1. Introducció
This manual provides essential information for the safe and efficient operation, installation, and maintenance of your Mastervolt Chargemaster Plus 12/50-3 Battery Charger. Please read this manual thoroughly before installation and use to ensure optimal performance and longevity of the product.
The Mastervolt Chargemaster Plus 12/50-3 is an advanced automatic battery charger designed for marine and other demanding applications, providing reliable and fast charging for various battery types.
2. Informació de seguretat
Seguiu sempre les precaucions de seguretat següents per evitar lesions personals o danys a l'equip.
- Risc elèctric: Installation and maintenance must be performed by qualified personnel only. Disconnect all power sources before servicing.
- Risc d'explosió: Batteries can produce explosive gases. Ensure adequate ventilation when charging. Do not smoke or allow open flames near batteries.
- Exposició a l'aigua: This unit is designed for marine use but should not be submerged. Protect from excessive moisture and spray.
- Temperatura: Do not operate the charger in environments exceeding specified temperature limits. Ensure proper ventilation around the unit.
- Cablejat adequat: Use correct wire gauges and ensure all connections are secure to prevent overheating and fire hazards.
3. Contingut del paquet
Verifiqueu que tots els elements siguin presents al paquet:
- Mastervolt Chargemaster Plus 12/50-3 Battery Charger Unit
- Manual d'usuari (aquest document)
- Mounting Hardware (screws, washers)
- Connection Terminals (if applicable)
4. Característiques del producte
The Mastervolt Chargemaster Plus 12/50-3 offers several key features for efficient battery charging:
- Multi-stage charging for optimal battery health.
- Compatibility with various battery chemistries (Lead-Acid, Gel, AGM, Li-ion).
- Multiple isolated outputs for charging several battery banks simultaneously.
- Integrated Digital Display for status monitoring.
- Compact and robust design for marine environments.

Figura 4.1: Frontal view of the Mastervolt Chargemaster Plus 12/50-3 Battery Charger, showing the control panel and indicators.

Figura 4.2: De dalt a baix view of the Mastervolt Chargemaster Plus 12/50-3 Battery Charger, highlighting the ventilation grilles.
5. Configuració i instal·lació
Proper installation is crucial for the safe and efficient operation of your charger.
5.1 Ubicació de muntatge
- Choose a dry, well-ventilated location, protected from direct sunlight and excessive heat.
- Ensure sufficient clearance around the unit for airflow (minimum 10 cm on all sides).
- Mount the charger vertically on a solid surface using the provided mounting hardware.

Figura 5.1: posterior view of the Mastervolt Chargemaster Plus 12/50-3 Battery Charger, illustrating the mounting brackets and connection points.
5.2 Connexions elèctriques
- Entrada de CA: Connect the AC input cable to a suitable shore power or generator supply. Ensure the circuit is protected by an appropriate circuit breaker.
- Sortida de corrent continu: Connect the positive (+) and negative (-) output cables from the charger to your battery banks. Use appropriate fuse protection for each battery bank.
- Posada a terra: Ensure the charger chassis is properly grounded to the vessel's ground system.
- Remote Control/Sensors (Optional): If applicable, connect remote control panels or temperature sensors according to their respective manuals.
Refer to the wiring diagram provided in the separate installation guide for detailed connection instructions.
6. Instruccions de funcionament
6.1 Engegada inicial
- After all connections are secure, switch on the AC power supply to the charger.
- The charger will perform a self-test, and indicators will illuminate.
- El carregador detectarà automàticament el volum de la bateriatage and begin the charging cycle.
6.2 modes de càrrega
The Chargemaster Plus features intelligent multi-stagCarregant:
- A granel: Maximum current delivered to rapidly charge the battery.
- Absorció: Voltage held constant while current decreases, topping off the battery.
- Flotador: Vol baixtage maintenance charge to keep batteries fully charged without overcharging.
6.3 Tauler de control i indicadors
The front panel includes LED indicators for charging status and error conditions. Consult the detailed diagram in the full manual for specific indicator meanings.
7. Manteniment
Regular maintenance ensures optimal performance and extends the lifespan of your charger.
- Neteja: Netegeu periòdicament l'exterior del carregador amb un drap sec i suau. Assegureu-vos que les obertures de ventilació estiguin lliures de pols i deixalles.
- Connexions: Annually inspect all electrical connections for tightness and corrosion. Tighten any loose connections and clean corroded terminals.
- Ventilació: Ensure the area around the charger remains clear to allow for proper airflow and heat dissipation.
- Inspecció de la bateria: Regularly check your batteries for fluid levels (if applicable), terminal corrosion, and overall condition.
Always disconnect AC power before performing any maintenance.
8. Solució De Problemes
This section provides solutions to common issues. For more complex problems, contact Mastervolt support.
| Problema | Causa possible | Solució |
|---|---|---|
| El carregador no s'encén | No AC input power; Blown fuse/breaker; Loose connections. | Check AC power source; Inspect and replace fuses/reset breakers; Verify all connections are secure. |
| La bateria no es carrega | Incorrect battery type setting; Faulty battery; Loose DC connections. | Verify battery type setting; Test battery condition; Check DC output connections. |
| Error de sobreescalfament | Insufficient ventilation; Ambient temperature too high; Internal fault. | Ensure adequate airflow around the unit; Relocate to a cooler area; Contact support if problem persists. |
9. Especificacions
Key technical specifications for the Mastervolt Chargemaster Plus 12/50-3 Battery Charger:
- Model: 44310505
- Entrada Voltage: AC (range typically 90-265V, consult product label)
- Vol. De sortidatage: 12 Volts DC
- Corrent de sortida: 50 Amps
- Nombre de sortides: 3 sortides aïllades
- Dimensions (LxWxH): Aproximadament 11.46 x 4.13 x 8.27 polzades (29.1 x 10.5 x 21 cm)
- Pes: Aproximadament 5.5 lliures (2.5 kg)
- Material: Recinte de plàstic
- Normes de seguretat: Conforme a UL
10. Garantia i Suport
Mastervolt products are backed by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Mastervolt weblloc.
For technical support, service, or spare parts, please contact Mastervolt customer service or an authorized Mastervolt dealer. When contacting support, please have your product model number (44310505) and serial number ready.
Mastervolt Official Weblloc: www.mastervolt.com





