Manual d'usuari de la clau mètrica de 12 puntes Titan 62813 amb accionament de 1/2 polzada x 13 mm

Introducció

This manual provides essential instructions for the proper use, maintenance, and care of your Titan 62813 1/2-Inch Drive x 13mm 12-Point Metric Socket. Please read this manual thoroughly before using the product to ensure safe and effective operation.

Producte acabatview

The Titan 62813 is a 1/2-inch drive, 13mm, 12-point metric socket designed for various fastening applications. It features chrome vanadium construction for durability and a mirror polish finish. The socket includes a knurled ring around its base for enhanced grip and stamped sizes for easy identification.

Figure 1: Titan 62813 1/2-Inch Drive x 13mm 12-Point Metric Socket. This image shows a close-up view of the chrome-finished socket, highlighting its 12-point interior and the textured knurled ring at the base designed for improved handling.

Configuració

The Titan 62813 socket requires minimal setup. Follow these steps to prepare for use:

1. Seleccioneu l'eina d'accionament correcta: Ensure you are using a 1/2-inch drive ratchet, breaker bar, or extension that matches the socket's drive size.
2. Connecteu el sòcol: Align the square drive opening of the socket with the drive tang of your chosen tool. Push the socket firmly onto the tool until it clicks into place, indicating a secure connection.
3. Verifica l'ajust: Gently pull on the socket to confirm it is securely attached to the drive tool before applying torque.

Instruccions de funcionament

Using the Titan 62813 socket effectively involves proper selection and application:

1. Identify Fastener Size: Confirm the fastener (nut or bolt head) requires a 13mm metric socket. The socket's size is stamped for easy identification.
2. Posicioneu el sòcol: Place the 12-point end of the socket squarely over the fastener. Ensure the socket is fully seated on the fastener to prevent rounding.
3. Aplicar parell de força: Using your 1/2-inch drive tool, apply steady and controlled force to loosen or tighten the fastener. Avoid sudden jerking motions.
4. Remove the Socket: Once the task is complete, remove the socket from the fastener, then detach it from the drive tool.

Nota de seguretat: Always wear appropriate personal protective equipment, such as safety glasses, when using hand tools. Do not use damaged sockets or drive tools.

Manteniment

Proper maintenance extends the life of your Titan socket:

• Neteja: After each use, wipe the socket clean with a dry cloth to remove dirt, grease, or debris. For stubborn grime, a mild solvent or degreaser can be used, followed by thorough drying.
• Inspecció: Periodically inspect the socket for any signs of wear, cracks, or damage. Discontinue use if any damage is observed.
• Emmagatzematge: Store the socket in a dry environment, preferably in a tool tray or box, to prevent rust and corrosion.

Resolució de problemes

Aquí teniu solucions a problemes comuns que podeu trobar:

• El sòcol s'enganxa al fixador:
  • Ensure the socket size matches the fastener exactly (13mm metric).
  • Verify the socket is fully seated on the fastener.
  • Inspect the fastener head for rounding or damage.
  • Inspect the socket's internal points for wear.
• Socket stuck on drive tool:
  • Apply a small amount of penetrating oil to the connection point.
  • Gently wiggle and pull the socket off the drive tool. Avoid excessive force.

Especificacions

Garantia i Suport

The Titan 62813 1/2-Inch Drive x 13mm 12-Point Metric Socket comes with a Garantia limitada de per vida.

For warranty claims, technical assistance, or product support, please contact Titan customer service. Refer to the official Titan weblloc web o l'embalatge del producte per obtenir la informació de contacte més actualitzada.

També podeu visitar el Titan Store on Amazon for more information about Titan products.