1. Introducció
Thank you for choosing the Optonica T5 LED Batten Light. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new lighting fixture. Please read these instructions carefully before use and retain them for future reference.
This 12W T5 LED batten light is designed to provide high-quality illumination, equivalent to a 70W traditional light source. It features a natural white 4000K light color, offering a pleasant and balanced ambiance suitable for various indoor environments. With a 120° beam angle and 920lm luminous flux, it ensures uniform and extensive coverage.
2. Informació de seguretat
Important: Desconnecteu sempre l'alimentació abans de la instal·lació, el manteniment o la neteja.
- This product is rated IP20, meaning it is suitable for només per a ús interior and is not protected against water. Do not install in wet or damp ubicacions.
- La instal·lació l'ha de dur a terme un electricista qualificat d'acord amb les normatives locals de cablejat.
- Assegureu-vos el subministrament voltage (AC220-240V) matches the product's requirements.
- No mireu directament a la font de llum LED quan estigui encesa, ja que això pot causar fatiga o danys oculars.
- The light source of this luminaire is not replaceable; when the light source reaches its end of life, the entire luminaire shall be replaced.
- Do not cover the fixture with insulating material.
3. Contingut del paquet
Verifiqueu que tots els components siguin presents abans de començar la instal·lació:
- Optonica T5 LED Batten Light (1 unit)
- Clips de muntatge (2 unitats)
- Connection Cable (13 cm)
- Connector
- Cap final
Descripció de la imatge: This image displays three Optonica T5 LED batten lights of varying lengths, along with a white electrical connector. The batten lights are slim, rectangular fixtures with a frosted diffuser, and the connector is designed to link multiple battens together.
4. Configuració i instal·lació
Seguiu aquests passos per a una instal·lació correcta:
- Desconnecteu l'alimentació: Assegureu-vos que l'alimentació principal de la zona d'instal·lació estigui desconnectada a l'interruptor.
- Marqueu els punts de muntatge: Use the batten light as a template to mark the desired positions for the mounting clips on the ceiling or wall. Ensure the distance between the clips is appropriate for the batten's length (870mm).
- Instal·leu els clips de muntatge: Secure the mounting clips to the marked positions using appropriate screws and wall plugs (not included, choose based on surface material).
- Attach Batten Light: Snap the LED batten light into the installed mounting clips. Ensure it is securely held in place.
- Connectar l'alimentació:
- For single batten installation: Connect the provided 13 cm connection cable to the batten's input port and wire it to your AC220-240V power supply. Ensure correct polarity (Live, Neutral, Earth if applicable).
- For linking multiple battens: Use the provided connector to link battens end-to-end. Connect the power cable to the first batten in the series.
- Tap final segur: Place the end cap on the unused end of the batten or the last batten in a series.
- Restaura l'alimentació: Once all connections are secure and the batten is properly mounted, restore power at the circuit breaker.
Descripció de la imatge: This image shows a single Optonica T5 LED batten light, highlighting its sleek, minimalist design. The light is a long, slender tube with a white diffuser, suitable for discreet installation.
5. Instruccions de funcionament
The Optonica T5 LED Batten Light is designed for simple operation:
- Once installed and connected to the power supply, the batten light will illuminate instantly (0.1 seconds) when the wall switch is turned on.
- To turn off the light, simply switch off the connected wall switch.
- This fixture does not support dimming unless connected to a compatible dimmable power supply and dimmer switch (not included).
6. Manteniment
The Optonica T5 LED Batten Light requires minimal maintenance:
- Neteja: Ensure the power is disconnected before cleaning. Wipe the fixture with a soft, dry, or slightly damp drap. No utilitzeu netejadors abrasius, dissolvents ni productes químics agressius, ja que poden danyar l'acabat o els components elèctrics.
- Inspecció: Periodically check the fixture for any signs of damage, loose connections, or wear. If any issues are found, disconnect power immediately and consult a qualified electrician.
- Font de llum: The LED light source is non-replaceable. If the LEDs fail, the entire fixture must be replaced.
7. Solució De Problemes
If you encounter issues with your LED batten light, refer to the following common problems and solutions:
| Problema | Causa possible | Solució |
|---|---|---|
| La llum no s'encén | Sense font d'alimentació Connexió fluixa Interruptor defectuós | Comproveu l'interruptor de circuit i l'interruptor de paret. Verifiqueu que totes les connexions elèctriques siguin segures. Test the switch with another device. |
| La llum parpelleja | Font d'alimentació inestable Cablejat solt Incompatible dimmer (if applicable) | Ensure stable power. Consult an electrician. Comproveu totes les connexions de cablejat. Remove dimmer or replace with compatible LED dimmer. |
| La llum és tènue | Vol incorrectetage Dust/dirt on diffuser | Comproveu el volum de subministramenttage és AC220-240V. Clean the diffuser with a soft cloth. |
Si el problema persisteix després d'intentar aquestes solucions, poseu-vos en contacte amb el servei d'atenció al client o amb un electricista qualificat.
8. Especificacions
| Característica | Especificació |
|---|---|
| Marca | Optònica |
| Número de model | TU5557 |
| Tipus de llum | LED |
| Consum d'energia | 12 watts |
| Potència equivalent | 70 watts |
| Flux lluminós | 920 lm |
| Temperatura de color | 4000 Kelvin (Blanc Natural) |
| Voltage | AC220-240V |
| Angle del feix | 120 graus |
| Classificació IP | IP20 (només per a ús interior) |
| Dimensions (L x A x A) | 870 mm x 32 mm x 22 mm |
| Vida útil | 25,000 hores |
| Ignition Time | 0.1 seconds (Instant On) |
| Font de llum | LED no substituïble |
| Font d'alimentació | Cable elèctric |
9. Garantia i Suport
This Optonica T5 LED Batten Light is covered by a 2 any de garantia from the date of purchase, ensuring product quality and reliability. The warranty covers defects in materials and workmanship under normal use.
For warranty claims, technical support, or any questions regarding your product, please contact your retailer or Optonica customer service with your proof of purchase and model number (TU5557).
Please note that the warranty does not cover damage caused by improper installation, misuse, accidents, unauthorized repairs, or normal wear and tear.
