Manual d'usuari del controlador de reproductor multimèdia Novastar T30 Taurus Series

1. Producte acabatview

The Novastar T30 is a multimedia player designed for full-color LED displays. It combines playback and sending capabilities, allowing users to manage and control LED displays using various devices such as computers, mobile phones, or tablets. The T30 supports cloud-based publishing and monitoring platforms, enabling remote management of LED displays.

This device is suitable for commercial LED display applications, including fixed displays, lamp-post displays, chain store displays, advertisement players, mirror displays, retail store displays, door head displays, and shelf displays.

Figura 1: superior view of the Novastar T30 multimedia player circuit board, showing various components, heat sinks, and connectors.

2. Característiques clau

• Capacitat de càrrega: Supports up to 650,000 pixels with a maximum width of 4096 pixels and a maximum height of 4096 pixels.
• Capacitat de processament: Equipped with powerful processing capabilities for efficient display management.
• Dual-Wi-Fi Mode: Features dual-Wi-Fi functionality, allowing switching between Wi-Fi AP (Access Point) and Wi-Fi STA (Station) modes.
• Flawless Playback: Designed for smooth and uninterrupted content playback.
• 4G Module Support: The T30 supports 4G modules for enhanced connectivity. Note that the 4G module is sold separately and must be purchased based on regional network requirements.

3. Instruccions de configuració

3.1 Desembalatge i contingut del paquet

Carefully unpack the Novastar T30 multimedia player and verify all components are present. The standard package typically includes the T30 unit, an antenna, and a power cable. Additional accessories may vary.

Figure 2: Novastar T30 unit shown with its retail packaging, Wi-Fi antenna, and power connection cable.

3.2 Connexions de maquinari

1. Connexió d'alimentació: Connect the provided power cable to the T30 unit and a suitable power source. Ensure the power supply matches the device's requirements (typically 5-12V DC).
2. Connexió de xarxa:
   • Ethernet: Connect an Ethernet cable from your network router or switch to the Ethernet port(s) on the T30.
   • Wi-Fi: Attach the Wi-Fi antenna to the designated connector on the T30. The device supports dual-Wi-Fi modes (AP and STA).
   • 4G (opcional): If 4G connectivity is required, install a compatible 4G module (purchased separately) into the designated slot.
3. LED Display Connection: Connect the T30's output ports to your LED display's receiving cards using appropriate cables. Refer to your LED display's documentation for specific connection details.
4. Connexions perifèriques: Connect any other necessary peripherals such as USB devices or sensors to the available ports.

Figura 3: Angle view of the T30 board, highlighting Ethernet ports, USB ports, antenna connectors, and power input.

Figure 4: A different angled perspective of the T30 board, providing a clearer view of the SIM card slot and other peripheral connectors.

3.3 Configuració inicial

After connecting the hardware, the T30 requires initial configuration using Novastar's dedicated software. This software allows you to set up network parameters, display resolutions, and content playback schedules. Refer to the official Novastar documentation for detailed software configuration guides.

For relevant configuration software and instructions, please visit: Novastar T30 Documentation

4. Instruccions de funcionament

4.1 Content Publishing

Content can be published to the T30 using various methods:

• Programari de PC: Use Novastar's PC-based software to create, upload, and schedule content.
• Dispositius mòbils: Control and publish content via dedicated mobile applications on smartphones or tablets.
• Control LAN: Manage the device over a local area network.
• Cloud Platform: Utilize Novastar's cloud-based publishing and monitoring platforms for remote, centralized content management and display monitoring from any Internet-connected device.

4.2 Control de la pantalla

The T30 allows for comprehensive control over connected LED displays, including brightness adjustment, power on/off scheduling, and display mode switching. Specific control functions are accessible through the configuration software and cloud platform.

Sincronització: For applications requiring high synchronization precision, a time synchronization module is recommended. Please consult Novastar technical staff for details on acquiring and integrating this module.

5. Manteniment

To ensure optimal performance and longevity of your Novastar T30, follow these general maintenance guidelines:

• Condicions ambientals: Operate the device within its specified temperature and humidity ranges. Avoid exposure to extreme temperatures, direct sunlight, and high moisture environments.
• Neteja: Gently clean the exterior of the device with a soft, dry cloth. Do not use liquid cleaners or solvents. Ensure ventilation openings are free from dust and obstructions.
• Actualitzacions de firmware: Regularly check for and install official firmware updates from Novastar to benefit from performance improvements and new features.
• Font d'alimentació: Use only the recommended power adapter. Disconnect power during periods of non-use or during electrical storms.

6. Solució De Problemes

This section provides basic troubleshooting steps for common issues. For more complex problems, refer to the official Novastar support resources or contact technical support.

7. Especificacions

8. Garantia i Suport

For technical assistance, detailed documentation, or warranty inquiries, please refer to the official Novastar support channels. You can find comprehensive resources and contact information on the Novastar weblloc.

For specific configuration software and instructions, please visit the official Novastar documentation portal: Novastar T30 Documentation

If you require a time synchronization module for high-demand applications, it is recommended to consult directly with Novastar technical staff for guidance and purchase.