Manual d'instruccions del detector de fum per conductes convencionals APC SL-2000-P

1. Introducció

This manual provides detailed instructions for the proper installation, operation, and maintenance of the APC SL-2000-P Conventional Duct Smoke Detector. This device is designed to detect the presence of smoke within HVAC (Heating, Ventilation, and Air Conditioning) duct systems, providing an early warning of potential fire conditions. Adherence to these instructions is crucial for the detector's optimal performance and your safety.

2. Informació important de seguretat

• Desconnecteu l'alimentació: Always disconnect all power to the HVAC system and the smoke detector before performing any installation, maintenance, or servicing. Failure to do so may result in electrical shock or damage to the unit.
• Personal qualificat: Installation and servicing of this device should only be performed by qualified and authorized personnel in accordance with all local and national electrical codes and standards.
• Advertència de la Proposició 65 de Califòrnia: This product can expose you to DINP, which is known to the State of California to cause cancer. For more information, please visit www.P65Warnings.ca.gov.
• Ús previst: This detector is intended for use as a conventional duct smoke detector. Do not use for purposes other than its specified design.

3. Producte acabatview i Components

The APC SL-2000-P is a photoelectric duct smoke detector designed for reliable smoke detection within air ducts. It features a clear cover allowing visual inspection of internal components and indicators.

Figura 3.1: superior view of the SL-2000-P detector. Visible components include the photoelectric sensor head, a red alarm LED, and a test port.

The detector unit includes provisions for air sampling tubes, which extend into the ductwork to draw air samples for analysis. These tubes are essential for the detector's proper function.

Figura 3.2: lateral view of the SL-2000-P detector with air sampling tube ports. The accessory bag contains the necessary sampling tubes and additional maintenance instructions.

The product packaging provides critical information regarding specifications, certifications, and manufacturer contact details.

Figure 3.3: Product box label detailing specifications, manufacturer information, and certifications.

4. Especificacions

5. Guia d'instal·lació

Proper installation is critical for the reliable operation of the SL-2000-P detector. It is recommended that installation be performed by a certified HVAC or electrical technician.

1. Selecció d'ubicació: Choose a suitable location on the HVAC ductwork where airflow is consistent and representative of the air within the system. Avoid locations near bends, dampers, or other obstructions that may cause turbulence.
2. Muntatge: Securely mount the detector housing to the ductwork using appropriate fasteners. Ensure the unit is level and stable.
3. Aire Sampling Tube Installation: Install the provided air sampling tubes into the designated ports on the detector. The tubes must extend into the duct to capture air samples effectively. Ensure the tubes are cut to the correct length for the duct size and that the intake and exhaust holes are properly oriented.
4. Cablejat: Connect the detector to the appropriate power supply and alarm control panel according to the wiring diagrams provided by the manufacturer (refer to the specific wiring instructions included with your unit). Ensure all connections are secure and comply with local electrical codes. Verify the correct operating voltage (230VAC, 120VAC, 24VDC, or 24VAC) is supplied.
5. Encès: Once all connections are verified, restore power to the HVAC system and the detector. Observe the detector for initial power-up sequence and status indicators.

6. Funcionament

The SL-2000-P detector continuously monitors the air within the duct for the presence of smoke particles. When smoke is detected above a predetermined threshold, the unit will activate its alarm.

• Funcionament normal: During normal operation, the detector's status indicator (if present) will show a steady state, indicating it is functioning correctly.
• Indicació d'alarma: Upon smoke detection, the red LED on the sensor head will illuminate, and the detector will send an alarm signal to the connected fire alarm control panel.
• Prova: The detector can be tested using two methods:
  • Test Port Valve: Introduce approved test smoke into the test port valve to simulate smoke conditions.
  • Magnet Test Capability: Use a magnet near the designated area on the detector to initiate a functional test.
  Regular testing is recommended to ensure the detector is operating correctly.

7. Manteniment

Regular maintenance is essential to ensure the long-term reliability and effectiveness of your duct smoke detector. Refer to the specific

Documents relacionats - SL-2000-P

	Manual d'usuari del teclat de control d'accés APC-KP1-C Manual d'usuari del teclat de control d'accés APC-KP1-C d'APC Automation Systems. Proporciona informació detallada sobre la instal·lació, les especificacions tècniques, les operacions de l'administrador, la configuració de l'usuari, les indicacions de so i llum, i les especificacions del sistema per al control d'accés segur.
	Manual d'instal·lació de l'actuador d'automatització de portes STARK6 STARK12 de la sèrie Proteous d'APC Manual d'instal·lació dels actuadors d'automatització de portes APC Proteous Series STARK6 i STARK12. Proporciona especificacions, instruccions de seguretat, guies d'instal·lació pas a pas, diagrames de cablejat i informació de garantia per a sistemes d'automatització de portes.
	Especificacions tècniques de l'APC Smart-UPS SRT 10000VA 208V Especificacions tècniques detallades per a l'APC Smart-UPS SRT 10000VA 208V, incloent-hi detalls de sortida, entrada, bateria, comunicació, físics, ambientals i de conformitat. Model SRT10KXLT.
	Manual del producte de la central elèctrica de CC APC MX28B600 Aquest manual del producte proporciona informació detallada sobre la planta d'alimentació de CC APC MX28B600, que cobreix la instal·lació, la configuració, el funcionament, les especificacions tècniques i la garantia. Apreneu sobre les seves característiques, components i manteniment amb APC.
	Manual de Funcionament APC Smart-UPS C: Guida Completa Manual de funcionament detagRelació per APC Smart-UPS C (1000/1500/2000/3000 VA, 120/230 Vac, dl.taggio a Rack 2U). Inclou instruccions de seguretat, installazione, funcionament, specifiche tecniche, resolució de problemes i problemes.
	APC-able SL400 Sliding Gate Opener User Manual - Installation, Programming, and Troubleshooting Guide Comprehensive user manual for the APC-able SL400 and SL600 Sliding Gate Openers by APC Automation Systems. Includes detailed installation, technical data, control unit programming, operation modes, troubleshooting, maintenance, and warranty information.