Introducció
This user manual provides detailed instructions for the installation, maintenance, and troubleshooting of replacement components for the PATPET P680 Series Dog Training Collar. These components include the Electric Shock Column, Conductive Rubber Sleeve, and Shock Shrapnel, designed to ensure the continued optimal performance of your training device.
Image: A man with a golden retriever, representing the bond between pet owners and their dogs, and the purpose of training tools.
Contingut del paquet
Upon opening your package, please verify that all the following components are present and undamaged:
- Electric Shock Columns: These are the primary contact points for the training collar.
- Conductive Rubber Sleeves: Designed to cover the shock columns, providing comfort and preventing direct metal contact with the dog's skin while maintaining conductivity.
- Shock Shrapnel: Internal components related to the shock mechanism.
Imatge: Una clara view of the PATPET replacement parts, including black rubber sleeves, silver contact points (electric shock columns), and small metal shrapnel pieces.
Configuració i instal·lació
Proper installation of these components is crucial for the safe and effective operation of your PATPET P680 Series training collar. Always ensure the collar is turned off before handling components.
- Eliminar components antics: Carefully unscrew or detach any worn or damaged electric shock columns and conductive rubber sleeves from the collar receiver.
- Install Electric Shock Columns: Screw the new electric shock columns firmly into the designated ports on the collar receiver. Ensure they are snug but do not overtighten.
- Apply Conductive Rubber Sleeves: Slide the conductive rubber sleeves over the newly installed electric shock columns. These sleeves should fit snugly and cover the metal points.
- Install Shock Shrapnel (if applicable): If replacing internal shock shrapnel, refer to the specific P680 Series collar's main manual for detailed internal assembly instructions, as this may require opening the receiver unit. For most users, this component is not typically replaced externally.
Image: A grey PATPET P680 Series collar, showing where the components attach.
Image: A green PATPET P680 Series collar, illustrating the receiver unit.
After installation, ensure all components are securely fastened and the conductive rubber sleeves are properly positioned to prevent direct skin contact with the metal points.
Principis de funcionament
The Electric Shock Columns, in conjunction with the Conductive Rubber Sleeves, are designed to deliver static stimulation from the training collar to the dog's skin. The rubber sleeves are crucial for diffusing the stimulation and ensuring comfort, while the columns provide the necessary contact. The Shock Shrapnel is an internal component that facilitates the electrical circuit within the collar's receiver unit.
Manteniment
- Neteja: Regularly clean the electric shock columns and conductive rubber sleeves with a damp cloth to remove dirt, oil, or debris that may accumulate. Ensure they are completely dry before re-attaching to the collar.
- Inspecció: Periodically inspect the conductive rubber sleeves for signs of wear, tears, or damage. Replace them immediately if any damage is observed to ensure proper function and the dog's comfort. Check the electric shock columns for corrosion or bending.
- Emmagatzematge: Store replacement components in a cool, dry place away from direct sunlight and extreme temperatures to prolong their lifespan.
Resolució de problemes
If you experience issues after replacing components, consider the following:
- No Stimulation/Weak Stimulation:
- Ensure the electric shock columns are screwed in tightly.
- Verify the conductive rubber sleeves are not damaged and are properly seated.
- Check the dog's fur for excessive thickness that might prevent proper contact; consider trimming if necessary.
- Ensure the collar receiver itself is charged and functioning correctly.
- Irritació de la pell:
- Confirm the conductive rubber sleeves are always used and are not damaged.
- Ensure the collar is not too tight on the dog's neck.
- Clean the contact points and the dog's neck regularly.
For persistent issues, refer to the main PATPET P680 Series collar manual or contact PATPET customer support.
Especificacions
| Característica | Detall |
|---|---|
| Pes de l'article | 0.317 unces |
| Material | Rubber (for sleeves) |
| Fabricant | Shenzhen Patpet Technology Co., Ltd. |
| Dimensions del paquet de l'article | 5.31 x 2.99 x 0.47 polzades |
| Compatibilitat | PATPET P680 Series Dog Training Collars |
Garantia i Suport
PATPET stands behind the quality of its products. For information regarding warranty coverage, returns, or technical support, please visit the official PATPET weblloc web o contacteu directament amb el seu departament d'atenció al client. Conserveu el rebut de compra com a comprovant de compra.
For further assistance, you may also refer to the PATPET store on Amazon: PATPET Amazon Store.
