's interior. This kit includes two flexible LED strips, a control unit, a wireless remote, and a 12V power adapter, allowing for easy installation and personalized lighting effects.

2. Contingut del paquet

Si us plau, comproveu que hi hagi tots els components abans de començar la instal·lació:

• 2 x CyberGlow RGB LED Light Strips (7 ft each)
• 1 x Control Unit with Wiring Harness
• 1 x comandament a distància sense fil
• 1 x 12V Power Adapter (Cigarette Lighter Plug)
• Adhesive Mounting Strips
• Manual d'instruccions

Image 2.1: All components included in the Alpena CyberGlow LED Light Kit. This includes two light strips, a control unit, a remote, a 12V power adapter, and adhesive strips.

3. Informació de seguretat

• Ensure the vehicle's power is off before installation.
• Do not cut or modify the LED strips or wiring harness.
• This product is designed for 12V automotive systems only.
• Avoid installing in areas that obstruct driver visibility or vehicle controls.
• This product is not water resistant. Avoid exposure to moisture.
• Mantenir fora de l'abast dels nens.

4. Configuració i instal·lació

1. Col·locació del pla: Determine the desired locations for the LED strips within your vehicle's interior trim. Ensure the strips can reach the control unit and the control unit can reach the 12V power adapter.
2. Superfícies netes: Thoroughly clean and dry the surfaces where the LED strips will be mounted. Use an alcohol wipe if necessary to remove any grease or dirt, ensuring optimal adhesion.
3. Enganxar adhesiu: Peel the backing from the adhesive mounting strips and firmly press them onto the back of the LED light strips.
4. Mount LED Strips: Carefully peel the remaining backing from the adhesive strips and press the LED strips firmly onto the chosen interior trim surfaces. Apply pressure for several seconds to ensure a secure bond.
5. Connect to Control Unit: Connect the ends of the LED light strips to the corresponding ports on the control unit. Ensure connections are secure.
6. Connectar l'alimentació: Plug the 12V power adapter into your vehicle's cigarette lighter socket.
7. Cablejat segur: Route and secure all wiring to prevent interference with vehicle operation and to maintain a tidy appearance. Use cable ties or clips if needed (not included).

5. Instruccions de funcionament

The Alpena CyberGlow LED lights are operated using the included wireless remote control.

• Botó d'encesa: Premeu el botó ON/OFF botó per encendre o apagar els llums.
• Selecció de color: Use the dedicated color buttons (e.g., Vermell, Verd, Blau, Blanc) to select a static color.
• Ajust de brillantor: Utilitza el Augmenta la brillantor (+) i Brillantor baixa (-) buttons to adjust the intensity of the selected color or mode.
• Selecció del mode: Cycle through various dynamic lighting modes (e.g., flash, fade, strobe, smooth) using the MODE button or specific mode buttons if available on your remote.
• Ajust de velocitat: For dynamic modes, use the Accelera i Accelerar baix buttons to control the speed of the effect.

Ensure the remote control has a clear line of sight to the control unit for optimal performance.

6. Manteniment

• Neteja: Gently wipe the LED strips and control unit with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Comprovació de la connexió: Periodically inspect all connections (LED strips to control unit, control unit to power adapter) to ensure they are secure and free from corrosion.
• Bateria remota: If the remote control's range or responsiveness decreases, replace its battery (typically a CR2025 or CR2032 coin cell, refer to remote for specific type).

7. Solució De Problemes

8. Especificacions

• Marca: Alpena
• Model: CyberGlow (78192E)
• Entrada Voltage: 12V DC
• Tipus de llum: Cintes LED RGB
• Longitud de la tira: 7 ft per strip (2 strips included)
• Control: Comandament a distància sense fil
• Tipus d'ajust: Universal Fit (Automotive Interior)
• Resistència a l'aigua: No resistent a l'aigua
• UPC: 084902781922

9. Garantia i Suport

For warranty information or technical support, please refer to the documentation included with your product or visit the official Alpena weblloc web. Conserveu el comprovant de compra per a reclamacions de garantia.

Fabricant: Alpena

Data de primera disponibilitat: 6 de març de 2023